Categories

Best Chair Foot Glides

1.5\ Patio Furniture Glides - 36 Pack Wrought Iron Chair Table Legs Feet Caps Outdoor Floor Protectors Replacement Parts for Protect Your Floor Surfaces from Scratches and Rust Easy to Install (Black)

  • ...6 pieces is enough to replace the aging chair leg protectors of 9 chairs. This sliders for chairs has a 1.7" outer diameter (1.4" inner diameter). Perfect for a variety of wrought iron chairs or table legs with an internal diameter of 1.5"..
  • ☛【Durable Material】Our outdoor wrought iron chair leg protection glides are made of thicker, more durable high-quality plastic that lasts longer. They're strong enough to withstand the heat and sun in summer, and the cold in winter, to work for you in any weather, and you won't have to worry about them warping or rusting..
  • ☛【Protect Patio Floors】 Our wrought iron furniture feet caps have a smooth surface and rounded shape. They are great for protecting your patio floors from scratches or rust from wrought iron furniture legs. The chair and floor can be well protected..
  • ☛【So Easy to Install】 Soak in hot water for a few minutes before installation, this makes installation easier. 1. Use a screwdriver or pliers to remove the old sliders for wrought iron chairs. 2. Use a knife to remove dirt and other residues from the inside of the chair legs. 3. Fix the chair glide with your fingers so that it is in the middle of the chair foot and keeps it level. 4. Tap the periphery of the floor glide protecto....
Check Stock

profectlen 2 Inch Chair Universal Wheel Taipan Swivel Chair Wheel Office Chair Computer Chair Pulley Pu Furniture Casters

  • Overall glide height: 2 inches overall glide height when installed, fits for most small chair casters.
  • This stool office chair bell glides can convert office chair with casters into a stationary chair without losing the chair height.
  • Dimension of insert stem: the standard 7/16 x 7/8 inch (11 x 22 mm) grip ring mounting stem to attach to most standard chair or stool bases, Suitable size can meet your needs.
  • Please refer to the size carefully before purchase to confirm the proper purchase.
  • Bell glides size: these bell glides are 2 inch in bottom width and 2 inch overall glide height, similar to most small chair casters.
  • The weight of each glide is 110 lbs, 5 pieces glides support 550 lbs in total.
  • Practical design: with solid nylon structural glides design, can handle more weight on most of desk chairs, workshop chairs or any other stools, etc., black color also can easy to match different chairs.
  • Protect your floor: the bell glides replacement has hard plastic bottom with felt pads can protect your soft floor better.
Check Stock

Square Furniture Sliders for Carpet and Hardwood Floors, Large Chair Sliders for Carpeted Floors, 16PCS Fit 1.6"-2" Super Sliders Teflon Chair Glides, Clear Chair Leg Floor Protectors, Anti-Scratch

  • ...and not easy to fall off.Can be applied to round, square, and other irregular chair feet. Extra large Size fit furniture leg diameter 1.6" to 2". Pls, Measure your furniture leg size carefully before ordering..
  • 【PREVENT SCRATCHES & REDUCE NOISE & EASILY GLIDES】Our magic sliders are upgraded and thickened, it has excellent high tensile strength TPE sleeve, durability, aging resistance, bottom made of ultra-smooth PTFE(Teflon) material, reduce resistance Make everything slide and move so much easier on the carpet. Chair leg sliders for carpet can protect furniture feet, Hardwood tile wooden floors from scratches, reduce noise, and prevent bumps. Your floors stay looking beautiful!.
  • 【Upgraded Materials Not fall off】Our upgraded chair glides for carpet mold the PTFE and the silicone into one inseparable piece, prevents from falling off during use. Compared with the 0.05" thick ​on the market, the inner wall of our chair pads was thickened to 0.1", durable and never tear. You don't worry about cleaning and damaging furniture feet. The adhesion of the gel is not strong enough, easy to fall off and leave residual glue on the carpe....
Check Stock

Safco Master High-Back Economy Industrial Workbench Swivel Task Chair, Black

  • INDUSTRIAL WORKBENCH: The Task Master industrial workbench swivel task chair is ideal for your home office, studio room, workshop, etc..
  • COMFORTABLE SEAT: The self-skinning polyurethane foam seat and back with 2" seat cushion keeps your back and kneck in a comfortable position as you work throughout the day..
  • ADJUSTABLE SEAT: Adjust the seat to your perfect height level by using the pneumatic seat height adjustment 17" to 35"H. Use the ergo knob to adjust the back height. This chair offers 360 degree swivel to give you a full range of motion at work..
  • FOOT REST: The workbench has 3 unique levels of footrests to help relax your leg muscles.The 5-leg tubular stell 26" dia base with high-impact nylon glides keeps you balanced and focused in your work environment..
  • OPTIONAL CARPET CASTERS: Safco Products optional carpet casters 5131 and Inserts 5130, hard floor casters 5132, Glides 5138 and Closed Loop 5143 or T-Pad 5144 Armrests, sold separately.
Check Stock

