Categories

Best Chamfering Cutters

PORTER-CABLE Hand Planer, 6-Amp, 5/64-Inch (PC60THP)

  • Heavy-duty 6 amp motor of the electric hand planner provides smooth cutting in hard materials.
  • The hand planer has 16,500 rpm for smooth material removal.
  • Dual side dust extraction allows for extraction on either side of the tool.
  • Overmold depth knob with 10 positive steps allows for better planer control and multiple depth control settings.
  • 3 chamfering grooves allow for options for edge chamfering.
  • 11.5-inch cast aluminum shoe provides added control and better finish quality.
  • 5/64-inch depth of cut removes excess material in less time.
  • Overmold depth knob with 10 positive steps.
Check Stock

Carbide Chamfer Cutter, End Mills Tungsten Steel 3 Flute Chamfer End Mill 90° for Carving for Chamfering(D4*90°*50L)

  • The chamfering tool has standard size and can be used as an aluminumcopper milling cutter tool and an engraving milling cutter head..
  • The professional chamfer design can polish and engrave the workpiece without unloading..
  • The unique one-piece design makes the debris generated during the cutting process easier to fall without clogging the tool..
  • The chamfering tool is mainly used for 90° chamfering or taper hole processing on the workpiece..
  • The chamfering is designed with 3 flutes, which can complete the operation of conical surface at one time, and is suitable for small cutting amount..
Check Stock

Frifreego 5-in-1 Paper Trimmer A4 Paper Cutter Portable Craft Cutter with Blades of Straight,Wave,Dotted,Creasing and Fillet Charmer, for Cutting Paper,Photos,Postcards,Business Card,Documents

  • 5-in-1 MULTI-FUNCTION- Unlike most paper cutters on the market, which can only cut straight lines, our paper cutters contain 5 kinds of blades, including cutting straight lines, wavy lines, dashed lines, corner chamfering and even simple creasing!.
  • SUITABLE FOR PEOPLE OF ALL AGES- The blades of this rotary paper cutter is fully closed and can be switched with rotation, making it possible to easily replace the blades without touching the blades, avoiding unnecessary finger injuries. The paper cutting device is simple and safe enough, even if it is used by young children!.
  • STRONG PROCESSING ABILITY- Just 1 paper trimmer can meet most of your needs, whether it is for office use or home handwork! Photos, Papers, documents, business cards, postcards even handcrafts, coupon, all of these can be processed by the our sliding paper cutter. The surface has clear rulers, plus transparent pressboard, to make cutting more accurate, convenient and fast..
  • ABOUT CUTTING THICKNESS- Different blades has different cutting abilities-- Blade of straight line: 5 sheets.
  • fillet charmer: 3 sheets. So the paper cutter especially suitable for a small mount of cutting duty..
Check Stock

KOPO KP-5702 Manual Chamfering Machine Mini Portable Linear Pneumatic Tool Hand-Held 45 Degree Light Weight Elbow

  • This 45-degree chamfering machine has a new lightweight design, small and exquisite, and can be easily operated with one hand. Use the matching wrench to easily adjust the chamfer size and replace the blade..
  • Pneumatic chamfering machine is made of high-quality imported accessories, chamfering Machine keeps accuracy assembly with stable performance for long life..
  • It can withstand high impact and high speed, with little vibration, low resistance and lower loss. The speed is increased and the chamfer is smoother, and the machine is more durable..
  • Equipped with a 360-degree rotating exhaust port, which can quickly exhaust and reduce the temperature of the machine..
  • Pneumatic chamfering machine is entitled with high performance according to strict rule, such a power tool is made via accuracy craft by many experts..
Check Stock

Fafeicy Carbide Chamfer End Mill, 3 Flute 60° Milling Cutter V Groove Router Bit Tungsten Steel CNC Carving Polishing Router Bit, for Plywood, Soft Wood(D4*60°*50L), Milling Cutter

  • The chamfering mill is mainly used for the 60 ° chamfer or conical hole of the workpiece, and the edges and angles of each surface are champened..
  • This hard alloy chamfered milling cutter unique single-piece design makes debris generated during the cutting process without clogging the tool..
  • The chamfering cutter is of standard size and can be used as aluminum-copper milling tool and engraving milling cutter bit..
  • This hard alloy chamfering cutter uses 3 flute design to complete the processing of tapered surfaces at a time, suitable for small cutting processing..
  • This chamfering cutter has a wide range of applications, suitable for hardwood, plywood, cork, oak, MDF and metal in HRC 55..
Check Stock

Chamfer End Mill 3 Flute Chamfering Router Bit 90° Tungsten Steel CNC Polishing Carving Tool for Small Cutting Amount(D3*90°*50L)

  • 3 FLUTES: The chamfering knife is designed with 3 flutes, which can complete the operation of conical surface at one time, and is suitable for small cutting amount..
  • ONE-PIECE DESIGN: The unique one-piece design makes the debris generated during the cutting process easier to fall without clogging the tool..
  • EASY TO USE: The milling cutter bit dopts professional chamfer design, which can polish and engrave the workpiece without unloading..
  • STANDARD SIZE: The end mill chamfer bit has standard size and can be used as an aluminum‑copper milling cutter tool and an engraving milling cutter head..
  • APPLICATION: The chamfering tool is compact design, easy to carry and store, mainly used for 90° chamfering or taper hole processing on the workpiece..
Check Stock

