Raincovo Downstream Injector for Pressure Washer Power Washer Chemical Injector Kit Soap Injector 3/8 Inch Quick Connect 4000 PSI
- Package: Kit Includes chemical injector, 10 feet siphon hose, filter, black nozzle soap with 1/4” quick connect and teflon tape..
- Application: When detergent is sucked out separately, the chemical will not pass through the pump, you could use a variety of chemicals without....
- Characteristic: Chemical injector kit with a metering valve, which can adjust dilution ratio of soap and water. Avoid clogging of the injector and....
- Connector: Downstream Injector has 3/8 inch quick connect. Fits most electric and gas power washer..
- Material: Siphon hose is made of high-quality PVC, used for hot and cold water. Adapter is made of brass and stainless steel. Max pressure is 4000....
Check StockUltimate Washer Adjustable Soap and Chemical Injector Pressure Washer, 3/8-Inch, 4000 PSI, 2-5 GPM
- Soap and Chemical Injector, 200 Degree, 4000 PSI, 2-5 GPM.
- Works with Standard3/8-Inch Quick Connect Pressure Washers.
- Pressure Washer Chemical Injector Kit Includes Injector, Tubing and Filter.
- Black Soap Nozzle (not included with kit) is required for proper operation. Great for Cleaning or Spraying, Compatible with Most Brands.
Check Stock
Tool Daily Compatible Chemical Injector Set for Pressure Washer, Replacement for Briggs and Stratton 190593GS 190635GS 203640GS
- Pressure Washer Soap Injector Kit, compatible Briggs & Stratton Pump 190593GS, 190635GS and 203640GS. Please identify the part number of pressure washer pump, then check if it fits your pressure washer..
- How to replace: Follow soap hose to end and you’ll find injector. Take off soap hose. Use wrench to remove old injector. Clean out any gunk or dried soap in receptacle. Make sure rubber o ring is on injector as pictured. Put ball bearing inside injector and then the spring with small end of spring against the ball bearing. Insert injector into receptacle and tighten injector with 13mm wrench. Don’t overtighten, you’ll break the o ring or crack white metal on pump. Put the soap hose back on..
- If the part on your pressure washer part is worn-out, rusted or hard-water-deposit clogged, you can replace it with this set..
- Package List: Two Chemical Injector Sets, including 2 Brass Barbs, 2 Check Valve Balls, 2 Springs, 4 O-Rings..
Check StockSooprinse Chemical Injector Kit for High Pressure Washer 4000 PSI Adjustable Soap Dispenser with a 1/4 Inch Black Soap Nozzle and Teflon Tape,16 Ft Siphon Hose 3/8 Inch Quick Connect
- ❤【Premium Quality】Made of tough brass and stainless steel,resistant to corrosion and fading..
- ❤【Instructioin Manual】The maximum pressure is 4000 PSI. Flow arrows Marks on the injector and do not install it backwards..
- ❤【Kit Package】The chemical injector kit includes chemical injector, 16 feet tubing (siphon hose), filter and 1/4 inch quick connect black soap....
- ❤【Scientific Design】The soap dispenser kit is equipped with a screw-in valve that adjusts the dilution ratio of chemicals and water to increase....
- ❤【Quality Assurance】Any problem,feel free to contact us.The professional team is always ready to serve you..
Check StockRIDGE WASHER Compatible ChemicalInjector Set for Pressure Washer, Replacement for Briggs and Stratton 203640GS 190593GS 190635GS
- Package: two chemical injector sets include two brass barbs with 1/8 inch-27 male BSP thread, two check valve balls, two springs and four o-rings..
- Compatible: Pressure washer soap injector kit is compatible with Briggs & Stratton Pump 190593GS, 190635GS and 203640GS. Please check the part number of your pressure washer pump and make sure the soap injector matches your pump..
- Function: If the part on your pressure washer pump is worn-out, rusted or hard-water-deposit clogged, you can replace it with this set..
- Attention: When you insert injector into receptacle of pump and tighten injector with 13mm wrench, don’t overtighten, you’ll break the o ring or crack white metal on pump..
- If you have questions, contact us at any time. We provide a service of quick reply within 10 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..
Check Stock
Pressure Washer Manifold Kit Fits for Briggs Stratton | OE Replacement 16031 190627GS 190574GS 020228, with 4 Bolt Power Pressure Washer Pumps
- ...e of the pressure washer pump can be inserted completely inside to make the pin more secure, the sturdy alloy casing helps protect the washer pump from damage, advanced manufacturing technology, high reliability and high performance, standard size, can be easily installed without leakage..
