Categories

Best Chip High Frequency Inductors

150 pcs Inductor Large Assortment 15 Values 10uH to 4.7mH, 1W, 1 watt

  • 【Small Vertical Inductive】 Small Vertical Inductors Occupy Less Space..
  • 【Performance Stability】 The Inductor Coil Is Protected with PVC or UL Tube To Ensure Stable Performance..
  • 【Feature】 this Choke Inductor Has Special Guide Pin Structure.
  • Not easy to produce open circuit phenomenon..
  • 【Specification】 1uh to 220uh 1MH to 20MH.
  • The Choke Coil Inductors Arefi SMALL Distributed Capacits And High Self-Resonance Frequency..
  • 【Include】 10UH, 100UH, 220UH, 1UH, 4.7UH, 15UH, 33UH, 150UH, 1MH, 2.7MH, 10MH, 20MH, 10UH, 1MH, 10MH.
Check Stock

BOJACK 15 Values 160 Pcs Inductor 10 uH to 20 mH DIP Radial Power Choke Inductors Assortment Kit

  • Small vertical inductors occupy less space..
  • The inductor coil is protected with PVC or UL tube to ensure stable performance.
  • This choke inductor has special guide pin structure.
  • Not easy to produce open circuit phenomenon.
  • The choke coil inductors are of small distributed capacitance and high self-resonance frequency.
  • Include：10uh, 1uh, 33uh, 2.7mh, 100uh, 4.7uh, 150uh, 10mh, 1mh, 220uh, 15uh, 20mh 15model, Packed in A plastic storage case.
Check Stock

145pcs inductor coil 10uH-10mH choke inductor assortment kit vertical high frequency inductor to pass high frequency industrial electrical low frequency block

  • With special guide pin structure, not easy to produce open circuit phenomenon..
  • Small vertical inductors occupy less space..
  • 145 pieces of inductors in 12 values can meet your general needs..
  • Small distributed capacitance and high self-resonance frequency..
Check Stock

Martin Logan - ElectroMotion ESL - Hybrid Electrostatic - Each - Black

  • High frequency transducer: XStat CLS electrostatic transducer.
  • Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
  • MicroPerf panel is housed within a radical aluminum and composite AirFrame.
  • Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Recommended amplifier power: 20-300 watts per channel, Crossover frequency: 500 Hz.
  • Convenient push-style speaker terminals for bare wires, pins, or bananas, Sturdy, 1/4-20 ETC spikes.
  • Frequency response: 42 - 22,000 Hz ±3 dB, Dispersion: 30-degrees x 34" line source, Sensitivity: 91 dB/2.83 volts/meter.
  • Nominal Impedance: 6 Ohms, 1.6 @ 20 kHz, compatible with 4, 6, or 8 ohm rated amplifiers.
  • Weight: 35.5 lbs. each, Dimensions: 52.1" high, 9" wide, 16.3" deep.
Check Stock

MartinLogan ElectroMotion ESL Electrostatic Floorstanding Loudspeaker - Each (Gloss Black)

  • High frequency transducer: XStat CLS electrostatic transducer.
  • Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
  • MicroPerf panel is housed within a radical aluminum and composite AirFrame.
  • 129 square inches of sound radiating surface on both the front and back.
  • Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 42 - 22,000 Hz ±3 dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-300 watts per channel.
  • Dimensions: 52.1" high, 9" wide, 16.3" deep.
Check Stock

Amidon FT-114-43, Nickel Zinc Ferrite Toroidal Core, Type 43

  • Wldely used for medium frequency inductors and wideband transformers up to 50 MHz. Very good frequency attenuation frorn 30 MHz to 400 MHz.
  • Suited for low power, high inductance resonant clrcuits and wideband applications..
Check Stock

Broadband Pre-tensioning T-Piece Bias Tee High Frequency Inductance Amplifier Module for Optical Modulation Drive

  • 【Isolating capacitance】: isolating dc to prevent dc voltage from leaking to subsequent circuits or test instruments.
  • 【Firmly Structure】 consists of high frequency inductors and capacitors with ultra-broadband, near idealization and no resonant point..
  • 【Application】: Broadband amplifier, optical fiber communication, optical modulation drive, other test and measurement applications.
  • 【High frequency inductance】: isolate ac information to prevent high frequency signals from leaking into the power supply system..
  • 【Size】Working frequency: 10MHZ-6GHz--Insertion loss 003c 1.2 dB--Operating Voltage: DC1-50V--Normal working current: 003c 0.5A.
Check Stock