Bell Glides Replacement Office Chair Wheels Stopper Office Chair Swivel Caster Wheels, 2 Inch High Profile Stool Bell Glides with Separate Self Adhesive Felt Pads, 5 Pieces (Black)

  • Overall glide height: 2 inches overall glide height when installed, fits for most small chair casters.
  • This stool office chair bell glides can convert office chair with casters into a stationary chair without losing the chair height.
  • Dimension of insert stem: the standard 7/16 x 7/8 inch (11 x 22 mm) grip ring mounting stem to attach to most standard chair or stool bases, Suitable size can meet your needs.
  • Please refer to the size carefully before purchase to confirm the proper purchase.
  • Bell glides size: these bell glides are 2 inch in bottom width and 2 inch overall glide height, similar to most small chair casters.
  • The weight of each glide is 110 lbs, 5 pieces glides support 550 lbs in total.
  • Practical design: with solid nylon structural glides design, can handle more weight on most of desk chairs, workshop chairs or any other stools, etc., black color also can easy to match different chairs.
  • Protect your floor: the bell glides replacement has hard plastic bottom with felt pads can protect your soft floor better.
Check Stock

Felt Chair Leg Floor Protectors for Hardwood Floors, 8PCS Rectangle Furniture Pads Easy Glides for Bar Stools, Clear Silicone Chair Leg Caps to Protect Floors, Fit Length 1.3"-1.65", Width 0.87"-1.18"

  • ...-30mm) chair foot, Never worry about the felt pads falling off. Felt furniture pads are wear-resistant, soft, and extremely flexible..
  • EASY TO SLIDE: Our leg covers for chairs with felt pads make them easy to slide on wooden floors without damaging the floor. Perfect chair glides for wood floors. Help easily smooth move for furniture with rectangle leg..
  • PROTECT FLOORS & REDUCE NOISE: Perfect chair foot covers felt floor protectors for hardwood floors, wood floors, tile, concrete, laminate floor and vinyl. Felt chair bottom floor protectors avoid scratch and damage your floors, reduce unwanted noise..
  • EASY TO USE: These chair felt pads are easy to install, just clean up the furniture leg, and spread the highly elastic chair covers top to lock the furniture leg, then finish installation, never worried fall off..
  • WIDELY APPLICABLE: Chair leg floor protectors rectangular widely applicable for rectangular bar stools, barstools, kitchen chairs, kitchen dining stools, patio chairs, bed frames, sofas, cabinets, metal deck furniture, etc.
Check Stock

32 Pack of 1.5” Patio Furniture Glides/Feet/Caps for Wrought Iron Outdoor Furniture – Protect Your Floor Surfaces from Scratches, Replacement for Eight Chairs (with 4 Legs), Easy to Install Impresa

  • Easy To Install: Our wrought iron chair glides have a diameter of 1.5” and are designed to fit most pieces of common patio furniture. They are easily installed using a rubber hammer or mallet. No adhesives required..
  • Keeps Floors Protected: These wrought iron chair glides help to provide the much-needed cushion to protect your floors from permanent damage. Say goodbye to nasty scratches on your patio floors. These chair glides help to prevent moisture build-up that may cause rust on your wrought iron tables or chairs..
  • Excellent Value: Our 32 pack of patio chair glides is enough for 8 chairs (with 4 legs each). These durable leg cushions are designed to last for seasons to come..
  • Will it Fit? These are not adjustable and are not a universal fit. Designed with weep holes to fit inside the chair leg of most standard sized patio chairs and stools that require a 1.5 inch in diameter cap. Please measure the diameter of the wrought iron cup area where the glide will be installed (see infographic in images). Please reach out to us through our seller page with any questions..
  • Made To Last: Our wrought iron furniture glides are made with UV resistant outdoor-ready plastic and designed to endure whatever weather may come. Spend less time replacing your chai....
Check Stock

Wrought Iron Patio Furniture Legs Caps 1-1/2 56 Packs Floor Protectors Plastic Round Inserts Feet Caps for Outdoor Metal Chair and Table Glides

  • Say goodbye to nasty scratches on your patio floors.These wrought iron chair glides help to protect your floors from permanent damage.
  • Our wrought iron chair glides have a diameter of 1.5” and they are easily installed using a rubber hammer or mallet..
  • Fits most standard sized patio chairs that require a 1.5 inch in diameter cap. Please measure the diameter of the wrought iron cup area where the....
  • Our 56 pack of patio chair glides is enough for 14 chairs (with 4 legs each)..
  • Spend less time replacing your chair glides and enjoy more time relaxing..
Check Stock

GorillaFelt Swivel Glide Felt Sliders for Chairs (16 Pack) Screw-On Floor Protectors for Angled Furniture Legs, 1 Inch Round Felt Glides, CB259-16

