Categories

Best China Vfd

LAPOND High Performance VFD Inverter VFD Drive 2.2KW 220V 3HP 9.6A,Variable Frequency Drive for Motor Speed Control,SVD-PS Series

  • This is single phase VFD with single phase 220V INPUT and three phase 220V OUTPUT,ONLY work with 3 phase 200-250V asynchronous motor,If your motor is heavy load, pls choose a higher Horsepower vfd than your motor's or contact sales for model selection suggestion..
  • SVD-PS Series VFD has better performance Vector controlled and stability to enable motor to achieve high torque in low speed rotation to increase motor working efficiency.
  • support fast accelerate/deccelerate with external optional braking resistor(100W ≥70Ω) and external potentiometer(10K).
  • Rich of digital and analogy control terminals for versitile control, well controlled fans produce low acoustics noise.The fan only work in VFD running status..
  • Application : spindle motor,lathe,milling,pumps,treadmills,conveyors,winding machine, mixer, extruder, slitter, compressor, ventilator,elevator,centrifuger and other machines..
  • We are the original factory,any technical issues do not hesitate to contact us.
Check Stock

RATTMMOTOR CNC Spindle Motor Kit 2.2KW 80mm Water Cooled Spindle Motor 220V ER20 400Hz 24000RPM+2.2KW VFD Drive Inverter 220V+80mm Spindle Motor Mount Clamp+ER20 Collets+80W Water Pump for CNC Router

  • 【Package Include】: ①1 x 2.2KW 220V Water Cooled Spindle Motor ②1 x 2.2KW VFD 220V ③1 x 80mm Spindle Motor Mount(with 3pcs screws) ④1 x 80W....
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW water-cooled 8A Φ 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Communication....
  • 【Multi-Protection Functions of VFD】Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection,....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
Check Stock

BestCH AC/DC Adapter for ViewSonic VFD820 VFD820-50 VS14894 VFD820-70 Digital Picture Photo Frame Power Supply Cord Cable PS Charger Mains PSU

  • World Wide Input Voltage 100-240VAC 50/60Hz.
  • OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection).
  • Tested Units. In Great Working Condition.
  • Please check your model whether it is the same as the listing before purchasing. We do not accept responsibility if you purchase wrong products.Thank you!.
  • BestCH AC / DC Adapter For ViewSonic VFD820 VFD820-50 VS14894 VFD820-70 Digital Picture Photo Frame Power Supply Cord Cable PS Charger Mains PSU.
Check Stock

3HP 2.2kW AC 220V Single-Phase VFD Drive Inverter Single to 3 Phase Professional Variable Frequency Drive Speed Controller AT1-2200X for 3-Phase 2.2kW AC Motor

  • ➤【VFD Drive】- This VFD Drive uses unique control method to realize high moment of force, high precision and wide speed regulating range driving, with high performance..
  • ➤【Feature】- Variable Frequency Drive has good anti-trip performance and ability to adapt to rough power, temperature, humidity and dust interference, greatly improved stability..
  • ➤【PWM control】- By optimizing PWM control technology and electromagnetic compatibility, it satisfies users' requirement of low noise, low electromagnetic interference..
  • ➤【Easy to use】- Simple to operate and wire, connect to wires by screw terminals which are more convenient..
  • ➤【Design】- VFD Drive is designed with large heat sink for better heat dissipation..
Check Stock

Poly Nail Gel Kit with 6W LED Nail Light MYSWEETY 8PCS Nail Extention Gel Nail Enhancement Builder Nail Gel Professional Nail Gel Kit with Top & Base Coat + Slip Solution + Painting Gel + Painting Brushes

  • This is single phase VFD with 1 phase INPUT and 3 phase OUTPUT,the power is 2.2KW, 220V,10A, VFD Dimension: 130 x 103 x 200 mm (L x W x H).....
  • Application: Spindle Motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor and other....
  • Due to the VFD product is a flexibly configurable device , you are welcomed to consult with our CS make best choice for your exact application..
  • Simple to operate and wire, convenient for you to use. Warranty: 1 Year replace or refund!.
Check Stock

Southwire Tools & Equipment 21550T Clamp Meter with Built-In NCV Tester

  • VFD Mode provides superior accuracy for working on VFD-controlled equipment.
  • Advanced power efficiency and harmonics measuremenets for system level performance analysis.
  • Powerful Worklights no only assist with clamping but are bright enough to serve as a primary worklight.
  • FLIR Tools Mobile connects the FLIR CM83 to your compatible smartphone and table via Bluetooth.
  • METERLiNK technology wirelessly integrates electrical readings on your infrared image with FLIR Thermal Cameras.
Check Stock

RATTMMOTOR CNC 2.2KW Air Cooled Spindle Motor Kit 220V Spindle Motor ER20 80mm 24000RPM+2.2KW VFD Drive 220V Inverter Variable Frequency Drive Converter+80mm Mount Clamp Bracket for CNC Router Machine

  • 【Package Include】: 1 x 2.2KW 220V Air Cooled Spindle Motor + 1 x 2.2KW VFD Inverter 220V + 1 x 80mm Spindle Motor Mount(with 3pcs screws).
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW air-cooled 8A Φ 80x195mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.005....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Communication....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
  • 【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much....
Check Stock

RS-550s 18v (12v - 20 volts) DC Motor Round Shaft - High Power & Torque for DIY Electric/Electronic Projects, Drills, Robots, RC Vehicals, Remote Controlled Cars/Robot, Saw Repair/Replacement Engine

  • 【PACKAGE INCLUDE】-1pcs 110V/1.5KW Square Spindle Motor(4.3kg,9.5lbs） +1pcs 110V/1.5KW VFD Inverter +13pcs Collets ER11(1mm-7mm) + 20pcs Drill Bits+ 1meter aviation wire +2pcs wrenches.
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process.
  • Runout off less than 0.005mm beyond expectation..
  • 【EASY AND FAST TO INSTALL 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.It includes wire and 2 wrenches to connect spindle motor with VFD.It will take just 5 minutes to install all and make all functions running..
  • 【APPLICATION】-Wood/Plastic/Aluminum carving/engraving machine, advertisement engraving machine, CNC router machine, small sized processing center, high speed centrifuge etc..
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied and get all problems resolved..
Check Stock

VFD 220V 0.75KW 1hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(0.75KW, 220V)

  • IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized)..
  • This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.Work with 220V single phase input and 220V three phase input.you can just connected L1/L2 to any two of VFD input R/S/T.
  • This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input.Can work well with the Mach 3 controller.
  • Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
  • If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one ..
Check Stock

4KW 220V VFD Inverter Variable Frequency Drive Converter Driver Controller 5HP 3-Phase Output 18A VSD with 2m Extension Cable For Spindle Motor Drive Control/CNC Router Engraving Milling Machine

  • Input voltage:single phase or three phase 220V 60Hz.
  • Cable:parcel include 2m extension cable/control panel box.
  • Output Current:18A；this VFD can not install brake resistor..
Check Stock

CNC Spindle CNC Motor 110V 1.5KW Air Cooled Spindle Motor 65mm 4 Bearings 24000RPM 400HZ for CNC Router Machine

  • 【BASIC INFORMATION】-This spindle motor should work with VFD 110V,400HZ. 2 Poles, Collet ER11-6mm(compatible with bits between 1mm and 7mm....
  • 【SPINDLE ADVANTAGE 】-It made less noise when working, Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than....
  • 【EASY AND FAST TO ASSEMBLE 】-We offer pre-soldered aviation wire , You will take 2 minutes to connect spindle motor with VFD..
  • 【WIDE APPLICATION】-Kinds of engraving and drilling material :Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass,....
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing....
Check Stock

MYSWEETY 29 Inch Colorful Hair Mannequin Head Hairdressing Practice Training Doll Heads Cosmetology Hair Styling Mannequins Heads with Clamp + Practice Tools PINK

  • ✔️Package include: ①1 x 2.2KW 220V Spindle Motor ②1 x 2.2KW 220V VFD ③1 x 75W 220V Water Pump ④1 x 196 in Water Pipes ⑤1x40 in Electric....
  • ✔️2KW Spindle Motor：Technical Parameters:φ3 x 13 in (Diameter: 7.5 cm x Length: 33.6 cm).
  • ✔️Water Pump：This is a high-performance, energy-efficient pump and is well-designed for use in spindle, suitable for 0.8KW, 1.5KW, 2.2KW, 3KW....
  • ✔️1 Year Warranty：We offer 1 year warranty, if you have any questions, please contact us, our customer service team are waiting for helping you....
Check Stock

Human Touch\Novo\ Full Body Coverage Zero-Gravity L-Track Massage Chair, Black

  • [ L TRACK DESIGN & MASSAGE TECHNIQUE ] The length of our chair L Track has a larger massage range from neck shoulder back waist hip to the leg also achieves knocking kneading tapping clapping rolling shiatsu and other massage methods ..
  • [ ZERO GRAVITY ] One-button zero gravity mode handrail linkage design makes your body and legs to be presenting status of 126°± 7° let your heart lower than your legs completely relax just like floating in space..
  • [ BLUETOOTH MUSIC ] Space capsule streamlined hood design with hidden stereo Bluetooth speakers. Let you enjoy the music while massaging easier to enter the state of relaxation..
  • [ ZERO SPACE & HIP WARIMING ] One button slide front design only reserved 5cm against the wall to save more space. Also the upgraded heating device increases the heating range from waist to hip..
  • [ VFD LCD CONTROLLER ] The newly designed big VFD LCD remote control can be viewed easily.This chair can be placed in the office living room study or bedroom so that you can enjoy a simple and effective 15-minute massage in your spare time..
Check Stock