RIMKOLO 107-Piece Bit Socket Set,1/4

  • DURABLE S2 Material: The bit socket is made of S2 alloy steel, which is strong and has good toughness, not easy to break.The chamfering design of the head increases the contact area, not easy to wear,more durable..
  • HEAT TREATMENT CR-V: The socket base is made of chrome vanadium steel with stronger hardness after heat treated and provides higher torque.The surface is mirror chrome plated,and the E-Torx Sockets with manganese phosphate coating are more anti-corrosive and anti-rust than Black oxide coating, extending the service life..
  • CHAMFERING DESIGN: Each bits head has a unique chamfering design, which makes it easier to insert the bit head into the fastener. And increase the contact area with the fastener, reduce wear, protect the fastener.Complies with ANSI standards..
  • COMPLETE ACCESSORIES: 107PCS high quality bit socket set,including 1/4", 3/8" and 1/2"drive Torx / extra long Torx / tamper proof Torx/hex / ball end hex SAE & metric bit set. Complete accessories to meet your needs..
  • EASY TO IDENTIFYWith a storage toolbox, easy to carry. Specifications are clearly printed on the tool box and socket, which is convenient for identification and sorting, saving you time..
Check Stock

Pipe and Tubing Inner-Outer Reamer 5/16-Inch to 2-1/8-Inch Diameter Stainless Steel/PVC Pipe Chamfer Anti-Slip Aluminum Alloy Shell Deburring Tool

  • STAINLESS STEEL TUBE REAMER: trimming, chamfering and deburring the outer wall.
  • trimming, chamfering and deburring the inner wall. At the same time, the outer wall is made of aluminum alloy with anti-skid pattern..
  • APPLICABLE OBJECTS: refrigeration copper pipes, stainless steel pipes, plumbing bellows, gasoline pipelines (aluminum pipes), galvanized pipes for water engineering, etc..
  • INNER/OUTER BLADE: Multi-blade alloy steel core design, triangular scraper-the triangular support of the blade is more powerful, convenient and fast..
  • MACHINABLE RANGE: 8-54mm (5/16"-2 1/8") inner diameter/outer diameter can be used, most household pipe diameters are covered, a reamer can solve all deburring and chamfering..
  • USAGE: Rotate and cut directly by hand, or use an electric drill with an adapter for processing..
Check Stock

38 Piece 5/16 Premium C6 Carbide Tipped Lathe Tool BIT Set BRAZED Single Point

  • 5/16" Premium C-6 carbide tips designed for long tool life in steel, alloys, etc..
  • 8 Pcs Style AR & AL- For general machining applications, turning, facing, boring and chamfering.
  • 6 Pcs Style E- 30-degree Lead angle for threading, chamfering, V-grooving, turning, facing & boring.
Check Stock

RIMKOLO 92-Piece Bit Socket Set,1/4',3/8'and 1/2' Drive Torx/Tamper Proof Torx/Hex SAE & Metric Bit Set,S2 Steel Bits

  • 【DURABLE S2 Material】: The bit socket is made of S2 alloy steel, which is strong and has good toughness, not easy to break.The chamfering design of the head increases the contact area, not easy to wear,more durable..
  • 【MIRROR POLISH】: Mirror chrome plated surface anti-rust and anti-corrosion. Extend service life..
  • 【CHAMFERING DESIGN】: Each bits head has a unique chamfering design, which makes it easier to insert the bit head into the fastener. And increase the contact area with the fastener, reduce wear, protect the fastener.Complies with ANSI standards..
  • 【Organizer Box】: The wrench set is equipped with a tool box for easy organization and storage，and easy to carry. Each wrench size is printed on the tool box for easy sorting..
  • 【COMPLETE ACCESSORIES】: 92PCS high quality bit socket set,including 1/4", 3/8" and 1/2"drive Torx / E-Torx / tamper proof Torx / Torx Plus / hex SAE & metric bit set. Complete accessories to meet your needs..
Check Stock

2 Flute Convenient 90° Chamfer End Mill Durable for Machine Tools for Chamfering(8 * 60L)

  • Made of tungsten steel cemented carbide material, high hardness and long service life.
  • This is 90 degrees 2 flutes chamfer end mill, precise and durable.
  • Suitable for machine tools, milling machines..
  • It is not only suitable for chamfering of ordinary machined parts, but also suitable for chamfering and deburring of accuracy difficult-to-chamfered parts..
Check Stock

90° Chamfer End Mill 2 Flute Tungsten Steel Cemented Carbide Precise for Machine Tools(1075L)

  • Suitable for machine tools, milling machines..
  • This is 90 degrees 2 flutes chamfer end mill, precise and durable.
  • It is not only suitable for chamfering of ordinary machined parts, but also suitable for chamfering and deburring of accuracy difficult-to-chamfered parts..
  • Made of tungsten steel cemented carbide material, high hardness and long service life.
Check Stock

OCGIG 4pcs Countersink Chamfer Tool HSS 4241 Deburring Tool Set Metal Wood Drill Bits

  • Shank type: round, Sizes: 2-5mm,5-10mm, 10-15 mm, 15-20mm.
  • Ideal for cutting through metal, wood and plastic (hardness .
  • 90° angle on the point for sharp and precise countersinking, used for workpiece circular aperture chamfering or cone hole.
  • This bits should use the bench drill , it is easy to shake and it will affect the chamfering effect if you use the hand drill.
Check Stock