Categories

Best Chain Link Fence Tension Bar

ICITYWALL 9 Pack Chain Link Fence Extension, 25" Fence Extension Height, Galvanized Post Extender for Dogs (1-3/8")

  • Specification: 25" galvanized fence extender, 2.3" bracket , overall length 27.3". Bracket thickness: 3mm..
  • Fit 1-3/8" outer diameter chain link fence top rail. Bolts and nuts included. If parts are missing, please contact us and we will provide satisfactory after-sales service.
  • Large Opening Tube Bracket Design: Easy to push on chain link fence top rail, adjustable to extend fence at any angle. 3mm bracket thickness to ensure standing even in windy weather.
  • Made from high-quality and durable galvanized steel with rust-resistant coating to ensure long-lasting use in all types of weather.
  • Extends the height of your chain link fence, stop dogs from jumping fence, link wire or fencing material(privacy screen, sun shadow or mesh,chain link fence slats) to the posts for more uses..
Check Stock

Ridged Slats Slat Depot Single Wall Bottom Locking Privacy Slat for 3', 4', 5', 6', 7' and 8' Chain Link Fence (6ft, Black)

  • Black Ridged Slats for 6ft chain link are deliberately cut to about 68.5 inches long. These fence inserts are designed primarily for 6ft 11 or 9 gauge chain link with a two inch diamond. Also works in economy chain link with a larger diamond pattern, but privacy will be less. Slats must be installed correctly and be fully inserted inside the wire mesh of your fence to achieve the desired results. Cannot be used to extend the fence height. Not suitable for fences on a steep slope..
  • Each slat measures 1.25 inches wide. Bottom-locking Ridged Slats will provide approximately 85 percent blockage in chain link with a 2" diamond. Slats installed in chain link mesh with a 2-1/4" diamond will achieve approximately 80% coverage. Slats used in economy chain link fabric with a 2-3/8" diamond will produce about 75% privacy. Diamond size is determined by measuring diagonally between the parallel wires - NOT corner to corner..
  • Each box contains 82 “W” shaped slats and three 42-inch pieces of Viper Channel - enough to cover 10 linear feet of chain link with a 2" diamond pattern. Chain link with a larger diamond mesh pattern will use fewer slats but ALL the track provided in each box. 2-1/4" chain link will use about 77 slats per 10 feet. 2-3/8" chain link will use....
Check Stock

Auto Pool Latch 1-3/8\ X 2-1/2\ for Pool Chain Link Fence Gate

  • Galvanized Double Gate Strong Arm Residential (1-3/8" Gate Frames)For Chain link fence gates.
  • For 1-3/8" Double Chain link Fence Gate Frames.
  • Strong Arm Gate Latch is Designed for 2-4 Inch Spacing Between Gates.
  • Double Gate Latch Installs Easily on Two 1-3/8" Chain Link Gate Frames.
  • In Most Cases No Drop Rod/Pin Required on Chain Link Fence Double Gates.
Check Stock

Plum Fittings 1 3/8" Top Rail Barbed Wire Fence Extensions | Fence Extension for Dogs | Chain Link Fence Extender | Pack of 9

  • Whether you want to add height onto your chain link fence or are creating trellises for your growing grapevines, these extension arms will be the perfect, easy addition to your chain link fence.
  • Avoid the annoying and costly expense of installing a larger fence by instead adding these easy to install extensions. Simply attach the clamps to the fence top rail and secure by bolting..
  • Made from high-quality and durable galvanized pressed steel that is built to last and be rust resistant.
  • This listing is for 9 chain link fence extensions that includes all necessary bolts and nuts.
  • These extensions are designed to fit 1 3/8" outer diameter chain link fence top rail.
Check Stock

Wall Mount Gate Hinge 2 Pack Chain Link Fence Gate Hinges Fence Post Chain Link Gate Hinge with 5/8 Hinge Pin (Screws Not Included)

  • ✔Heavy-Duty: Premium fence post chain link gate hinge, made of high quality iron, silver galvanized coating, prevent red-rust, you can use them for a long time in your outdoor fence door or fence door. Patented products, please do not imitate !!.
  • ✔You will Get: 2 PACK chain link fence gate post hinge with diameter is 5/8". *(Screws not included).
  • ✔Dimension: 1.5(L)*1.6(W)*5(H), fit usual doors..
  • ✔Flat Back Wall Mount gate hinge suit barn doors, sheds, fences, screen fences, store, etc..
Check Stock

