Categories

Best Chip Tuing Tool

2Pcs Module Dot Matrix Display Module Square 88 replacement for Control Chip DIY Kit 1000x1000mil 1 x 1inch

  • Advantage: Internal integrated static RAM, each data can be addressed during update without changing all displays.Practical Tool: Integrated scanning circuit inside the chip, does not occupy system resources..
  • Product Brief: Adopt replacement for control chip, internally integrate BCD encoder, scanning circuit and drive circuit..
  • Note: The chip only occupies three IO ports, which can be cascaded..
  • Practical Tool: Integrated scanning circuit inside the chip, does not occupy system resources..
  • Great Performance: Integrated analog and digital brightness control, consistent brightness display at each point..
Check Stock

Makita HP2050 3/4\ Hammer Drill

  • The DCD999 DEWALT 20V hammer drill gets up to 42% more power** when paired with FLEXVOLT batteries.
  • Both cordless hammer drills are compatible with all DEWALT 20V MAX* and FLEXVOLT Batteries.
  • 20X BRIGHTER LED: The DCD999 3-mode LED provides lighting in dark or confined spaces up to 20x brighter than the DEWALT DCD985.
  • EXTENDED WORK TIME WITH LED: The DCD999 features an LED spotlight mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces.
  • VERSATILITY: The DCF887 has application versatility with 3-speed settings.
  • ADDED CONTROL: The DCF887 helps prevent over-tightening fasteners with added control from Precision Drive in speed 1 setting.
  • VISIBILITY: The DCF887 creates visibility without shadows from 3 LEDs with a 20-second delay after trigger is released.
  • COMPATIBILITY: The DCB1106 6 Amp Charger is compatible with 20V MAX* batteries and FLEXVOLT 20V/60V MAX* batteries..
  • DCD999 is Tool Connect Chip Ready: Chip pocket accepts Tool Connect Chip DCE042 and connects with Tool Connect Site Manager app for easy asset management on the jobsite. (DCE042 sold separately).
Check Stock

Micro 100 T-105-V Cut Off Tool - T Style - V-Groove - Brazed, 1/8\ Width.760\ Length, 11/16\ Square Shank Height, 5\ OAL, Uncoated

  • Double ended "T" style cut-off tool that is parallel ground to help achieve a straighter cut.
  • Tops are hollow ground to help curl the chip to center for better evacuation.
  • Additional V-groove ground into the top of the tool forces the chip into a " W" form to pull the chip to center resulting in better surface finish and chip evacuation.
  • Hardened and precision ground steel blades.
  • Solid carbide tipped with zinc coated hardened steel shank.
Check Stock

Bitray Professional Tool Chip Extraction Tool PLCC IC Extractor Chip Spring Assisted Extractor Puller Removal Puller Tool

  • Package includes: U Type IC Chip Extractor x 1 + PLCC IC Chip extractor x 1..
  • The U-shaped IC extractor is used to pull out the IC chip on the circuit board. It is easy to use and simple. It is an ideal tool for families and students to do experiments..
  • PLCC IC chip extractor is a spring-assisted extraction tool, specially designed to remove PLCC..
  • The body is made of stainless steel, and there is a PVC insulation package outside to prevent static electricity from damaging the IC components..
  • It is very suitable for professional maintenance personnel, such as TV/DVD/PC maintenance personnel or IC workers..
Check Stock

Micro 100 T-100-V Cut Off Tool - T Style - V-Groove - Brazed, 1/16\ Width.760\ Length, 1/2\ Square Shank Height, 4-1/2\ OAL, Uncoated

  • Double ended "T" style cut-off tool that is parallel ground to help achieve a straighter cut.
  • Tops are hollow ground to help curl the chip to center for better evacuation.
  • Additional V-groove ground into the top of the tool forces the chip into a " W" form to pull the chip to center resulting in better surface finish and chip evacuation.
  • Hardened and precision ground steel blades.
  • Solid carbide tipped with zinc coated hardened steel shank.
Check Stock

Micro 100 T-103-V Cut Off Tool - T Style - V-Groove - Brazed, 1/8\ Width, 3/4\ Length, 1/2\ Square Shank Height, 4-1/2\ OAL, Uncoated