2 JBL Pro JRX215 15 2000w Professional Passive PA/DJ Speakers 8 Ohm JRX 215

  • Features: JRX215 15" Two-Way Sound Reinforcement Loudspeaker System. JBI 15 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon....
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF....
  • Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power....
  • Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL: 129 dB. Nominal Dispersion : 90 x 50. Crossover....
  • High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive TransitionWave guide. Low Frequency Driver : JBI M115-8A.....
Check Stock

MartinLogan Motion SLM X3 Ultra-Slim 3-Channel Passive Soundbar - Black

  • L-C-R soundbar, Slim design, Binding Posts: Push style.
  • High Frequency Driver: Three 1" x 1.4" Folded Motion Transducers with 5.25" x 1.75" diaphragm.
  • Low Frequency Drivers: Six 4" paper cone, sealed cabinet.
  • Components: Custom air core coil inductors, polyester film capacitors in series and low DF electrolytic capacitors in parallel, overall system thermal/current protection.
  • Frequency Response: 120–23,000 Hz ± 3 dB.
  • Dispersion: 80° x 80°, Sensitivity: 93 dB @ 2.83 volts/ meter.
  • Impedance: 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers..
  • Crossover Frequency: 3,000 Hz (2-way design), Recommended Amplifier Power: 20–140 watts.
  • Dimensions with wall bracket (HxWxD): 6.3" x 48" x 2".
Check Stock

Mega Electronic Component Kit Assortment, Capacitors, Resistors, LED, Transistors, Diodes, 1n270 Germanium, DC Jacks, opamp, PCB, Speaker, 1900 pcs

  • 【Small Vertical Inductive】 Small Vertical Inductors Occupy Less Space..
  • 【Performance Stability】 The Inductor Coil Is Protected with PVC or UL Tube To Ensure Stable Performance..
  • 【Feature】 this Choke Inductor Has Special Guide Pin Structure.
  • Not easy to produce open circuit phenomenon..
  • 【Specification】 1uh to 220uh 1MH to 20MH.
  • The Choke Coil Inductors Arefi SMALL Distributed Capacits And High Self-Resonance Frequency..
  • 【Include】 10UH, 100UH, 220UH, 1UH, 4.7UH, 15UH, 33UH, 150UH, 1MH, 2.7MH, 10MH, 20MH, 10UH, 1MH, 10MH.
Check Stock

(2) JBL JRX225 Dual 15\ Professional 4000w Passive DJ/PA Speakers 4 Ohm JRX 225

  • Features: JBI JRX225 Dual 15" 2000 Watt Passive DJ/PA Speaker. Dual JBI low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil for greater efficiency and power handling. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver.
  • Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure.
  • SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 500 W / 2000 W.
  • Frequency Range (-10 dB) : 42 Hz - 18 kHz. Frequency Response (3 dB) : 62 Hz - 13 kHz. Sensitivity (1w/1m) : 100 dB SPL. Nominal Impedance : 4 ohms. Recommended Amplifier Power : 500 W to 1000 W into 4 ohms. Maximum SPL : 133 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.2 kHz.
  • Dimensions (H x W x D) : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in). Weight : 42.6 kg (94 lb). High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive Transition Waveguide. Low....
Check Stock

MartinLogan ElectroMotion ESL X Floor-Standing Speaker Each (Satin Black)

  • High-frequency transducer: XStat CLS electrostaic transducer.
  • Panel dimensions: 40" x 8.6" (102cm x 22cm), Radiating area: 344 in2.
  • Low-frequency driver: Two 8” (20.3 cm) high excursion, high-rigidity paper cones with extended throw driver assembly, non-resonance asymmetrical chamber format, bass reflex.
  • Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 41–22,000 Hz ±3dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-400 watts per channel.
  • Dimensions: 59.2 x 9.4 x 20.7 (150.3cm x 23.8cm x 52.6cm), Weight: 52lbs. (23.6kg) each.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock