Categories

Best Circuit Boards Design

Solder Sucker Desoldering Pump Sucking Vacuum Desoldering Pump with Teflon Tip 7.5 Solder Sucker Silicone Desoldering Tool Desoldering Pumps Black

  • Solder sucker desoldering pump made of high-quality ABS plastic with aluminum alloy, soft anti-skid handle of sucking vacuum desoldering pump,....
  • Desoldering pump is the most easy solution for removing solder, the desoldering pump designed for one-hand operation, durable and ideal for circuit....
  • The teflon nozzle of desolder pump can withstand high temperature, anti-static, heat-resistant, durable, special design, convenient for one-handed use.
  • Desoldering pump solder sucker is suitable for correcting errors on PCB boards, cleaning small components, resoldering and desoldering circuit boards,....
  • Solder pump adopts high-efficiency tin scraping method, which is easy to remove tin debris from the suction nozzle and not easy to block.
Check Stock

Square D - QO250GFICP QO 50-Amp Two-Pole GFCI Breaker

  • Compatible with QO load centers, CSED's and NQOD panel boards.
Check Stock

Genie Sequencer Board 34019R

  • 【Dimension】 -Size：100mmx75mm/3.94"x2.95"(L*W).
  • 【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers isdouble sided.
  • 【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
  • 【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
  • 【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.
Check Stock

Monolith 11 Channel (3x200 + 8x100 Watts) Multi-Channel Home Theater Power Amplifier with XLR Inputs

  • ...-channel amplifier comprised of 200 watts per Channel into 3 channels, and 100 watts per Channel into 8 channels of amplification. This rating is measured with all channels Driven across the full power bandwidth of 20Hz to 20kHz into 8-ohm loads. Additionally, there is no current limiting and there is no protection circuitry in the amplifier circuit path. Even if the speakers’ Impedance drops to a low level, The Monolith is robust enough that the current is never.
  • Made in U.S.A.: The Monolith 11x is designed, engineered, and assembled in the United States of America..
  • Dynamics: high resolution Audio delivers the best in music and movie soundtracks. You deserve an amplifier capable of delivering clear and clean audio across a wide dynamic range! With a more than 100dB signal to noise Ratio, The Monolith 11x can clearly and accurately articulate The quietest portions, the loudest portions, and everything in between..
  • Circuit boards: double sided, glass epoxy boards. Metal film resistors built to 1% tolerances. Stringent quality to ensure each circuit board functions like the last and presents the maximum in sound fidelity..
Check Stock

VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bobbin Desoldering Wick Solder Remover Wick Desolder Electronic Components - Pack of 1

  • Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!.
  • Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily.
  • The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free.
  • Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up.
  • The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze!.
Check Stock

TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering

  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively..
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas..
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time..
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards..
Check Stock

Soldering Iron Auxiliary Kit, Desoldering Pump, No-Clean Soldering Core (Width2.5mm / 0.1\

  • The main body of the desoldering pump is made of high-quality ABS material, with a non-slip sponge. The nylon nozzle can withstand high temperature, anti-static, heat-resistant, durable, special design, convenient for one-handed use..
  • High-quality desoldering braided tape is woven with fine copper wire, unique no-clean flux, easy to use, pure oxygen-free copper wire, 2.5mm / 0.1 inch width and 1.5m / 59 inch length, can help remove excess Avoid solder,Avoid short circuit， especially in hard-to-reach small areas..
  • Micro Shear Wire Cutter Pliers are made of high quality steel, with strong cutting ability, For cutting flexible cords up to 1 mm, non-slip handles, return springs, small volume。.
  • Solder wire diameter: 0.8mm, weight: about 0.35 ounces / 10 grams. Easy to carry and store, suitable for various soldering irons..
  • Suitable for correcting errors on PCB boards, cleaning small components, resoldering and desoldering circuit boards, Appliance Repair, Family DIY lovers, welding, etc..
Check Stock

Liftmaster K001A6837 Logic 4 Board Commercial OEM Genuine

  • 【Dimension】 -Size：200mmx150mm/7.87"x5.91"(L*W).
  • 【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers issingle-sided.
  • 【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
  • 【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
  • 【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.
Check Stock

QEBIDUM Mini Breadboard Solderable Protoboard for DIY Electronic, PCB Prototype Board Suit for Arduino Projects, Double Sided Perma-Proto Boards Gold-Plated Pad Easy to Solder (6 Blue Pack)

  • BOJACK high quality 6 Vaules 40 Pcs Double Sided PCB Board Prototype Kit.
  • The product contains six different sizes of circuit boards of circuit boards2*8CM,3*7CM,4*6CM,5*7CM,6*8CM,7*9CM.different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects.
  • 4 mounting holes at the corners of the board are very convenient for installing them together..
  • Using high-quality and durable glass fiber FR-4, high-quality and firm..
  • Widely used in electronic experiments and point-to-point DIY IoT projects..
Check Stock

250pcs Standoffs Nylon M2 M3 Male Female Hex Column Standoff Screws Nuts Assortment Kit for Communication Electroplating M3 Male Standoff A

  • 250pcs standoffs are made of durable environmentally friendly nylon PA66, which has stable and long-lasting acid resistance, alkali resistance, insulation and signal interference resistance..
  • The waterproof nylon spacer support is rust-proof and easy to clean. You only need to clean it with a cloth..
  • There are 4 different kits to meet your building needs, including various male or female brackets, nuts and screws..
  • Threaded standoff is very suitable for installation between the PCB circuit board and the machine board. It is very suitable for creating hot channels between chips, or creating multi-layer and multi-layer "nerd" homemade circuit board arrays..
  • They are not easy to slip when used correctly. It is very suitable for installing boards between PCB circuit boards and machines, and is widely used in communications, electroplating, medical equipment, office equipment, electronic products and other industries..
Check Stock

Square D - QO QO115PDF Plug-In Mount 15 Amp Single-Pole Dual Function (CAFCI and GFCI) Circuit Breaker

  • Compatible with QO load centers, CSED's and NQOD panel boards.
Check Stock

High Temp Tape,AIYUNNI(2 inch X 108 FT) Polyimide High Temperature Resistant Tape Silicone Adhesive - for 3D Print Bed,Soldering,Masking etc.

  • ✔High Temp Tape Dimension:50mm x 108 ft x 0.05mm (Width x Length x Thickness)It is easy to cut to any size and length you want..
  • ✔High Temperature Tape:Made of Polyimide film with silicone adhesive.for easy release and leaves no residue after peel away..
  • ✔High Temperature Resistance:They are compatible with a wide temperature range as low as -73°C (-99°F) and as high as 300°C (572°F).Polyimide polymer films provide great insulation and protect the nearby component from excessive heat from the hot air rework..
  • ✔Wide Applications:for Automotive sensor and manifolds,Insulating circuit boards,Etching,Fiber Optics Cable,High temperature powder coating,Semiconductor manufacturing,Wave soldering during circuit board assembly,3D Printing,LED strips,Electronic Repair,Solar industries,frequency conversion power,transformer etc..
  • ✔From insulating circuit boards to high-temperature powder coating, you can use AIYUNNI high temp tape in all your projects that involve harsh heat environment..
Check Stock

High Temp Tape,AIYUNNI (4 inch X 108 FT) Polyimide High Temperature Resistant Tape Silicone Adhesive - for 3D Print Bed,Soldering,Masking etc.

  • ✔High Temp Tape Dimension:100mm x 108 ft x 0.05mm (Width x Length x Thickness)It is easy to cut to any size and length you want..
  • ✔High Temperature Tape:Made of Polyimide film with silicone adhesive.for easy release and leaves no residue after peel away..
  • ✔High Temperature Resistance:They are compatible with a wide temperature range as low as -73°C (-99°F) and as high as 300°C (572°F).Polyimide polymer films provide great insulation and protect the nearby component from excessive heat from the hot air rework..
  • ✔Wide Applications:for Automotive sensor and manifolds,Insulating circuit boards,Etching,Fiber Optics Cable,High temperature powder coating,Semiconductor manufacturing,Wave soldering during circuit board assembly,3D Printing,LED strips,Electronic Repair,Solar industries,frequency conversion power,transformer etc..
  • ✔From insulating circuit boards to high-temperature powder coating, you can use AIYUNNI high temp tape in all your projects that involve harsh heat environment..
Check Stock