  • Double ended "T" style cut-off tool that is parallel ground to help achieve a straighter cut.
  • Tops are hollow ground to help curl the chip to center for better evacuation.
  • Additional V-groove ground into the top of the tool forces the chip into a " W" form to pull the chip to center resulting in better surface finish and chip evacuation.
  • Hardened and precision ground steel blades.
  • Solid carbide tipped with zinc coated hardened steel shank.
Check Stock

DEWALT FLEXVOLT ADVANTAGE 20V MAX* Angle Grinder, Paddle Switch, 4-1/2-Inch to 5-Inch, Tool Only (DCG416B)

  • Angle grinder gets up to 54% more power when paired with FLEXVOLT batteries.
  • Kickback Brake of DEWALT angle grinder engages with maximum force to quickly stop the wheel and shut off the grinder when a bind-up occurs..
  • E-CLUTCH shuts down the motor of DEWALT angle grinder in under a tenth of a second when a pinch/stall is detected.
  • Compatible with all DEWALT 20V MAX* and FLEXVOLT Batteries.
  • E-Switch Protection requires the trigger switch to be cycled (turned off and on) in the event of a power outage or other unexpected shutdowns to restart.
  • Tool Connect Chip Ready: Chip pocket accepts Tool Connect Chip DCE042 and connects with Tool Connect Site Manager app for easy asset management on the jobsite. (DCE042 sold separately).
Check Stock

DEWALT FLEXVOLT ADVANTAGE 20V MAX* Circular Saw, 7-1/4-Inch, Cordless, Tool Only (DCS573B)

  • UP TO 77% MORE POWER** when DEWALT 7 1/4 circular saw is paired with FLEXVOLT batteries.
  • FASTER CUTTING: Powerful brushless motor of the cordless circular saw delivers 5,500 RPM for faster cutting.
  • The compact circular saw has the maximum depth of cut of 2-9/16-inch at a 90 degree.
  • Maximum depth of cut of 2-inch at a 45 degree.
  • ELECTRIC BRAKE stops the blade after the trigger is released.
  • INCREASED VISIBILITY: Bright LED increases visibility and cut accuracy.
  • EASY STORAGE: Integrated rafter hook for quick and easy storage.
  • MINIMIZES DUST: Optional dust port compatible with the DEWALT AirLock system or a standard 35 mm dust extractor to minimize dust during cutting.
  • Tool Connect Chip Ready: Chip pocket accepts Tool Connect Chip DCE042 and connects with Tool Connect Site Manager app for easy asset management on the jobsite. (DCE042 sold separately).
  • COMPATIBLE with all DEWALT 20V MAX* and FLEXVOLT Batteries.
Check Stock

VVDI Mini Key Tool Remote Key Programmer Compatible for iOS & Android Remote Renew Function Global Version

  • [Works on IOS and Android] Before you ordering VVDI Mini Key Tool, you can download the app "Xhorse" to check whether your vehicle or keys are compatible. Xhorse Mini Key Tool allows you to generate and clone the chip but not program. If you need program your vehicle, please buy MINI OBD together..
  • [Frequency Test and Chip Clone] VVDI Mini Key Tool enable you reading keys frequency fast and accurant. It has ability to clone ID4C/4D, 46, 48, ID70, ID72 but you may need use Xhorse super chip to clone it. Support the power test within the range of 300-450Mhz. The test frequnecy distance is 11.8”. Based on mobile App via Bluetooth..
  • [Online Techinical Support] You can contact online support team 7/24 via Xhorse app. The professional engineer will help you fix your issue quickly..
  • [Free 96bit 48-Clone function] You can get free 96bit 48 clone authorization after you wiring more than 10 xhorse remotes..
  • [Global version with databse] Support 128 brands, over 2000 vehicle models. Generate more abundant and thorough key pictures, transponder types, key blanks and remote matching data..
Check Stock

SKIL 2-Tool Combo Kit: Pwrcore 20 Brushless 20V 1/2\ Heavy Duty Hammer Drill & Cordless Impact Driver, Includes 2.0Ah Lithium Battery & Pwrjump Charger - CB743801

