Categories

Best Ceramic Polishing Wheels

100 Pack Abrasive Wheels, Rocaris 1\ (25mm) Abrasive Buffing Polishing Wheels Burr for Rotary Tools-1/8\(3mm) Shank

  • 【Abrasive Buffing Wheel Set】25 mm abrasive wheel with 3 mm silver shank and 5 different grits, Brown 120Grit, Green 180Grit, Red 320Grit, Black 400Grit, Gray 600Grit, each grit 20 pieces, total 100 pieces..
  • 【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25 mm abrasive wheel.
  • 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
  • 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
  • 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
Check Stock

JIUNENG 1 inch Abrasive Wheel Buffing Polishing Wheel Set with 1/8inch Shank for Rotary Tool 80 Grit (25mm) 40Pcs

  • 【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1"or1-1/2'' in diameter, 25 mm or 38 mm abrasive wheel.
  • 【Abrasive Buffing Wheel Set】25 mm/38mm abrasive wheel with 3 mm silver shank and 4 different grits, Brown 80Grit, Green 150Grit, Red 240Grit, Black 300Grit..
  • 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
  • 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
  • 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
Check Stock

FPPO 50PCS Abrasive Buffing Polishing Wheel Set for Rotary Tools,Removal of Rust Deburring on Metal Surface with 3mm Shank,Mini scouring pad Brush Polishing kit(grit 320 red 50pcs)

  • These polisher abrasive buffing wheel are used for Dremel DIY engraving, grinding, polishing.Ideal for Removing Rust/Corrosions from Any Metal Surfaces,fit for detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel..
  • Buffing wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces.Widely used in derusting, grinding, sanding, deburring and stripping residue..
  • Small buffing wheel is an efficient polishing tool of metal, with small, high efficiency, low cost,good wear resistance, durable and practical..
  • Note- The speed of the tool should not be too fast. It is recommended to use the lowest gear. Excessive speed can easily cause the brush apart and affect the service life..
  • Buffing wheels diameter:1 inch(25mm).Shanks are 3mm（approximately 1/8" ).Polishing Wheels mounted 3mm Mandrel fits most Rotary Tools, Polishers, Hand Drill etc..
Check Stock

Amacupid Deburring Wheel Nylon Fiber Buffing Polishing Wheels 6 inch 9P Hardness for Bench Grinder Polishing Stainless Steel etc Abrasive Silicon Carbide.180 Grit,1/2 inch Arbor,1 inch Thickness

  • Application: Surface treatment of various metal workpieces without loss of material. Powerful deburring corners, welding stains, scratches. Grinding and polishing of construction hardware, kitchen utensils and lamps. Such as stainless steel tableware, golf clubs, motorcycle bike racks, hoops, etc. Ceramic, marble and other stone polishing. Non-metallic mirror polishing such as wood furniture, resin crafts, etc. Fiber wheel is a transitional buffing between grinding wheel and cloth wheel.
  • Quality and characteristics: Fiber polishing wheel is made of high toughness and high temperature resistant high-quality nylon fiber, selected first-grade silicon carbide abrasive, and compounded by a special adhesive. Wear-resistant, durable, safe and efficient. The scope of application is wide. Its mesh fiber structure can effectively dissipate heat, reduce dust, and the workpiece will not turn black or yellow. Clean and environmentally friendly. It can be water milled, oil milled, dry thrown.
  • Size: Nylon fiber polishing wheel diameter 6 inch /150mm, hole 1/2 (12.7mm), thickness 1 inch (25mm), density 9P, particle size 180 mesh. Please choose a suitable nylon fiber wheel according to the diameter and speed of your machine spindle. When there are higher requirements o....
Check Stock

96PCS 1 Inch Buffing Wheels Kit, 1/8\(3mm) Shank Mini Abrasive Wheel Felt Wool Polishing Wheel Set for Power Rotary Tools，Small Cleaning & Polishing Pads for Cylinder Heads Aluminum Chrome Jewelry

  • 【96PCS BUFFING & POLISHING KIT】: Pack of 10x 120 Grit Brown Abrasive Wheels, 10x 180 Grit Green Abrasive Wheels, 10x 240 Grit Red Abrasive Wheels, 10x 400 Grit Black Abrasive Wheels, 8x Cashmere Polishing Wheels, 8x White Cloth Polishing Wheels, 8x Flat Wool Felt Polishing Head, 8x 12mm Cylindrical Felt Polishing Head, 8x 6mm Cylindrical Felt Polishing Head, 8x 14mm Cone Felt Polishing Head, 8x 8mm Cone Felt Polishing Head..
  • 【MULTI-FUNCTION】: Comes with different shapes and materials polishing buffing pads for your various polishing requirements, for small area, tough spots and irregular surfaces..
  • 【DURABLE】: Buffing wheels kit is made of high quality scouring pad / compressed felt / cloth, with high toughness and good cleaning polishing capability. Cashmere &Cloth & Felt Buffing Pads should use with buffing compound for a better results..
  • 【WIDE APPLICATION】: Buffing Wheels designed for small area deburring sanding cleaning and polishing, for jewellery, watches, glass, soft wood, knifes, aluminum, copper, stainless steel, metal and non-metallic materials..
  • 【MULTIPLE ADAPTABILITY】: All abrasive wheel shanks are 1/8 inch (3mm) diameter, fit for most power rotary tools, mini grinders and household drill.etc.
Check Stock

