Categories

Best Chucking Straight Reamer

Prolinemax 14 Pc 0.124-0.501\ HSS Chucking Reamer Set Straight Shank Flute Decimal Sizes

  • Sizes: 0.124'' 0.126'', 0.1885'', 0.1865'', 0.251'', 0.249'', 0.3115'', 0.3135'', 0.374'', 0.376'', 0.4365'', 0.4385'', 0.499'', 0.501''.
  • Wooden Case Overall Dimension: 9-3/4''L 8''W x 1-1/4''H *Estimate Only*.
Check Stock

TTC .124 -.501 14 Pc Over/Under HSS Straight Flute RH Chucking Reamer Set

  • Type- Straight Flute Chucking Reamer Bits.
  • Application- Widely used for bore machining, installed in drilling machine, milling machine, etc.
  • Processed surface of iron, plastic, wood, copper, aluminum and other soft materials.
  • Quantity- 10 Pieces. Shank Diameter-3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm.
Check Stock

uxcell 3/8\ 5/8\ 1/2\ 3/4\ Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Straight Flutes Round Shank Milling Cutter Tool 4pcs

  • Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
  • tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

8pcs Reamer Set, HSS H8 Straight Shank Chucking Machine Cutter Milling Reamer Kit 3/4/5/6/7/8/9/10mm

  • Type- Straight Flute Chucking Reamer Bits.
  • Application- Widely used for bore machining, installed in drilling machine, milling machine, etc.
  • Processed surface of iron, plastic, wood, copper, aluminum and other soft materials.
  • Quantity- 10 Pieces. Shank Diameter-3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm.
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 9pcs

  • Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm.
  • tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs

  • Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
  • tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock

uxcell Hand Reamer 5mm Alloy Tool Steel H8 6 Straight Flutes Hand Milling Cutter Tool 2Pcs

  • The reamer range is 15/32 inch to 1-1/2 inch..
  • Product includes 11Pcs high speed adjustable hand reamers H4-H14..
  • The adjustable reamer is made of HSS(high speed steel) with good hardness and toughness..
  • Adjustable reamer is straight flute with straight handle..
  • The reamer is suitable for drilling machines and other machine..
Check Stock

Viking Drill and Tool 12270 CR-4SP 4 piece Set Type 50-UB Standard Flute Magnum Super Premium Car Reamer

  • 4 pc. Set Premium High Speed Steel Car Reamer Standard Flute 3-Flats on Shank.
  • Includes: 3/8, 1/2, 5/8, 3/4 straight flute reamer.
  • Reamers designed for enlarging previously formed or drilled holes.
  • 4 pc. Set, HSS Car Reamer Standard Flute 3-Flats on Shank.
Check Stock

PAGOW 1/2\ Hand Reamer, High Speed Steel H7 6 Straight Groove Reamer, Straight Flutes Hand Milling Cutter Tool

  • Premium Material: The material is low alloy steel with high hardenability and low hardenability. The reamer has the characteristics of high wear resistance, less severe cutting and less deformation..
  • Hand Reamer: Reamer for reaming holes have been drilled after processing (or reaming) on the workpiece, mainly to improve the precision of the hole, reducing its surface roughness, is finishing and semi-finishing tool for the hole..
  • Straight Flute Tool: 6 Flutes & Straight Shank. Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts..
  • Application Object: Installed in the lathe for cutting of metal tools. Straight flute hand reamers is used in ferrous metals and most nonferrous metals. Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
  • Application: Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications..
Check Stock

Reamer Set, 10Pcs HSS H7 Machine Cutter Straight Chucking Milling Reamer Kit, Reamer Metric, Milling Machine Cutter, Reamers for Metal 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm

  • 0.196" diameter (+.0003"€/-0"€) carbide tipped chucking reamer.
  • 1 1/8" length of flute with 1/2" carbide length.
Check Stock

HOUNDSBAY Bulldog Heavy-Duty Shoe Stretcher for Women | Loosens Tight Shoes with Strong Wood & Metal Construction Women’s Small / 3.5-5.5 US

  • 4 pc. Set Premium High Speed Steel Car Reamer Standard Flute 3-Flats on Shank.
  • Includes: 3/8, 1/2, 5/8, 3/4 straight flute reamer.
  • Reamers designed for enlarging previously formed or drilled holes.
  • 4 pc. Set, HSS Car Reamer Standard Flute 3-Flats on Shank.
Check Stock

HHIP 2006-0085 15/16-1-1/16\ High Speed Steel Adjustable Blade Reamer, 6 Blades, 9\ OAL, Size H

  • Straight flute reamers should be used in thru-hole applications only.
  • Blades are adjusted by loosening one nut and tightening the other.
  • Adjustable blades give the operator the ability to handle multiple hole sizes with a single tool.
  • Square end allows the user to turn the reamer by hand with an adjustable wrench or straight handle tap wrench.
Check Stock