  • The DCD999 DEWALT 20V hammer drill gets up to 42% more power** when paired with FLEXVOLT batteries.
  • Both cordless hammer drills are compatible with all DEWALT 20V MAX* and FLEXVOLT Batteries.
  • 20X BRIGHTER LED: The DCD999 3-mode LED provides lighting in dark or confined spaces up to 20x brighter than the DEWALT DCD985.
  • EXTENDED WORK TIME WITH LED: The DCD999 features an LED spotlight mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces.
  • VERSATILITY: The DCF887 has application versatility with 3-speed settings.
  • ADDED CONTROL: The DCF887 helps prevent over-tightening fasteners with added control from Precision Drive in speed 1 setting.
  • VISIBILITY: The DCF887 creates visibility without shadows from 3 LEDs with a 20-second delay after trigger is released.
  • COMPATIBILITY: The DCB1106 6 Amp Charger is compatible with 20V MAX* batteries and FLEXVOLT 20V/60V MAX* batteries..
  • DCD999 is Tool Connect Chip Ready: Chip pocket accepts Tool Connect Chip DCE042 and connects with Tool Connect Site Manager app for easy asset management on the jobsite. (DCE042 sold separately).
Check Stock

IWISS Extractor Tool, Removal Tools for Weather Pack and Metri-Pack Connectors-3 Pack

  • Quality material: 4-claw picker is made of quality metal and plastic,strong and sturdy, Anti-rust and strong grip,U-shaped IC extractor and PLCC IC chip puller,they’re all stainless body and covered with PVC insulting shell,small size,easy to carry,The test pencil is mainly composed of plastic and colloid,can be applied for a long time..
  • Design and practicality: 4-claw design of 4-claw picker can firmly grasp small objects such as fixing screws, and it is not easy to fall.The non-slip material of the U-shaped IC extractor and the labor-saving U-shaped design can reduce hand fatigue, saving effort.The small hook design of the PLCC IC chip puller can quickly pull out and install the IC conductor without being hurt.The electric tester can test whether there is electricity to avoid electric shock..
  • Package content: 4-piece professional picking tool set. you will get a 4-claw picker ,a U-shaped IC extractor,a PLCC IC chip puller and a test pencil. It is an indispensable tool for maintenance workers, students and teachers who need experiments..
  • Universal sized: the total weight of the 4 pieces tools about 100 g. 4-claw picker each size 12 x 1 cm/ 4.8 x 0.4 inch, U-shaped extractor about 11 x 5 cm/ 4.3 x 2 inch, PLCC IC chip puller each size 10 x 5 x 1.5 cm ....
Check Stock

New Micro/Standard to Nano SIM Card Cutter

  • 【Universal Dual SIM Cutter】：Come with a Nano SIM to Micro SIM adapter, Nano SIM to Standard SIM adapter, Micro SIM to Standard SIM adapter and a....
  • 【Easy To Use】：SIM card cutter tool easy to operate, Simply insert SIM card and press fast and accurate shortcut key, without damaging existing....
  • 【High Strength And Hardness】：This SIM card cutter is made by high quality stainless steel material, that can handle cutting without any....
  • 【Wide Application】：The mini SIM card scissors tool is suitable for ordinary users, mobile phone shops, and mobile phone repair shops. It is also....
  • 【Usage】 : Press the card in the correct direction (the chip faces outwards), adjust the chip to a proper center position, slightly press the....
Check Stock

M25 x 1.5 Tap and Die Set RH Right Hand Machine M25 x 1.5mm Thread Tap and Round Die HSS M25x1.5 Threading Tool Thread Milling Tap

  • Package Include: 1pc Right hand Thread Tap M25 x 1.5,1pc Right hand Thread Die M25 x 1.5Threading Tool.
  • Tap : for Chip removal, high efficiency, debris rapidly discharged in the tank. No blocking, fast efficiency. Die: Not easily broken tooth chip fast and abrasion resistance and long service life..
  • Thread Type: Right Hand Thread M25 X 1.5 Cutting Tool.
  • My Note: And Perfect threading manufacturing process and good surface heattreatment..
Check Stock