Categories

Best Chemical resistant Thread

#14 x 4 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 500 Type 17 Wood Cutting Point 2-3/4 of Thread Length 14 Screw Diameter 4 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
  • Size Number: #14 / Length of Screw is 4" inches with 2-3/4" inches of thread.
Check Stock

#14 x 5 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 3-1/4 of Thread Length 14 Screw Diameter 5 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #14 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #3 Square Drive.
  • Size Number: #14 / Length of Screw is 5" inches with 3-1/4" inches of thread.
Check Stock

3/8-16 x 1-1/2\ Socket Head Cap Screws Bolts, Stainless Steel 18-8 (304), Bright Finish, Fully Threaded, Allen Socket Drive, 20 PCS

  • The socket head cap screws are 100% Stainless Steel 18-8 (304) which offers a high level of chemical and corrosion resistance..
  • Package Included: 20 x Socket Head Cap Bolts/Screws..
  • Socket Head Cap Screws are great to have around for use in wood and wet environments..
Check Stock

#10 x 3-1/2 Marine Grade Type 316 Stainless Steel Deck Screw Square Drive Bugle Head Quantity 100 Type 17 Wood Cutting Point 2 1/4 of Thread Length 10 Screw Diameter 3 1/2 Screw Length

  • HIGH QUALITY STAINLESS STEEL: These #10 Wood Screws (Drywall Screws) are high quality grade Marine Grade Type 316 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today..
  • Type 316 steel is an austenitic chromium-nickelstainless steel that contains between two and three percent molybdenum. The molybdenum content increases corrosion resistance, improves resistance to pitting in chloride ion solutions and increases strength at high temperatures. Type 316 Stainless is more resistant to corrosion than 18-8 stainless but not as strong. Ideal for Salt Water envirovments or chemical exposure environments..
  • Type 17 Point - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling.
  • Features a Bugle Head, and a Square drive to be used with a #2 Square Drive.
  • Size Number: #10 / Length of Screw is 3-1/2" inches with 2-1/4" inches of thread.
Check Stock

Niagara Cutter NTM160-1/4X20UN-.187 NTM160 Carbide Thread Mill, AlCrN Finish, 3 Flutes, 1/4 x 20 UN Cutting Diameter, 3/16' Shank Diameter, 2-1/2' Overall Length

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates.
  • Thread milling is a superior process for threading most materials.
  • Helical flute design reduces thread chatter, improving product thread finish and quality.
  • Aluminum chromium nitride (AlCrN) coating provides good hardness and better resistance to chemical breakdown in high-heat applications than TiAlN, TiCN and TiN coatings.
Check Stock

100 Qty #8 x 3/4\ Black Phillips Modified Truss Head Wood Screws (BCP1078)

  • [COATED SCREWS] 2.5 mil of computer controlled powder coating apllied over zinc plating and chromate sealer. Resists harmful UV rays and chemical breakdown. Completely free of volatile organic compounds (VOC), and is entirely recyclable.
  • [ZXL NO RUST] 5/16" Cupped HWH is manufactured from a strong ZAMAC zinc-aluminum alloy. Molded Head encapsulates the EPDM washer, which fits neatly and conforms to the inside of the mold.
  • [KS LO-ROOT THREAD DESIGN] Fastener thread transitions from fine to coase. The low root design provides excellent pullout strength versus traditional or HI-LO thread forms.
  • [MICRO-BIT POINT DESIGN] Drill point design consistently penetrades metal panels, eliminates the need to "punch" the metal panels with a sharp point to start the drilling process. MB point is excellent for penetrating multiple thicknesses of steel often found on ridge cap or trim applications.
Check Stock

M6-1.0 x 20/25/30/35/40mm Flat Head Socket Cap Screws Allen Socket Drive DIN 7991 Stainless Steel 18-8 304 Bright Finish 50 PCS

