Categories

Best Charging Port Interface Board Replacements

Mobile Phone Repair Parts Charging Port Board for Meitu M260

  • New mobile phone repair replacement parts..
  • High-quality connector charging port, all parts are tested..
  • Before purchasing this product, please check the model of the device..
Check Stock

Chromebook Freestyle [Explicit]

  • This product is a Type-C multifunction converter that supports charging, data transfer and MODE to an HDMI display, and can also connect standard USB devices and Type-C charging cable..
  • Input (USB-C charging port): 1 port 5-20V/3A Max (beside the HDMI port).
  • Interface: 1 * HDMI, 1 * USB 3.1 output , 1 * Type-C female charging port . with data transferring and charging function ,or OTG function. you can use it Directly . no need for drive ..
  • Application: For Nintendo Switch, for type-c devices, such as for macbook,Microsoft:Lumia 950 950XL Huawei:MateBook Xiaomi Air Book LG:G5 Lenovo:YOGA 900S 910 910S(2 usb c input port hub dont compatible) for xiaomi type-c laptop,Samsung:Galaxy S8 S8 Plus , etc.
  • if there is any quality problem . please send us a email.we will give you full refund or resend you a new one for free immediately . Your absolute satisfaction is our unremitting pursuit..
Check Stock

ISDT P10 LiPo Battery Balance Charger Duo 250WX2 400W Dual Channel Output 1-6S Li-ion Life NiCd NiMH LiHV PB Smart Battery (Power Supply is NOT Included)

  • [High Power Synchronous Dual Channel,with Smart Charging]-Smart High Speed Processor delivers parameter interfere to each port.Hassle Free with Maximum charging power up to 250W for single port..
  • [Synchronous Parallel charging]-Built-in High Speed Processor Synchronous Balance two channel charging.Maximum Parallel Charging power up to 400W.P10 deliver charging current range from 10A ~ 16A..
  • [Support USB interface to upgrade firmware]-Connecting the computer through the USB-C interface, upgrade to the latest firmware.Always maintain the advanced performance and features..
  • [Adjustable Digital Power Supply]-The CH1 of the charger can become a DC power supply.In adjustable digital power supply mode,the Max. power is 120W.CC: 0.2~5A,CV: 5~24V..
  • [Lights off in the dark,introducing the dark mode]-scOS 2.0 new dark mode feature,Suitable for low light scenario,System will adjust the interface in dark tone,Reduce light damage to user’s eyes.While remaining the iconic and comfortable charging display style..
Check Stock

Dual USB C Multi Charging Cable Dual 4ft Length Cable Multi USB Cable 0USB Charging Cable Nylon Braided Dual USB C Charger Wire Compatible with Cell Phones/Huawei/Samsung Galaxy/Pixel/LG/Tablets(4ft)

  • ...n 1 MULTI CHARGER CORD-Different from traditional Multiple USB charing cable,we upgrade the splitting designed-The branch bifurcate from the beginning of USB plug.So you could get 2 4ft length cable but only 1 USB port needed..
  • PLENTY CHARGING PORT-2 in 1 Multiple Charging interface with 2*USB C could feed various power supply application..
  • 5A FAST CHARGING-Equiped with 1 fast charging USB C interface max up to 5A current supply,applicable for Andriod Fast Charing Tecnology including XIAOMI HUAWEI and other fast charging enable cellphone.Speed up to 5A charging current while using a compatible charger.NOTE:Fast charging features require compatilibty of Cellphone and adapter..
  • UPGRADE DURABLE MATERIAL: Through 10000+ times twisting test, Comfortable Nylon Braided cord is tangle-free and unbreakable. Over 5000+ bend lifespan makes multi phone charger cable more durable than other cable. In addition, using high-quality heat resistant aluminum alloys terminals to increase reliability and durability..
  • Universal Compatibility: USB C port applicable with Most Cellphone with USB C 3.0/2.0 ....
Check Stock

MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard 10000mAh Raspberry Pi Battery USB Pack Raspberry Pi Latest Version V3Plus Expansion Board Power Supply Type-C for RPI 4B 3B+ 3B 2B+

  • ...vailable on the product page, Two power supply modes: outdoor portable type and indoor UPS power supply mode: 1) As an outdoor portable power supply, the main board is powered by a lithium battery. The maximum external power supply capacity is: 5.1V. 2.5A. 2) As an indoor UPS power supply mode: the UPS power supply interface is connected to an external 5V power supply, the power supply requires 5V 2A-3A, and the maximum output current can reach 5V 3A..
  • 4+2LED are designed to show the status of battery power, charge or discharge:1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)The function of the Power LED is to display whether the UPS is supplying power to the Pi, and the LED is on: it means the output is 5V. LED off: Indicates that there is no voltage at the output. 3) Charge charging indicator LED: When the UPS is externally charged via the TYPE-C USB interface, the Charge LED starts to work.
  • The UPS has overcharge and overcurrent protection functions: When the UPS externally outputs about 4A, the UPS will consider the external circuit to be in a short-circuit state and automatically cut off the output. The lithium battery board that comes with the UPS has an overcharge and overdischarge protection board. Prevents the ba....
Check Stock

ISDT Q6 Lite Battgo Lipo Battery Charger/Discharger, Balance Charger Discharger 15A 300W DC 2-6S LCD Display Digital Smart Battery Balance Charger Li-Po Li-Hv Li-Ion Li-Fe NiMH Ni-Cd Pb

  • ▶ 【AC / DC dual mode】 - AC / DC dual input meet different use requirements. Output: AC /400W, DC /600Wx2..
  • ▶ 【Safe Access】 - Fool-proof input interface. Smart design. The DC input port and the AC input connector are mutually exclusive. Only one input can be selected in one time. Ensure the safety operation..
  • ▶ 【High Power Synchronous Dual Channel】 - with Smart Charging. Smart High Speed Processor delivers parameter interfere to each port. Hassle Free with Maximum charging power up to 600W for single port. Choose ISDT, Powered by Innovation..
  • ▶ 【2.8″ IPS LCD Display Low power consumption】 - 178° visible angle Display clear and distinct Even in varies hard environment or angles As well as in strong sunshine..
  • ▶ 【Two-way USB interface】 - By connecting the charger microUSB port to the PC, all series can acquire latest firmware upgrading. It can also output 5V/2A power through the USB Type-C interface, For charging mobile devices..
Check Stock

Beaster Voice Recognition Module with Microphone Dupont Jumper Wire Speech Recognition Voice Control Board for Arduino

  • This product is a speaker-dependent voice recognition module. It supports up to 80 voice commands in all..
  • This board has 2 controlling ways: Serial Port (full function), General Input Pins (part of function). General Output Pins on the board could generate several kinds of waves while corresponding voice command was recognized..
  • Digital Interface: 5V TTL level for UART interface and GPIO.
  • Analog Interface: 3.5mm mono-channel microphone connector + microphone pin interface.
Check Stock

Clear Vision Pty. Ltd.

  • [Charging Indicator] Red indicator means your device is charging, and green indicator means your device is fully charged..
  • [Convenience]: universal device port, USB charging, portable power supply, computer/laptop USB port, etc..
  • [Intelligent] Built-in Over-Voltage Protection, Over-Current Protection, Over-Charge Protection and Short-Circuit Protection to ensure safely charge. After fully charged, it will quit charging automatically..
  • [Excellent Quality]Wire material selected PVC material, soft and durable, Standard USB interface, neat workmanship, excellent contact with pure copper, finely crafted high quality..
  • [You will receive]: The USB cable is suitable for devices such as USB port shape. We offer this charger USB cable with a 12 month warranty and friendly 24/7 customer service..
Check Stock

MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard 4000mAh Raspberry Pi Battery USB Pack Raspberry Pi Latest Version V3Plus Expansion Board Power Supply Type-C for RPI 4B 3B+ 3B 2B+

