Categories

Best Circuit Protection Fuse Holder

ASI PTF-76-10, 5 x 20 mm PCB Fuse Holder for Printed Circuit Board Mount, 15 mm Pin Spacing, No Center Pin, 10 Amp, 250V, UL (Pack of 10)

  • ...ty&High-Temperature Resistance】-The Standard blade fuse holder made of tinned copper as a conductor to ensure good bending performance, refractory resistance and excellent electrical conductivity.Heavy duty 14AWG red power wire suitable for cars, trucks, Jeeps, boats，marine ATVs, UTVs, SUVs, etc. Adding circuit protection for car alarms,car recorder, GPS, dashboard camera, VCD player, etc..
  • 【waterproof rubber cap design】-This 14 Gauge heavy duty inline wiring harness with tight-fitting waterproof rubber cap,theses fuse link wire are not easy to fall off or enter water that can protect all standard blade fuse inside ,your car and electrical device from short circuit..
  • 【Inline Blade Fuse Holder Easy Installation】This 12V-DC ATC/ATO TC/ATO in line fuse holder has long enough wire loop Length.
  • automotive fuse holder loop length: 11.8 inches / 30cm.Firstly,cutting the inline holder 14awg looped wire about in the middle , one of the ends connect to your power source, the other to the accessory power wire that you are attempting to power..
  • 【Inline Waterproof Fuse Holder Use】- When encountering these problems in driving: cigarette lighter, wiper, headlights, air-conditioner, ABS, radio or other equipment could not function well, inline blade fus....
Check Stock

BUNKER INDUST 10-Way Fuse Box Blade Fuse Block Holder with LED Indicator for Blown Fuse Waterpoof Protection Cover for Car Boat Marine Automotive,Include 20Pcs Blade Fuses and 1Pcs DIY Sticker

  • LED INDICATOR FOR BLOWN FUSE---Each circuit has red LED warning indication.If a fuse blows,the red LED next to the problem fuse will illuminate,allowing you easily identify and replace blown fuses immediately without guessing!.
  • 1 POWER CONNECTION/10 CIRCUIT OUT---Maximum of 30 Amp per circuit & 100 Amp per panel.4-Way Blade Fuse Box can interchangeable or compatible with all automobiles and devices equipped with a 10-33 Volt DC power source..
  • FUSE PROTECTION COVER---A neat clip-on plastic cover that adds extra protection to your fuse box & fuses.Easy to operate, splash and dust-proof design..
  • HEAVY DUTY CONSTRUCTION---This fuse panel has a #10-33 stud for power feed, 250” male quick disconnect terminals, and can take an input voltage of 10 – 33 V DC..
  • PACKAGE INCLUDE---1Pcs 10-Way Fuse Box Holder,1Pcs DIY Sticker,20Pcs Blade Fuses: 5A x 2, 10A x 4, 15A x 4, 20A x 6,30Ax 2,40Ax 2. Note: This box holder is suitable for standard blade fuses(ATO/ATC).Please check the size or shape of fuse before purchasing..
Check Stock

Electop 6 Way Blade Fuse Block Fuse Box Holder, 6 Circuit Car Ato/Atc Fuse Block with LED Indicator Damp-Proof Protection Cover Sticker for Automotive Car Truck Boat Marine RV Van

  • ...istant and flame resistant. There will hardly cause any issue like produce fracture, deformation, combustion or short circuit phenomenon..
  • LED SAFETY INDICATOR - Red LED warning light will light up immediately when the corresponding fuse is blown. It is both safe and easy for you to check and replace the blown fuse..
  • PROTECTION COVER & PRE-PRINTED DIY STICKERS - Transparent plastic cover with push latch system, easy to operate, splash and dust-proof design. Adds extra protection to your fuse box & fuses. Come with multi-function stickers for DIY your specific need, convenient for examination and repair, easy to troubleshoot in outdoor..
  • WIDE APPICATION - This 6-Circuit Blade Fuse Box widely used in Cars, Buses, Tankers, Boat, Marine, Truck, SUV, Yacht, RV, Ships etc.Package includes 1 x 6-Way Blade Fuse Block with Protection Cover,4 x 20A Fuse,4 x 15A Fuse,2 x 10A Fuse,2 x 5A Fuse,4 x Screw,2 x Sticker..
Check Stock

Nilight 12V Car Add-A-Circuit Fuse Tap Adapter Mini Atm Apm Blade Fuse Holder-10 Pack, 2 Years Warranty

  • Dual-slot fuse holder: provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit.
  • Easy to use: plugs into Occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting.
  • Versatility: Use when hardwiring or adding LED strips, dash cams or other electronic devices that require direct wiring into the fuse box.
  • Superior quality: made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity.
  • Package include: 10 x Add-A-Circuit fuse holder, 10 x 15A fuse.
Check Stock

Standard Blade Fuse Holder & Fuse Kit - Muhize Fuse Tap 12V Car Add-a-circuit Fuse TAP Adapter Fuse Holder with 5 Amp Standard APR ATO ATC Blade Fuse (5 Pack)