  • The socket head cap screws are 100% stainless steel 304 (A2-70) which offers a high level of chemical and corrosion resistance..
  • Thread Length: 20 mm, 25 mm, 30 mm, 35 mm, and 40 mm..
  • Package Included (NOTE Total Length for Flat Head Socket Screws): M6 x 20mm (10 PCS), 25mm (10 PCS), 30mm (10 PCS), 35mm (10 PCS), 40mm (10 PCS), and all come in a quality plastic storage box..
  • Flat Head Socket Screws are great to have around for use in wood and wet environments..
Check Stock

LMX 100pcs M1.4-0.3×3mm Flat Head Machine Screws, Phillips Cross Screw, Phillips Stainless steel color M1.4x3mm-100pcs Phillips Head screw 0

  • The pan head machine screws are 100% stainless steel 18-8 (304) which offers a high level of chemical and corrosion resistance..
  • Package Included: 50 x Phillips Pan Head Machine Screws #10-24 x 1 Inch..
  • Pan Head Machine Screws are are great for both indoor and outdoor uses. This stainless steel is very strong and provides excellent rust resistance..
Check Stock

HVAZI #4-40 UNC Stainless Steel Phillips Pan Head Machine Screws Nuts Assortment Kit

  • High Quality 220PCS #4-40 UNC 304 Stainless Steel Phillips Pan Head Machine Screws and Nuts Assortment Kit.
  • The assortment contains:#4-40x3/16",#4-40x1/4",#4-40x5/16",#4-40x3/8",#4-40x1/2",#4-40x5/8",#4-40x3/4",#4-40x7/8",#4-40x1"(Length is measured from under the head),Each 20 piece,and Nut 40 piece.
  • 304 stainless steel have good chemical resistance and may be mildly magnetic.
  • 100% new,All contained in a compact and see through compartmented plastic Box.Easy to install and durable to use.
Check Stock

75mm IBC Tote Tank Butterfly Valve Taps Water Adapter IBC Tank Water Container

  • 75mm (DN50) Ball Valve- Versatile as chemical process and acid, liquid storage buckets, tanks, container outlet control valves. This IBC tote adapter comes with coarse S75x6 thread with a diameter of 2.95 inches (75mm) . Please note that this IBC tote fitting is coarse thread with 6 mm pitch (distance between the threads)., NOT fine thread.Please check before purchase..
  • DURABLE and HEAVY DUTY-Made of premium plastic materialc and high density polyethylene, this adapter is acid and alkali resistant. It can be used for 3500 times repeatedly. Super durable for long time use..
  • QUICK and EASY INSTALLATION-Come as completed adapter. Just connect to the IBC/Water tank and you can Use it..
  • VERSATILE and NO-LEAKAGE-used for plastic container outlet control to prevent liquid from splashing around. Supported by strong silicone gasket, never worried about leakage..
  • Packet Included: 1x Assembled DN50(75MM) Ball Valve, 1 year warranty.
Check Stock

M5 x 12mm Socket Head Cap Screws Bolts Stainless Steel 304 Metric Machine Hex Socket Screw Allen Hex Drive Fully Thread 50PCS

  • High quality: Made of high quality 304 stainless steel, with high chemical resistance and corrosion resistance..
  • Package Included: 50 PCS Socket Head Cap Bolts/Screws (M5 x 12mm).
  • Whenever you need us, please contact us by email or Q&A. We will provide you with professional services and reply to you as soon as possible. If you are not satisfied with the product, you can get a full refund, and you can buy it with confidence..
Check Stock

1/4-20 x 3/4 1/2 to 6 Available Carriage Bolts Screws Stainless Steel 18-8 304 Round Head Square Neck Fully Threaded 25 PCS

  • The carriage bolts are 100% stainless steel 18-8 (304) which offers a high level of chemical and corrosion resistance..
  • These bolts can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems..
Check Stock

1/4-20 x 2-1/2' (1/2' to 6' Available) Carriage Bolts Screws, Stainless Steel 18-8 (304), Round Head, Square Neck, Fully Threaded, 25 PCS

  • The carriage bolts are 100% stainless steel 18-8 (304) which offers a high level of chemical and corrosion resistance..
  • These bolts can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems..
Check Stock