Best Chamfering Bits
OCGIG 4pcs Titanium Coated Countersink Chamfer Tool Deburring Tool Set Metal Wood Drill Bits Zhongbo Business
- Material:HSS(High Speed Steel)4241, Titanium Coated.
- Application:Ideal for cutting through metal,wood,plastic and thin iron plate (hardness .
- Chamfer range:2-5mm, 5-10mm, 10-15mm, 15-20mm, Shank diameter: 6mm, 8mm, 10mm, 12mm, Head diameter: 10mm, 14mm, 21mm, 28mm.
- 90 Degree angle on the point for sharp and precise countersinking, used for workpiece circular aperture chamfering or cone hole.
- This bits should use the bench drill , it is easy to shake and it will affect the chamfering effect if you use the hand drill.
Check StockRIMKOLO 92-Piece Bit Socket Set,1/4',3/8'and 1/2' Drive Torx/Tamper Proof Torx/Hex SAE & Metric Bit Set,S2 Steel Bits
- 【DURABLE S2 Material】: The bit socket is made of S2 alloy steel, which is strong and has good toughness, not easy to break.The chamfering design of the head increases the contact area, not easy to wear,more durable..
- 【MIRROR POLISH】: Mirror chrome plated surface anti-rust and anti-corrosion. Extend service life..
- 【CHAMFERING DESIGN】: Each bits head has a unique chamfering design, which makes it easier to insert the bit head into the fastener. And increase the contact area with the fastener, reduce wear, protect the fastener.Complies with ANSI standards..
- 【Organizer Box】: The wrench set is equipped with a tool box for easy organization and storage,and easy to carry. Each wrench size is printed on the tool box for easy sorting..
- 【COMPLETE ACCESSORIES】: 92PCS high quality bit socket set,including 1/4", 3/8" and 1/2"drive Torx / E-Torx / tamper proof Torx / Torx Plus / hex SAE & metric bit set. Complete accessories to meet your needs..
Check StockSpetool 90 Degree Carbide V Bits with Tiain Coated 4 Flutes Chamfer End Mill for Caving V Groove and Sign
- Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length..
- The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
- 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
- Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
- V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check StockSpeTool Carbide Chamfer End Mill V Groove Router Bit 60 Degree, 4 Flutes 1/4 inch Shank for CNC Carving and Chamfering
- Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length..
- The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
- 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
- Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
- V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check StockKlein Tools 32793 Pro Impact Driver Bit, 5/16-Inch Hex Nut Driver, 3 Pack
- Longer pro impact power bits are designed to reach easily into boxes and panels.
- Hex pockets have minimal chamfering increasing surface contact between the nut and driver.
- Bits are color coded with the ASME standard for easy identification.
- Can be found along other sizes and tips in the Pro Impact Power Bit Set (Cat. No. 32799).
Check StockFestool 769093 Drill bit DB Wood CE Set TL 6X
- ★【Moce Rotary Burr Bit Set】6mm shank moce rotary burr bits are made of high quality carbon steel,sharp and stable,including sphere,round,short hair,big cone and small cone..
- ★【Easy to use】Safe and reliable, reducing labor intensity and improving the working environment..
- ★【Main function】Can be used for engraved designs, chamfering, hollow out, grooving, reaming, etc..
- ★【Available for】The Moce Rotary Burr Bits are available for handling wood, non-ferrous metals, plastics and rubber..
- ★【Buy with Confidence】We offer "TWO YEAR" warranty on item(s) that confirm to be manufacturer defect.We'll respond within 24 hours on weekdays.(Please clamp the shaft in right place and necessary protective measures in woodworking processing.).
Check StockWoodworking Chamfer Drilling Tool Step Countersink Drill Bit Set for for Glass Metal 9PCS Drill
- The Chamfer Drilling Tool is made of high-speed steel, titanium-plated, practical and durable.
- There are 3 step drill bits and 6 Countersink drill bits in the package.
- Countersunk bit set is suitable for quick change, suitable for most power tools with 0.64 cm hex shank.
- Countersink Drill Bit Set is suitable for chamfering various materials, such as wood, plywood, aluminum, iron, copper, fiberboard, particleboard, plastic, PVC board, etc..
- Automatic manual Chamfer Drilling tool with spring load mechanism, suitable for wood, metal and other materials.
Check StockQualtech 25/32\ HSS 2MT Taper Shank Drill Bit, DWDTS25/32
- Durable Material: This M6 taper drill with high hardness, anti‑rust, strong and durable for a long term use..
- Self‑centering Design: This hex handle tap drill bits has self‑centering point, no need for auxiliary center drilling or center punching..
- Save Time: This taper drill can drilling chamfering and tapping at the same time, one‑step processing, greatly saves processing steps and time costs, and improves work efficiency..
