Best Chucking Reamer Tool
5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole
- Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
- Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
- Size Infor: Length of chucking reamer is 6.5 inch.
- Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
- Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stockuxcell 3/8\ 5/8\ 1/2\ 3/4\ Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Straight Flutes Round Shank Milling Cutter Tool 4pcs
- Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
- tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check StockTTC .124 -.501 14 Pc Over/Under HSS Straight Flute RH Chucking Reamer Set
- Type- Straight Flute Chucking Reamer Bits.
- Application- Widely used for bore machining, installed in drilling machine, milling machine, etc.
- Processed surface of iron, plastic, wood, copper, aluminum and other soft materials.
- Quantity- 10 Pieces. Shank Diameter-3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm.
Check StockProlinemax 14 Pc 0.124-0.501\ HSS Chucking Reamer Set Straight Shank Flute Decimal Sizes
- Sizes: 0.124'' 0.126'', 0.1885'', 0.1865'', 0.251'', 0.249'', 0.3115'', 0.3135'', 0.374'', 0.376'', 0.4365'', 0.4385'', 0.499'', 0.501''.
- Wooden Case Overall Dimension: 9-3/4''L 8''W x 1-1/4''H *Estimate Only*.
Check Stockuxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 9pcs
- Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm.
- tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stockuxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs
- Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
- tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check StockSabo Lemon Citrus Reamer Juicer 4-in-1 Multitool with Zester Channel Knife Paring Knife for Cocktail and Bar
- 4-in-1 MULTI TOOL: This multi tool features a lemon citrus reamer for juicing, a paring knife for cutting up lemons and citrus fruits, a channel knife and zester for peeling and garnishing. It is a handy bar tool for making cocktails, drinks, and garnishing along the way..
- FOOD SAFE AND DURABLE: The citrus reamer is made with hard ABS plastic and is FDA compliant food safe. The paring knife and zester is made with sharp polished stainless steel and can last for a long time..
- SAVE YOUR SHELF SPACE: For those who don’t want to have multiple tools hogging up your shelf space in your kitchen, this reamer combines multiple tools into one so you don’t have to look for each individual tool anymore..
- JUST THE RIGHT SIZE: The reamer tool is 6″ long, and the reamer head is just the right size for the average citrus fruits like lemons and oranges..
- DISHWASHER SAFE: The plastic reamer is dishwasher safe and very easy to clean..
Check Stock8pcs Reamer Set, HSS H8 Straight Shank Chucking Machine Cutter Milling Reamer Kit 3/4/5/6/7/8/9/10mm
- Type- Straight Flute Chucking Reamer Bits.
- Application- Widely used for bore machining, installed in drilling machine, milling machine, etc.
- Processed surface of iron, plastic, wood, copper, aluminum and other soft materials.
- Quantity- 10 Pieces. Shank Diameter-3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm.
Check StockReamer Set, 10Pcs HSS H7 Machine Cutter Straight Chucking Milling Reamer Kit, Reamer Metric, Milling Machine Cutter, Reamers for Metal 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm
- 0.196" diameter (+.0003"/-0") carbide tipped chucking reamer.
- 1 1/8" length of flute with 1/2" carbide length.
Check Stock17/32 HSS Hand Reamers, Spiral Flute, Right Hand Cut, Michigan Drill Series 565
- Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
- Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
- Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
- Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
- Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
Check StockADJUSTABLE EXPANDING HAND REAMER 4 PIECE SET 1/4\- 3/8\ - NEW MICRO REAMER SET
- Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
- Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
- Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
- Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
- Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
Check StockZak Designs 0204-9035 Citrus Melamine, 3.5" by 3.5", Kiwi Reamer
- GREAT EVERYDAY KITCHEN ITEM:This Zak Designs citrus reamer is great for everyday use in the kitchen..
- SAFE MATERIAL:This citrus reamer is made of 100% melamine material that is durable and long-lasting. It is BPA-free as well as dishwasher safe.
- SAVE PREP TIME: The fruit reamer juices fruits quickly and efficiently, with a comfortably rounded handle and a sharp point to easily remove seeds..
- DIY TOOL:This citrus reamer is great for lemons, limes, and other fruits when the store-bought juice just doesn’t cut it..
- FUNCTIONAL SIZE:This citrus fruit reamer has a functional size that puts a fresh twist on making your own lemon juice! Dimensions (LxWxH): 3. 5in x 3. 5in x 7. 25in..
Check StockStone Carved Whale Hand Pipe - 4 / Assorted Colors
- Made of Stainless Steel and Rosewood, The tobacco pipe cleaner cleaning Tool has elegant and classic look , easy to use and very practical. Excellent....
- 3 in 1 Tamper, Reamer & Pick tool set, Prefect for cleaning & removing ash & other residue in the stem and shank as well as the bowl chamber..
- Easy to use , durable, light weight and easy to carry. Weight: 1.25oz/35.44g..
- Compact size,Portable, Overall Size: 3.31" (L) x 0.69" (W) x 0.25" (T)..
- Package:1* (3 in 1)Tamper, Reamer & Pick tool set.
Check Stock