5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock

5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole

  • The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
  • Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
  • The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
  • The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
  • Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
Check Stock

Royars Upgrade Auger Drill Bit For Planting - Heavy-Duty Garden Auger Digging Machine Hole Digger Bulb Bedding Plant Rapid Planter for 3/8 Inch Hex Drive Electric Drill, With Non-Slip Gloves, Green,2x16 in, 4x16 in

  • ...e planting auger for a drill uses two upgraded bits,a steel cast head and a flat triangle.The auger drill bit have the strength to plow deep or through difficult soil.For cordless drills,drill auger is recommended to use at least a 14V drill.they are easy and fast to use, 2 inch bit can be used with any 3/8 inch or chucking bits, 4 inch bit can be used with 1/2 inch or chucking bits,18V or larger is recommended..
  • [High quality material ]:The auger drill bit is made of the highest quality steel and the bright green paint allows you to easily find it in your back garden.The auger and drill do all of the work, and all you have to do is drop in the bulb!For vegetable plants, the 2 inch x 16″ or 4″ x 16″ attachment are perfect for digging deep planting holes.The post hole diggers give plenty of loose space and fertile soil to help transplants quickly expand their roots..
  • [Wide use]:With Royars auger bits you will not need a gardening shovel, no hand and back pain.Our bulb auger for drill allowing you to save a lot of time when planting bulbs, potted plants, vegetables, flowers, bare root trees and shrubs, turning over soil or planting boxes, mixing seeds, soil, fertilizer.It's not limited to gardening work it can also be used to mix paint and cem....
Check Stock

HILTEX 10005 Jumbo Silver & Deming Drill Bit Set, 8 Piece, 1/2' Inch Shank Industrial Large Drill Bit Set 9/16” Drill Bit to 1' Drill Bit, Metal Drill Bits for Steel, Reduced Shank Drill Press Bits

  • HIGH SPEED STEEL: These metal drill bits for steel are made of high speed stainless steel and is designed to ensure sharp and fast execution in any material leaving clean results. This 8-piece drill-bit set is capable of drilling through plastic, copper, stainless steel, and other surfaces..
  • LARGE DRILL BIT SET: Heat treated carbon steel with a black enamel coating is durable and can withstand heavy duty operation for a long tool life..
  • PRECISION DRILLING SET: Bit is precision ground with geometry of 135-degree split point for quick self-centering penetration and an accurate start that prevents walking and clears chips and particles faster..
  • DRILL PRESS BITS: Tri-flat on the shanks of drills are constructed for tighter chucking maximizing security for precise holes. This pattern allows the bits to fit securely into your power tools and helps eliminate slippage..
  • DRILL BIT SET INCLUDES: Complete set of 8 pieces come in a convenient storage case for easy storage and portability.
  • sizes include: 1/2″ Shank x 9/16″ Drill Bit, 5/8″ Drill Bit, 11/16″ Drill Bit, 3/4″ Drill Bit, 13/16″ Drill Bit, 7/8″ Drill Bit, 15/16″ Drill Bit, and 1″ Drill Bit.
Check Stock

uxcell 3/8\ 5/8\ 1/2\ 3/4\ Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Straight Flutes Round Shank Milling Cutter Tool 4pcs

  • Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
  • tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 9pcs

  • Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm.
  • tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs

  • Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
  • tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

Yoohey 16mm(5/8-Inch) HSS Twist Drill Bit, 1/2″ Straight Shank High Speed Steel Drilling Hole Tool, Reduced Shank Drill Bit for Metal Aluminum Plate Stainless Steel Wood Plastic Copper Drilling

  • ☛ Tri-flat on the shanks of drills are constructed for tighter chucking maximizing security for precise holes.
  • ☛ Twist Drill Bit with the twist design the drill bit can quickly clears them out, and leaves a clean, smooth hole..
  • ☛ Twist Drill Bit widely Use – Great drill bits for metal, wood, plastic countersink. Suitable for general building/engineering use..
  • ☛ High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • ☛ Bits are extremely heat resistant. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks.
Check Stock

QWORK Chucking Reamer Set, 8 Pcs HHS H8 Straight Shank Machine Chucking Reamer Milling Cutter, 3/4/5/6/7/8/9/10mm

  • ⭐The reamer set are made of high speed steel, high hardness and good toughness, long service life..
  • ⭐With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting..
  • ⭐This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
  • ⭐The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc.
Check Stock

NEIKO 10235B 13/16” Drill Bit for Metal, 1/2” Shank, Silver and Deming, 135° Split Point, High Speed Steel Drilling Bit for Metals, Wood, Plastics, Composite Materials

  • HSS HIGH SPEED STEEL: The high-speed steel material these bits are made of are designed to ensure sharp and fast execution in any material for clean results while making the bit long-lasting, durable, and wear resistant..
  • 135° SPLIT POINT DRILL TIP: The 135-degree split point increases cutting speed with self-centering with no pilot hole and prevents walking while clearing chips and particles faster..
  • 1/2” TRI-FLAT SHANKS: The tri-flat on the shanks of these drills are constructed for tighter chucking to maximize the hold to create precision holes..
  • CHISELED PRECISION CUT: Each of the 13/16 inch drill bits have a precision manufactured cut for accurate drilling and the all-purpose reduced shank has a 1/2-inch chiseled diameter to fit any type of drill chuck with a precise and snug fit..
  • DRILLING TYPES: This 13/16-inch silver and deming drill bit is ideal for drilling into steel, copper, aluminum, brass, wood, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon, and composite materials..
Check Stock

Wood Splitter Drill Bit, zosenda Heavy Duty Log Splitter Screw Cone, High Speed Firewood Twist Drill bit, Screw Splitting Bit Wood Breaker Wedge Drilling Woodworking Tool (38mm)

  • ... works great for splitting tough oak, hickory, walnut and so much more. Widely applicable to home, outdoor, camping, farms to save time and effort when split firewood easily..
  • STURDY AND DURABLE: Made of premium quality manganese titanium with glossy black painted finish, the professional replacement screw wood cone reamer is extra strong and durable for extended use. Perfect split drilling hand tools to makes woodworking much easier and faster.
  • BUY WITH CONFIDENCE: Our splitting wood cone drill bit is backed by a 12-month hassle-free warranty and a 30-day money-back guarantee. Please feel free to contact our customer support if you have any puzzles about our items, and we are always ready to provide our customers with 100 % satisfactory service.
Check Stock

CAT40-ER32 Collet Chuck 2.76' Gage Length 8pcs New Tool Holder Set for CNC Engraving Machine and Milling Lathe Tool

  • With good centering function, mainly clamping straight shank cutter.
  • It is often used for clamping end milling cutter, drill bit, tap, reamer, center drill and other cutting tools..
Check Stock

TTC .124 -.501 14 Pc Over/Under HSS Straight Flute RH Chucking Reamer Set

  • Type- Straight Flute Chucking Reamer Bits.
  • Application- Widely used for bore machining, installed in drilling machine, milling machine, etc.
  • Processed surface of iron, plastic, wood, copper, aluminum and other soft materials.
  • Quantity- 10 Pieces. Shank Diameter-3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm.
Check Stock