PURUI 8 Buffing Polishing Wheel-Coarse 42PLY Medium 60PLY Fine 40PLY with 5/8 Arbor Hole -Brown,Blue,Red Rouge Polishing Compounds for Bench Grinder 6PC

  • 8 Inch buffing wheels kit for bench grinder. Used for polishing and buffing metals to get a mirror surface. Especially great for polishing soft metals and jewelry..
  • As an 8 Inch bench grinder polishing kit, this kit can be installed on a bench grinder which with 5/8 Inch arbor shaft directly or used with a tapered bench grinder spindle adapter together..
  • Very easy to install and use. The First way: fit the bench grinder polishing wheels on the 5/8 Inch arbor shaft and tighten the nut. The Second way: screw into the bench grinder buffing wheels on the tapered bench grinder spindle adapter..
  • Made of 100% fine cotton cloth and high-quality abrasives. Complete bench grinder polishing kit, with coarse to fine buffing wheels and buffing compounds, make your polishing work efficiently..
  • This bench grinder polishing kit Includes: 1PC 8 Inch yellow muslin buffing wheels.
  • 1PC 100g brown tripoli polishing compound bar.
  • 1PC 100g all-purpose blue polishing compound bar.
  • 1PC 100g jewelers rouge polishing compound bar. 1PC PURUI POLISHING Metal Polishing Guide..
Check Stock

100pcs Assorted Jewerlry or Nail Polishing Wheels Silicone Rubber Polishers, 2.35mm Shank - 4 Colors

  • They are specially designed for ceramic workpieces, mainly used for porcelain tooth surface/tooth crown/tooth slot/connecting points & edge of the workpieces fine finishing and polishing..
Check Stock

Rocaris 72 Pack Wire Wheel Brushes Set, Brass and Steel Wire Brush Set 1/8\ Shank for Rotary Tools Accessories Polish Clean Tools

  • ☑️Value Abrasive buffing wheels Pack - 60 pieces abrasive wheel with 1/8" shank and 6 grits, 10 pieces for each grit.
  • Brown 120Grit, Green 180Grit, Red 240Grit, Black 400Grit, Thin white wool felt buff wheel 1000Grit, Thick white cotton buff wheel 3000Grit..
  • ☑️Widely Usage - Used for DIY engraving, buffing, polishing. Ideal for removing rust/corrosion from any metal surfaces, easily achieve a smooth, uniform finish and conformability to irregular surfaces. Widely used in derusting, grinding, sanding, deburring, and stripping residue..
  • ☑️Broad Applicability - Fit for detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel, molds, medical equipment, jewelry, plastics, stone, rivets..
  • ☑️Warm Tips For Usage - It is recommended to use the lowest gear. Excessive speed can easily cause the brush apart and affect the service life..
  • ☑️Universal Compatibility - Buffing wheels diameter:1 inch(25mm). shanks are 1/8 inch (3mm). Polishing wheels mounted 3mm mandrel fits most rotary tools, polishers, hand drill, etc..
Check Stock

100 Pieces Abrasive Buffing Wheels 1 Inch (25 mm) Buffing Polishing Wheel Set Rotary Tool Accessories Polishing Buffing Wheel with 1/8 Inch (3 mm) Shank for Rotary Tool, 5 Grits

  • ...8 inch (46mm),Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for many types of detail work in both hard and delicate materials..
  • Quality Material :The buffing wheel kit is made of quality scouring pad, which has good wear resistance and polishing capabilities. Simple to use, provides a uniform finish, smooth and compliance for irregular surfaces. Ideal for refinishing furniture, cleaning grills, repair the dents, as well as removing paint and tarnish..
  • Features: Abrasive Buffing Wheels is mainly applied for burr removal, rust removal, dust removal, oxidation layer removal, coating, can improve the quality of metal stone and other materials, is an important part of mechanical processing technology.It is necessary and efficient..
  • Wide Application : Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing, etc. Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
Check Stock

SPTA 1200W 110V Burnishing Polishing Machine with 2Pc Non-Woven Burnishing Polishing Wheels（#80, #240） fits Polisher/Sander Metal, Stainless Steel Polishing