Extend-A-Post - Extensions for Chain Link Fence - Set of 9 (1-3/8")

  • Set of 9 extension posts for chain link fences sized 1 3/8".
  • Extend your existing chain link fence without removal/reinstallation of top rail.
  • Adjustable to Extend fence at any angle from vertical to 90 degrees.
  • These 1 3/8" fence extension posts help prevent pets from climbing / escaping fence.
  • Use to built cat pens / stop dogs from jumping fence key product features.
Check Stock

VegasDoggy 39' x 118' Faux Ivy Privacy Fence Screen, Artificial Hedges Peach Leaf Privacy Screen with Mesh Back for Garden, Porch, Patio, Yard, Balcony, Wall Outdoor Indoor Decor

  • ...3-Layers structure design, high-density ivy leaves, PE panel and mesh backing, provide 95% privacy, block strong sunlight, decorate your house while also protecting your privacy..
  • 【Easy Installation】- Use zip ties(not included) or rope(not included) for installation, which can be easily connected to any frame or chain link fence. The PE panel in the middle is made up of multiple pieces, which can be disassembled according to the size you need, or directly use scissors to cut the fence into the required shape and size..
  • 【Wide Applications】- It is a perfect choice for chain link fences, wire fences, metal fence welded wire meshes, privacy barriers around swimming pools, wedding walls, vinyl fences, bar wall decorations, business logo walls, restaurant wall decorations and more. Suitable for decoration on patios, balconies, yards, porches, gardens, walking paths and so on..
  • 【Size】- The size of the whole ivy fence screen is 118" x 39" (L x W), the middle panel can be disassembled into multiple pieces, and the size of each small panel is 19.3" x 9.3" (L x W).【Package Includes】- 1 x Ivy Fence + 70 x Zip Ties..
Check Stock

Nickanny's Galvanized Metal Chain Link Fence Walk Thru Gate Mounting Hardware Hanger Set, Hinges and Lockable Chainlink Gate Latch Accessories Kit for Walk-Through (Galvanized)

  • Safety and Well being are paramount to your children and your animals. With this Galvanized Chain Link Walk Gate Hardware Set you can ensure the safety and protection of your families valuables. These Do-it your Self Kits Includes All the Chain-link Parts Needed For Installation or Repair of Your Steel CL Woven Security Fence Outdoor Yard Door..
  • The set includes all the parts needed for installation. It is made of galvanized steel for durability. The long lasting pressed steel fence fittings are made to last for years along with your chain link fence system. Safe Fork Latch Includes Mountable Collar Bracket Hangers for Gates and the Lifting Fork for Your Post or Fense Pole- Backyard and Strong Driveway Hardware.
  • 2 1/2” Male Hinges with Bolts and Nuts -1 3/8" Female Hinges with Bolts and Nuts for Replacement on Fences.
  • Gates and entries to your yard are the most important to keep secure access from intruders and from the escape of your animals, dog or children. If you have a swimming pool or hot tub it is important to keep your yard secure and keep your perimeter away from liability of others on your property. Galvanized For Long Life and Durability and Safety - 180 Degree Swing Radius is Obtainable-When Locked it is Childproof (lock not included)....
Check Stock

2 Pack 1-5/8inch Chain Link Fence Frame Gate Post Hinge/Galvanized Steel Zinc Plated Pipe Gate Hinge for 1-5/8 Outside Diameter Post/Pipe, Nut/Bolt Included for Hinge

  • √.Made of Galvanized steel, rust and corrosion proof for long term product using life..
  • √.Securely connect chain link fence to a gate post..
  • √.Chain Link Fence Post Gate Hinge for outside diameter pipe or posts 1-5/8".
  • √.Fit for 5/8" Hinge Pin Hole, it’ll helpful for years of smooth gate operation..
  • √.Package includes 2* chain link fence frame hinge, nuts, bolts..
Check Stock

Jake Sales Rolling/Sliding GATE Latch: for 1-5/8\ & 1-7/8\ Chain Link Gate Frame - ROLO GATE Latch