- Widely Application: This hexagonal handle compound tap drill bits is suitable for drilling, tapping and cutting of soft metals, aluminum plates, iron, etc..
- Accurate: This hex shank drill with accurate ground point, flutes, body, clearance, and drill diameters for the best accuracy and performance..
Check Stock10PC Double Cut Carbide Burr Set 0.118\ (3mm) Shank, Rotary Tool Bits Cutting Burrs - Dremel Accessories Fordom, Flex Shaft, Dewalt and Die Grinders - Wood Carving bits Metal Working and Engraving
- 【✺PREMIUM MATERIAL】Dremel carving bits Made from High-quality Tungsten Carbide, sturdy and durable. Used on wood, iron, carbon steel, alloy steel, stainless steel, copper, aluminum, and other metals, and marble, jade, bone etc..
- 【✺PERCISION AND EFFICIENCY】The surface of dremel carving bits is smooth after carving by die grinder bits, and no dust and pollution created. In particular, Dremel carving bits have 3mm for detailed work and 6mm for quick material moving.its efficiency is higher than the manual file tool, and the special design multi slotted burrs improve the working efficiency greatly..
- 【✺TUNGSTEN = DURABILITY】Dremel Carving Bits are easy to use, safe and reliable. Its durability is much higher than high-speed steel tools and more than 200 times higher than the small grinding wheels ..
- 【✺ADAPTABILITY】: All dremel bits with 1/8" shank-compatible with Dremel or most rotary tools, accurate centering. Twenty kinds of size for woodworking, carving, engraving, and polishing, chamfering, grooving, reaming, hollow, beveling..
- 【✺CONVENIENT PACKAGING】 20pcs die grinder bits are packaged in a small plastic case with separated slot, no need to organize always keep neat..
Check StockMIXPOWER 9 Pieces 1/4\ Drive Torx Bit Socket Set, Tamper-Proof Torx Bit Sockets, CR-V Sockets & S2 Steel Bits, TT10 - TT50
- 【Premium Material】The sockets are made from heat treated chrome vanadium steel and the bits are made from S2 steel, which for strength and durability..
- 【Set Includes】9 Pieces 1/4"Dr. torx bit socket set: TT10, TT15, TT20, TT25, TT27, TT30, TT40, TT45, TT50. With a durable socket holder rail for easy storage..
- 【Chamfering Design】The unique chamfering design makes the bit head insert into the fastener easier and reduces wear..
- 【Laser Marking 】High-contrast size marking is permanently laser etched for easy identification even in low light..
- 【Service Guarantee】All MIXPOWER Tools meet or exceed ANSI performance standards. It comes with 1 year quality guarantee..
Check StockMIXPOWER 107 Piece 1/4 Inch, 3/8 Inch & 1/2 Inch Drive Bit Socket Set, Torx/Extra Long Torx/Tamper Proof Torx/Hex/Ball End Hex, SAE & Metric Bit Set,S2 Steel Bits
- 【 S2 alloy steel bit 】Combination of premium S2 alloy steel bit and chrome vanadium steel socket for superior hardness that reduce wear-outs and ensure longevity for lasting service life..
- 【CHAMFERING DESIGN】: Each bits head has a unique chamfering design, which makes it easier to insert the bit head into the fastener. And increase the contact area with the fastener, reduce wear, protect the fastener.
- 【COMPLETE ACCESSORIES】: 107PCS high quality bit socket set,including 1/4.
Check StockMIXPOWER XZN Triple Square Spline Bit Socket Set, Tamper Proof, 1/2\ 3/8\ 1/4\ Drive, M4 - M18, S2 Steel, Cr-V Sockets and S2 Steel Bits, 10 Pieces Set
- 【 S2 alloy steel bit 】Combination of premium S2 alloy steel bit for superior hardness that reduce wear-outs and ensure longevity for lasting service life..
- 【Premium Materials】Made from premium chrome vanadium steel with mirror finish, provides the greater strength and torque..
- 【CHAMFERING DESIGN】Each bits head has a unique chamfering design, which makes it easier to insert the bit head into the fastener. And increase the contact area with the fastener, reduce wear, protect the fastener..
- 【Set Include】10 Pieces: 1/4" Dr.: M4, M5, M6, 3/8" Dr.: M8, M9, M10, M12, M14 (tamper-proof), 1/2" Dr: M16(tamper-proof), M18 (tamper-proof)..
- 【Service Guarantee】All MIXPOWER Tools meet or exceed ANSI performance standards. It comes with 1 year quality guarantee..
Check StockJERRAY Chamfering Mill Carbide with TiAlN Coated 4 Flutes 90 Degree V-Groove Chamfer End 1/4 Diameter
- Type: Chamfering router bits / Brand Name: JERRAY Tools.
Check Stock