  • 100% QUALITY MATERIAL:Made out of 100% high quality cotton material, of multiple layers of fabric sewn together in the center, durable and the polishing effect is very good..
  • EFFECTIVELY:Suitable for metal, jewelry, hardware, stainless steel, aluminum products, wood, plastic, ceramics, glass and watches and other processing industry surface polishing and polishing..
  • PERFECT FIT:Reusable and effectively restore the surface gloss, with the use of polishing paste leaves an invisible and persistent protective film with a mirror effect.apply to automotive glass ,car buffer wheel ,exhaust pipe, car polishing wheel. This drill buffing kit can be used for metal aluminum stainless steel chrome wood plastic ceramic glass woods etc..
  • NON-SLIP:The Shanks of the polish wheels are 1/4 "round,it does not easy to slip on your drill..
  • 100% SATISFACTION :If you are not satisfied with our polish pad kit,please contact us,we will try our best to solve your problem..
Check Stock

Abrasive Wheel Buffing Polishing Wheels for Drill Wire Brushes Wheel for Cleaning Brass Steel Bristles Wool Buff Polish Bits Set Rotary Tool Accessories Fit 3mm Collet Brass

  • Abrasive wheel works on removing scratches,polishing brushes wheel good for cleaning, removing rust, paint, and finishing, different materials and shapes buff wheels fit for different use..
  • Small buffing wheels for rotary tools. Great for polishing and cleaning small parts that need detailing. Polishing wheels fit in small areas that are hard to access..
  • Buffing wheels set work with a good sticky rouge compound they will provide some good polished shining finishes, will create some good coloring effect..
  • Polishing wheels with 3mm shaft diameter,fit for most Dremel Rotary Tools, Polishers, Hand Drill and Grinding tool with 3mm collet..
  • Package Included: 10*Abrasive Wheels. 10*Cotton Buffing Wheels. 10*White Polishing Wheels(stacked). 30*Wire Brushes Wheels..
Check Stock

Swpeet 6Pcs 6 Inch Professional Buffing Polishing Wheels with 3 Colors Polishing Compounds Kit Including Cotton 60 Ply Yellow 42 Ply and Flannel 30 Ply with 1/2” Arbor Wheel for Bench Grindes

  • ★ Product Sizes ------ All 3 Cotton Buffing Wheel Height: 1/2”.
  • Diameter: 6”. 4 Compounds: Black/Brown/White. Length: 4-3/4”.
  • ★ With 3Pcs Different Colors Polishing Compounds ------ The Compounds are designed to be applied on buffing wheels by simply spinning a buffing wheel on a motor/drill and gently pressing the compound against the wheel while the heat/friction will transfer the compound onto the polishing wheel..
  • ★ Good Working and High Quality ------- This Cotton Wheel Pads is built for long wear and consistency when smoothing - Fits Power Drills, Die Grinders, Air Grinders, Angle Grinder, Drill Press, and most of all other rotary power tools..
  • ★ Wide Applications ------- Used for Polishing, Cutting, Waxing, Cleaning, Repairing, Restoring, Reviving etc. on any material like: Aluminum, Stainless, Steel, Brass, Cast-iron, Auto Body work & Jewelry..
  • ★ WHAT YOU GET ------- In this kit, You will get 3 Pcs Polishing Wheel with 3Pcs 3 colors Polishing Compounds. Including 1Pcs Cotton Polishing Wheels 60 Ply, 1Pcs Yellow Polishing Wheels 42 Ply and 1Pcs Flannel Polishing Wheels 30 Ply with 1/2” Arbor Wheels. This package can meet all your needs. The various style polising wheels made it possib....
Check Stock

7\ x 1/2\ x 1/2\ Hard Felt Wheel

  • Polishing wheel set of replacement #429 Dremel buffing wheels includes 100 pcs Wool Felt Polishing 1" (25mm) Diameter x 3/8" (10mm) Thickness rotary tool buffing wheels heavy wool felt PLUS BONUS 2 pcs 1/8" (3mm) Shank Screw Top Mandrels TOTAL OF 102 PCS.
  • Replacement Dremel polishing bits as jewelry cleaning cloth polishing cloth rotary tool jewelry making tools & accessories , 100% wool felt platinum polishing cloth, made of top quality natural wool, fits Dremel bits diamond knife polishing compound use..
  • Real Natural Wool : Use our product with a polishing compound, diamond polishing compound, in a jewelry making tool kit, marble buffing pads, mandrel jewelry making, polishing wheel brass, bronze, copper, sterling, nickel silver, gold fill, etc. almost all soft metals..
  • DRILAX Wool Felt Polishing Wheels widely used in the cylinder bore mill, pipe, grinding, mold, medical equipment, beauty equipment, gold and silver jewelry, stainless steel, glass equipment, machinery parts and other special refining process. Install on electric grinder. Suitable for wood, nuclear carving, jade, ivory, etc..
  • Natural Wool Set clock making kit, jewelry polish, jewelry tools kit, jewelry making tools kit, felt polishing pad, buffing wheel, hard felt polishing wheel, jewelr....
Check Stock