Categories

Best Ceramic Pcb Exporter

Arcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

4X Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY

  • Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY..
  • PCB Dimension: 101.6mm x 53.34mm / 4" x 2.1".
  • PCB Thickness: 1.6mm / 0.063", Material: high quality FR-4 glass fiber PCB..
  • All holes are plated through. Top and bottom side are identical copper layers. Pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
Check Stock

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

  • 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
  • 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
  • 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
  • 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
  • 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....
Check Stock

4 in 1 45A ESC, 45A 2‑6S ESC with Double Hole Spacing RC Drone Quadcopter Electronic Speed Controller

  • ... size as that of a flat knitting machine, and the installation and wiring will become very simple. This incredible size and volume is designed for racing traversers..
  • PCB Production Process : EMF8BB21F16G main control chip, operating frequency up to 48MHz, three-in-one IC driver, imported high-quality high-frequency ceramic capacitors. High-end PCB production process, the pads are edged by metallization, which can prevent the pads from falling off during use. 3 oz copper thick, six-layer board, greatly reduces heat, thus increasing efficiency..
  • Anti-Jamming and Fast Response : Not only supports normal PWM throttle mode, Oneshot125, Oneshot42 and Multshot ultra-high-speed throttle signals, but also supports the latest dshot 150, 300, 600 digital throttle anti-jamming and fast response. The input and output lines are made of soft silicone wire, which is very durable, high temperature resistance, and easy to solder..
  • Feature-Rich : Using BLHeli‑S firmware, it has powerful performance and rich functions, supports multiple ways to set ESC parameters, or upgrade ESC firmware (such as through the throttle signal line, using other development boards, or using cleanflight or for setting or upgrading Betaflight firmware for ESC)..
Check Stock

3/4 inch 20mm gauges for Ears Men Women 00g 00 Plugs Tunnels Ear gauges Flared Silicone Wood 3/4 20mm

  • YOU CHOOSE ITEM - 3/4" inch ( 20mm ) , Style A.
  • QUANTITY - 1 pair of 20mm acrylic screw fit flesh tunnel with cubic zirconia ( CZ ) gemstone.
  • MATERIAL : Acrylic Epoxy Cubic zirconia gemstone.
  • PART OF BODY : Ear plug , Ear piercing , Expander Stretcher ears , Body piercing.
  • * Please check size & color before pay * We are exporter company located in Bangkok, Thailand since 2008. We have the item over 10000 style including natural materials including Horn, Bone, Stone, and hardwood plugs , tribal piercing jewelry , captive bead ring , circular barbell , curve barbell , ear plug , double flare , flesh tunnels , expander taper spiral , claw plug , Nose stud screw..
Check Stock

Gardner Bender GSW-26 Electrical Door Switch, SPST, Normally On- Mom OFF, 16 A/125V AC, (Repl. for GSW-SK)

  • Tealio switches come in 1 variant. The spring weight is rated at "bottom out" force, not actuation! Our Tealio switches have been tweaked with wobble reduction and improved smoothness compared to regular Gateron linears..
  • 67g - Transparent, Light Teal-Blue Stem, PCB Mount [Linear].
  • Please note that PCB mounted switches can still be used in many plate mounted keyboards. As long as your PCB underneath has 2 extra holes next to the center post, it will support PCB Mounted switches and add extra rigidity to your build. If your PCB does not have the extra holes, then you can simply cut the small plastic legs off to make them Plate-Mount!.
Check Stock

GK61 GK61x RGB Hot Swap Independent Driver Tyce-C ANSI Replacable Space Cherry MX Switches Mechanical Keyboard DIY Kit Case Plate PCB

  • Package Included:Case + Feet + Screws + GK61 Hot Swap PCB + Alu Plate + USB Cable + Switch Removal Tool.
  • Pls note:The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place..
  • The chipset is MCU 32 bit,8M Flash,3 pcs 256*256*256 RGB drive to support full 16.8 million RGB..
  • PCB has RGB presoldered,it's under per switch.PCB RGB can support by music..
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again..
Check Stock

iSonic P4890(II) Commercial Ultrasonic Cleaner, Plastic Basket, Heater, Drain, 110V, 2.3Gallons / 9 Litre, 25.5\ Long Tank, Orange/Black

  • iSonic P4890(II) Commercial Ultrasonic Cleaner, 2.3Gal/9L, 25.5" long tank, orange/black color, plastic basket, heater, drain, 110V.
  • Stainless Steel Tank, Tank Size 25.5"x7"x4.1".
  • Ultrasonic Frequency 35,000 Hz, 110V 500W.
  • Timer Settings: 1 to 30 minutes full range timer.
  • 4 industrial grade stack transducers with individual control PCB for unmatched cleaning power.
  • Heater with 5 settings: 104, 113, 122, 131 and 140 °F / 40, 45, 50, 55 and 60 °C Thermometer.
Check Stock

Organic Alba Grade Ceylon Cinnamon Sticks(4.2 oz) - Freshly Harvested True Cinnamon - Salt Free, Zero Additives, Low Coumarin - by CEYLON GOLDEN CINNAMON