- The Method of Installing a Chemical Injector: The tools that need to be prepared include a half-inch wire wrench or a half-inch sleeve, and a long and thin tool for penetrating into narrow places. Use a half-inch line wrench or socket to remove the old chemical syringe from the pump. Make sure that the spring and ball are removed from it and not left in the pump manifold. Install the O-ring and the inside, use a tool to install the O-ring into the internal groove of the injector..
- Package List: 1 × chemical injector + 1 × inlet check valve + 4 × mounting bolts + 4 × mounting o-rings, please compare with your old high pressure washer manifold kit when you buy, and then buy it..
- Customer Service: You will get 24-months service, hassle-free return and money back policy, buy with confidence! If you have any questions, please contact us by email, we will reply you within 12 hours..
Check StockMingdun 4 Bolt Replacement Manifold Pressure Washer Manifold Kit with Unloader for 16031 190627GS 190574GS 020228 EXWGV1721
- Fitment: Pressure Washer Manifold Kit 16031 190627GS 190574GS..
- Package included: 1*Chemical Injector 1* Inlet Check Valve 4 *Mounting Bolts 4 *Mounting O-Rings.
- Fitment: Pressure Washer Manifold Kit 16031 190627GS 190574GS. Package Include:1 Chemical Injector, 1 Inlet Check Valve, 4 Mounting Bolts, 4 Mounting O-Rings..
- Replaces: Part #16031 190627GS 190574GS..
- Note: Please review all the product information to ensure that this product is compatible with your original unit. And you can feel free to contact us if you have any questions about our products..
Check StockGeneral Pump 2.3mm Pressure Washer Detergent Injector #100776
- Fixed Chemical Injector, High Draw, Chemical Draw Up To 20%.
Check StockRaincovo Chemical Injector Kit, Soap Injector for Pressure Washer, 1/8 Inch 27 Male BSP Thread
- Chemical injector kit fits most pump which is an OEM brand. Replaces pump 203640GS 308452002, 190593GS and 190635GS..
- Soap injector makes cleaning so much easier and faster. It’s a great replacement for the old rusted one..
- The brass fitting is a 1/8 inch 27 male BSP thread. Install them and the soap dispenser works just like new..
- How to install: Take the brass fitting, drop in the little ball, insert spring with small end against the ball, then attach it back on the pump. Do not over-tighten otherwise it will snap off..
- Kit includes 2 pieces fittings, 2 pieces small balls, 2 pieces springs, 2 pieces o-rings outside and 4 pieces inside..
Check StockBopfimer 3/4 Garden Irrigation Device Venturi Fertilizer Injector Switch Water Tube Kit
- Excellent chemical resistance to most of the chemicals Highly efficient and compact differential pressure injection device.
- Suitable for Fertilizer and chemical injection through drip and sprinkler irrigation systems..
- Based on the motive water flows and Vacuum suction, just need to install the black fertilizer applicator in parallel on the garden lawn water pipe..
- Economical and low cost options, can available to 3/4 inch BSP inlet/outlet connection Includes a fertilizer injector..
Check StockLQ Industrial 1Inch Irrigation Venturi Fertilizer Mixer Injectors Black Plastic Irrigation Tube Agriculture Tool
- Packing: 1PC, material: plastic, size: 195mm(7.7in)x93mm(3.66in)..
- Sturdy, durable, not easy to fade, long service life..
- It is a highly efficient and compact differential pressure injector device with excellent chemical resistance to most chemicals. Affordable, lower....
- Using the principle of siphon, it is convenient to suck in various types of fertilizers and inject them into the irrigation pipes, so that the water....
- Suitable for 1Inch BSP inlet/outlet connectors, suitable for fertilizer and chemical injection in agricultural irrigation systems..
Check StockTroy-Bilt 020208 020208-0 020208-01 PUMP 3000 psi POWER PRESSURE WASHER WATER PUMP
- Fits Troy Bilt: 20208 / 020208 / 020208-0 / 020208-01.
- 2800-3000 PSI / 2.4 GPM – MAX 2.5 GPM FACTORY RATING.
Check Stock
Diesel Fuel Filter for VW Golf Jetta TDI HENGST Made in Germany
- Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
- Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
- Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
- Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
- Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.
Check Stock