  • SWIVEL ACTION FOR ANGLED LEGS – Plastic ball and swivel socket felt glides designed for slanted or angled furniture legs that are ¾” to 1-1/2 inches in diameter at base (can also be used on straight chair legs).
  • LONG LASTING WOOL BLENDED FELT– Each GorillaFelt foot features a durable ¼” thick premium wool blended felt base that lasts longer, provides super smooth and quiet chair sliding, and protects all hard floor surfaces from furniture damage.
  • PREMIUM FEET FOR CHAIRS & STOOLS – Ideal floor protectors for dining chairs, bar stools, kitchen chairs, tables, and wooden furniture legs.
  • levels chairs and furniture to be flat on floor.
  • SAFE ON ALL HARD FLOOR SURFACES – Prevents furniture from damaging floor surfaces and safely protects all hard surfaces including hardwood, tile, vinyl, laminate, LVT, marble, and more.
  • INCLUDES 16 SWIVEL SLIDERS & SCREWS - Includes 16 screw on felt swivel feet that are 1 inch round and add ¾ inch height to furniture and 16 x 1-inch screws for secure attachment under chair foot.
Check Stock

Cyful 50pcs Round Plastic Plugs 1-1/4 inches OD, Tubing End Cap Insert Glide End Cap Pad Black for Chair Table Stool Leg, Pipe,Tubing

  • 【Package】50 x Round Black Plastic Tubing Plugs.
  • 【Size】Overall (Approx.): 32 x 16mm/1-1/4″ x 0.63″(OD*H).
  • 【Functions】Round Plastic Plug with the plastic cover coated around the table and chair foot, the floor gets less scratches and noises..
  • 【Material】Tubing End Cap made of black plastic with ribs to secure. It can protect your patio surface, patio chair feet and patio legs from damage..
  • 【Usage】Chair Legs Covers Protector is perfect for office/patio furniture, chair glides, wrought iron, appliances, exercise equipment, or anywhere a clean finished look is desired..
Check Stock

uxcell Plastic Plug End Caps 30mm x 15mm Rectangular Furniture Table Chair Legs 30Pcs

  • [INSERT SIZE] - Fits Inside Hole Size: 29 x 14mm / 1.14-inch x 0.55-inch (L*W).
  • [OUTSIDE SIZE] - Plastic end caps for 30mm x 15mm outside size rectangular end (confirm you are measuring the outside, not the hole).
  • [PACKAGE CONTENT] - 30 pieces Plastic Plug End Cap.
  • [FUNCTIONS] - Plastics black plugs work great for preventing scuffs on wood floor or as protection glides.
  • [APPLICATIONS] - Ideal for chair tips, bench feet, table legs, bar stool foot sliders, patio furniture inserts, chair leg protectors, etc..
Check Stock

Mastery Mart Office Chair Base Replacement for Desk Chair with Cap, Universal Gas Cylinder and Caster Sockets, 28\(70 cm) Heavy Duty 2200 Lbs/1000 Kg (Matte Black)

  • Standard 7/16" x 7/8" (11mm x 22mm) grip ring mounting stem to attach to most standard chair or stool bases - Not fit for Ikea chairs. Ikea chair needs 10mm Stem, but this is 11mm.
  • Each caster wheels features a grip ring stem, which enables them to be attached to the base of an office chair without the use of any tools.
  • This Stool or office chair bell glides to convert any office or desk chair in stationary. This stool office chair bell glides can convert office chair with casters into a stationary chair without losing the chair height.
  • Heavy duty weight rated 150 lbs. per glide as a set of 5 supports 750 lbs.
  • These glides remain stable across smooth floor surfaces such as wood, tile and laminate while providing more traction than caster wheels do.Provides a safer seat for those who have difficulty getting in.
Check Stock

Project Patio 1-1/2 Inch Deluxe Round Glide Insert Cup End Cap for Wrought Iron Patio Furniture Chairs and Tables 24-Pack (White)

  • HEAVY DUTY non-scratching replacement outdoor chair and table foot caps are thicker and easier to install versus the non deluxe standard version. Perfect alternative to the Forever Glides.
  • PROTECTS your patio surface, patio chair feet and patio legs from damage..
  • PROVIDES smoother movement of furniture. Patio chair slides over the floor.
  • 1-1/2″ PATIO CHAIR GLIDE installs INSIDE the metal cup on the bottom of the chair or table feet of wrought iron patio furniture with a inside diameter of 1-1/2″ Make sure you measure the inner diameter of the wrought iron cup area where the glide will be installed. The most common size is 1.5″ inches.
  • PACKAGE INCLUDES 24 furniture cap replacement pieces. The Project Patio brand is sold exclusively by Jekm Brands Inc. BEWARE of imitations of lesser quality from other suppliers. We offer a 30 day 100% satisfaction guarantee or your full money back.
Check Stock