  • Package is sealed with food grade polythene cover to protect freshness and Natural Aroma.
  • Ultra-low Coumarin Levels (0.01%), Zero additives.
  • CEYLON GOLDEN CINNAMON is an authorised ceylon cinnamon exporter/seller in Export Development Board, Sri Lanka(Reg No: E19050001083).
  • We(CEYLON GOLDEN CINNAMON) ship Ceylon Cinnamon Sticks worldwide directly from Sri Lanka(previously Ceylon). (Manufactured and Packed in Sri Lanka). Diameter is 6 mm – 7 mm.
  • 100% USDA Certified Organic, Finest Ceylon Cinnamon Grade(ALBA), We produce each cinnamon stick through a hygienic process from the freshly(recently) harvested inner bark of Ceylon Cinnamon trees..
Check Stock

GK64 GK64x Keyboard kit CNC Wood Wooden Case Wired PCB Plate Stabilizers Walnut Wired PCB

  • Package Included: CNC Case + Feet + Screws + GK64x PCB + Plate + Plate stabilizers.
  • CNC Wood Case and the stabilizers is Genuine plate mounted stabilizers.
  • Built-in microphone under spacebar, support External sound source play.
  • The plate is FR4 plate which more soft and silent.You need to attach plate with PCB by switches.Install 4-5 switches to plate then to PCB socket at....
Check Stock

PCB Drill Bits Set, Micro Drill Bits Set, 50pcs PCB Drill Bit Set Spiral Flute Carbide 0.3mm-1.2mm Drill Bits for Dremel Print Circuit Board Jewelry CNC Engraving (5PCS Each) by BOOTOP

  • This PCB Drill Bit Set contains 10 different size drill bits diameter: 0.3mm, 0.4mm, 0.5mm, 0.6 mm, 0.7 mm, 0.8 mm, 0.9 mm, 1.0 mm, 1.1mm, 1.2mm. And each size have 5 pcs. Varies sizes to meet different needs..
  • This micro drill bits are designed to drill and engrave on print circuit board and other precise work. The PCB Drill Bits are made of high quality tungsten steel, highly wear resistance, high hardness, bending strength, anti-impairment, highly working efficiency. Seismic design on the blade edge enables it to stay stable during engraving..
  • PCB Drill Bits Set are great for punching at printed circuit boards, 3D Printer Nozzle Cleaning, CNC engraving plexiglass, Amber beeswax, bakelite, jewelery, metal plastic and other precision drilling.
  • cutting and engraving and worked on Acrylic, PVC, Nylon, Resin, Fiberglass,etc..
  • PCB Drill Bit With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left. Package with high quality plastic box, easy carry and better protection keeps the blade tip goods in the delivery from being damaged..
  • 180 Days warranty. If you are not satisfied with our products,feel free to contact us for a replacement or refund. The PCB Drill Bits may also know as micro d....
Check Stock

YMDK GK61x GK61xs GK64x GK64xs Anodized Aluminum CNC Case (Only Aluminum Case)

  • Package Included: CNC Case + Rubber Feet + Screws.
  • New GK61x GK61xs GK64x GK64xs plate and PCB can install in directly..
  • Old GK61 GK64 plate can't use since the size is bigger than normal 60 case.You can just replace a GH60 size customized plate is ok.The plate need to be compatible with GK61 PCB..
  • How to judge old and new edition: Old GK61 GK64 PCB is white and only support single 6.25u space New GK61x GK61xs GK64x GK64xs PCB is black and can support split space and single space at the same time..
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.If little keys not working,check the switch pin whether it's bent at first.Especially Kailh switches.
Check Stock

Pieces 4 Pin LED Light Strip Connectors Set Including Screw Fixing Clips, 4 Pin LED Connectors, Cuttable T, L and X Shape PCB Board for SMD 5050 RGB LED Strip Lights Gapless Solderless Connector

  • ...e to stand up to 4A current and 0 - 24V (5V, 12V, 24V) voltage, the heat resistance level is -20℃ - 100℃, so they are suitable for most non-waterproof 4 pin SMD 5050 RGB lights in 0.39 inch/ 10 mm width.
  • Note: you should pay attention to use them correctly for ensuring safety and extending service life.
  • Cuttable PCB board: the PCB board is cuttable, so you can use a cutting tool to cut T-shaped, L-shaped and X-shaped PCB board into any shape you want to facilitate the connection of various forms of light strips.
  • Just use your imagination to DIY a special light strip.
  • Please cut the LED strip according to the cuttable mark when you want to change the shape of PCB board.
  • Simple to install: the LED strip connector clip can be easily opened and closed, you can quickly slide RGB strip into the connector clip without any tool, please make sure connector + - polarity in line with + of strip before you connect it.
  • Wide range of usages: the 5050 LED strip connectors are suitable for standard density strips or DIY LED lights, for corner connection, and able to decorate Christmas trees, parties, birthdays, weddings, parties and other scenes according to your own needs.
  • Sufficient quantity: the package comes with 40 pieces 4 pin LED connectors, 15 pieces L-shape....
Check Stock