  • ROLO latch Only fits 1-5/8" and 1-7/8" chain link Gate Frames - See Graphics.
  • Attach Latch Pin Assembly to either 1-5/8" or 1-7/8" Gate Frame with provided nuts and bolts.
  • Pin Receiver attaches to chain link Fence Post with 2 Brace Bands (sold separately).
  • Latch pin assembly will be loose on Gate Frame this is normal.
  • Choose Brace Bands based on your chain link Fence Post size.
Check Stock

SoliTube Slat Privacy Inserts for Chain-Link Fence, Double-Wall Vertical Bottom-Locking Slats with Wings for 6' Fence Height (White)

  • FENCE PRIVACY: Unlike fence tape, these slats are designed to easily slide vertically through your chain-link fence for optimal outdoor privacy. Determine the diamond size of your fence by measuring diagonally between the parallel wires, not corner to corner. The added privacy of the wings leaves no unsightly perforations or wave pattern.  Compatible with 4', 6', and 8' height fences..
  • QUALITY DESIGN: SoliTube slats are made from high-density polyethylene (HDPE), color pigments, and ultraviolet (UV) inhibitors designed to lessen the harmful effects of the sun and extend product life. The coextruded thermoplastic elastomers of the wings are soft and match the texture and sheen of the HDPE body of the slats. They are durable and resistant to severe weather conditions..
  • COVERAGE: Each slat measures approximately 1 7/16" wide with the length being approximately 3" shorter than the overall height of the fence (e.g. 6-foot slats are 69"). These vertical privacy inserts add from 90% to 100% privacy to regular 2-inch diamond, 9-gauge chain-link fabric. They also work with 11-gauge chain-link fabric..
  • WITH YOUR ORDER: Each bag contains 82 slats and covers up to 10 linear ft. Also, included in each bag are 3 Viper Channel pieces 42" in length (allowing for 10' o....
Check Stock

Sunshine&water Barbed Wire Arm Set of 10 Extend Arm Barbed Wire for 1-3/8inch Hot-Dip Galvanized Steel Cornered Barbwire Arm Barbwire Arm Extensions for Chain Link Fence All Bolts Included, Silver

  • PREMIUM MATERIAL:The barbed wire arm is made from hot-dip galvanized steel, durable and rust-assistant, and can be used for a long time. It is designed to fit a 1-3/8" chain link fence, and bolts are included when you buy our barbed arm..
  • EASY TO INSTALL: Don't worry about your inability to install and the complicated installation process. The security fence barbed wire is easy to install by simply placing it on the fence that needs to be increased in height and tightening the screws..
  • PREVENT POULTRY FROM CLIMBING: If you are in trouble that your dog, chicken, or other poultry want to climb the fence, and you don't want to disassemble the whole fence, then there are ten barbed wire arms do not include the bolts , you can put them on the poultry fence to prevent the poultry from climbing..
  • WIDE APPLICATIONS:The chain-link fence arm can be used in different places, Whether you want to add height onto your chain link fence, prevent your dog from jumping out, or are creating trellises for your growing grapevines, these extension arms will be the perfect addition..
Check Stock

ZENTOP Chainsaw Chain 18-Inch 3 Pack .325″ Pitch .063″ Gauge 68 Drive Links Wood Cutting Saw Chain for Chainsaw Parts fits Craftsman, Echo, Homelite, Poulan, Remington

  • ♧ Size: 18″, Pitch: .325″, Gauge: .063″, Drive Link Count: 68..
  • ♧ Chrome-Plated Cutters: Saw chain electroplates a layer of industrial hard chrome to all our saw chain cutters. Chrome delivers a harder surface and better wear resistance. The saw chain has chromed cutters for fast, smooth cutting and design for safety and durability..
  • ♧ Hardened Rivets: For a longer working saw chain, chainsaw induction hardens and quenches all saw chain rivets, delivering a high-quality, load-bearing surface that resists wear and improves strength. Less wear and chain stretch means fewer chain tension adjustments..
  • ♧ Advanced design: Reduced vibration levels for consistent cuts and greater user comfort. so we created a small space between the saw chain and the guide bar. A lot of the energy gets dissipated by the saw chain, acting as a shock absorber. It never reaches the guide bar, the saw – or most important – the operator. Our low vibration design reduces vibrations by 20% or more..
  • ♧ Please Note: The same saw can have different bar lengths so ensure you confirm the pitch, gauge, & drive links on your current bar. Not all bars take the same amount of links..
Check Stock