  • ...door portable model and Indoor UPS power Supply mode: 1) As an outdoor portable power supply, the motherboard is powered by a lithium battery. and he maximum external power supply capacity is: 5.1V. 2.5A. 2)As an indoor UPS power supply mode: MicroUSB plugs into a normal 5V 2A power adapter, and the external output interface(USB-A interface) can output a maximum of 5.1V.3A. Battery size: 70mm x 41mm x 9.5mm.
  • 4+2LED are designed to show the status of battery power, charge or discharge:1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)The function of the Power LED is to display whether the UPS is supplying power to the Pi, and the LED is on: it means the output is 5V. LED off: Indicates that there is no voltage at the output. 3) Charge charging indicator LED: When the UPS is externally charged via the TYPE-C USB interface, the Charge LED starts to work..
  • The UPS has overcharge and overcurrent protection functions: When the UPS externally outputs about 4A, the UPS will consider the external circuit to be in a short-circuit state and automatically cut off the output. The lithium battery board that comes with the UPS has an overcharge and overdischarge protection board. Prevents the battery from being overcharged and overdischar....
Check Stock

HESTYA 2 Packs Charging Port Replacement 3 Prong Smart Self-Balancing Charging Port Replacement Compatible with Hoverboard Scooter Swegway Swagtron Swagboard CHO

  • What you will get: you will get 2 pieces scooter charging interface, 2 pieces reset switch, 2 pieces waterproof cover, 2 pieces nut accessories.
  • GX12-4 line charging port: charging cable with 3-pin male charger port, 4-pin white plug, it is approx. 9 inch/ 24 cm in length.
  • Quality material: charging port replacement wires are made of copper core, which can reduce charging loss, has good conductivity and low resistance.
  • Easy to install: charging port replacement (3 prong) is very simple to operate, very convenient and quick to install, which can save operating time.
  • Wide application: suitable for 12V/ 24V/ 36V/ 48V scooter, compatible with Swegway, Swagtron, Swagboard, CHO and so on.
Check Stock

New USB Charging Port Socket Circuit Board with Power Switch Ribbon Cable for PS4 JDS 011 001 030 040 055 Controller (JDS-040)

  • Package Includes:1Pc USB Charging Port Socket Board with Flex Ribbon Cable.
  • Compatible with: Sony Playstation 4 PS4 JDS-040.
  • For Sony Playstation 4 PS4 Pro Controller USB Charging Board Socket Circuit JDS-001 JDS-011 JDS-030 JDS-040 JDS-050 with Ribbon Cable.
  • Micro-USB Charging Port Board for Sony Playstation 4 PS4.
Check Stock

USB Charging Port Socket Board JDS-040 JDS 040 for Sony Playstion 4 PS4 Controller + 12 Pin Ribbon Cable

  • Support model : Sony Playstion 4 PS4 (4th Generation DualShock 4).
  • Replace Your Damaged PS4 USB Charging Port Socket Board JDS-040 with 12 Pin Cable.
  • Package include:1 X Charging Port Board + 1 X Flex Cable+ 1 X Screwdriver.
  • Handle Line Flex Cable with USB Port (Handle line Ribbon).
Check Stock

Klarus Extended Strke Bezel for XT11 And RS11 Flashlights, Silver

  • ... body, premium and durability quality, drop resistant and water-resistant..
  • Hidden USB C Port: USB C fast charging, can be charged from the computer, phone adapter, USB socket, power bank, convenient to charge, and high efficiency. Rotate the barrel head to expose the charging port before charging. The charging interface is completely hidden in the barrel when it is not charging, waterproof, dust-proof, and corrosion-resistant, making the interface more durable..
  • Reliable Wilderness LED Light: IPX6 waterproof rating, light is protected from any inclement weather to be your faithful companion anytime, anywhere. The bezel on the head could be used for breaking glass, self-defense, etc..
Check Stock