  • PACKAGE INCLUDE - MuHize 5 x Add-A-Circuit fuse holder with heavy duty 16 gauge red color wire + 5 x 5 AMP Standard blade fuse..
  • DUAL-SLOT FUSE HOLDER - It provides one fuse holder to protect original circuit and provides a lead with the second fuse holder for new circuit..
  • EASY TO USE - Plug into an existing fuse holder. Easy to install the additional circuits without splicing or cutting..
  • WIDELY APPLICATION - MuHize assorted add a circuit Fuse Tap Adapter kit commonly fits for Standard blade fuses (rating 2Amp-20Amp), Perfect for car alarm, cell phone charger, GPS, DVD player, dash cam, etc.
  • HIGH QUALITY - 100% brand new & made from excellent materials, good electrical conductivity, and melting resistance..
Check Stock

Nilight 12V Car Add-A-Circuit Fuse Tap Adapter Mini Atm Apm Blade Fuse Holder-10 Pack 2 Years Warranty

  • Dual-slot fuse holder: provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit.
  • Easy to use: plugs into Occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting.
  • Versatility: Use when hardwiring or adding LED strips, dash cams or other electronic devices that require direct wiring into the fuse box.
  • Superior quality: made from high-quality materials, good bending performance, melting resistance and excellent electrical conductivity.
  • Package include: 10 x Add-A-Circuit fuse holder, 10 x 15A fuse.
Check Stock

MCIGICM 12 AWG Inline Fuse Holder with 30A ATC/ATO Blade Fuse 5 Pack

  • Heavy duty 12AWG wire, better protection to the circuit..
  • Wire length: 8.7 inches 12 gauge wire each side, Fuse holder dimension: 41x35x15mm.
  • Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse..
  • The rubber cap fits on tightly to protect any standard blade fuse inside..
  • Package included 5 x fuse holder & 5 x 30A blade fuse..
Check Stock

CAMWAY 10PCS Fuse Holder Blade Mini ATM/ATC Waterproof Automotive Wire Fuse Holder 14 AWG for Car Boat RV 12V 20A Fuses

  • [Wire Gauge 】: 14 AWG, added protection to the circuit.
  • [Waterproof 】 : Yes, 10 Pcs Water Resistant Fuse Holder safe and reliable, used in the circuit of automobiles,electric vehicles..
  • [The Wire Fuse Holder 】For 12V, the maximum current can be 30A.The length of the unfolded line is about 30cm.
Check Stock

MCIGICM Fuse Holder 10 Gauge Inline Fuse Holders 10 AWG Waterproof with 40 Amp Fuse 3 Pack

  • Heavy duty 10AWG wire, better protection to the circuit..
  • Wire length: 6 inches 10 gauge wire, Fuse holder dimension: 41x35x15mm.
  • Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 40A ATC/ATO blade fuse..
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside..
  • Package included 3 x 10 gauge fuse holder & 3 x 40A blade fuse..
Check Stock

HUBBELL WIRING DEVICES HBL2721 Power Entry Plug 3P4W 30A 3PH 250V L15-30P

  • ♪ COMPATIBLE FUSE :Fits for 1A 2A 3A 4A 5A 7.5A 10A 15A 25A 30A ATC/ATO blade fuse.
  • ♪ SAFETY PROTECTION: Heavy duty 16 AWG red color wire, great look and added protection to the original circuit.
  • ♪ WATERPROOF FUSE HOLDER: Unique design of dual slot tight-fitting waterproof great damp-proof and waterproof performance, safe and reliable.
  • ♪ HIGH QUALITY:Made from high quality materials high fatigue resistance, melting resistance and excellent electrical conductivity and easy to....
  • ♪ PACKAGE INCLUDE: 2 x 16 AWG ATC/ATO Inline Fuse Holder.
Check Stock

WMYCONGCONG 20 PCS 14 Gauge Blade Type Mini Size In-line Fuse Holder for Mini ATM APM Blade Fuse Automotive Use

  • Heavy duty in-line fuse holder, ideal for mini blade fuse, for car boat truck auto use, added protection to the circuit..
  • Mini size in-line fuse holder, ideal for ATM blade fuse, come with cover, protects it from dirt and muddy water..
  • 14 AWG wire, easy to automotive installation, cars, boats, motorbikes and trucks..
  • Package included: 20 pcs in-line fuse holder14AWG Wire..
Check Stock

Fuse Holder 10 Gauge - MuHize 10 AWG Inline Fuse Holder, Standard Fuse Holder 2023 Upgrade Vision, 12v Inline Fuse Holder with APR ATO ATC 40AMP Standard Fuse 4 Pack

  • PACKAGE INCLUDED - ① MuHize 4x 10 Gauge In-line Standard Blade Fuse Holder + 4x 40 AMP Standard Fuse. ② Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A,30A.
  • ③ Perfect for car suv atv truck trailer boat marine, etc..
  • EXCELLENT WATERPROOF DESIGN - Support up to 40A fuses for 12V DC. It provides a tight-fitting rubber cap with an excellent water-proof design. NEVER easy to fall off or let water in..
  • EASY TO USE - Easy to plug into an existing fuse holder without splicing or cutting. Keep your car and electric device in a safe condition..
  • WIDELY APPLICATION - MuHize assorted in-line fuse holder kit commonly fits for standard blade fuses (rating 1Amp-30Amp), Perfect for Car Truck Boat, etc. They ensure a circuit to not overload in any extreme operating conditions or in the event of any short circuit..
  • HEAVY-DUTY - 10AWG wire, great look and added protection to the circuit. 100% brand new & made from excellent materials, good electrical conductivity, and melting resistance..
Check Stock

3 Types 12V Add-a-Circuit Adapter & Fuse Kit - Muhize Fuse Tap Fuse Holder with Standard Mini and Low Profile TAP Blade Fuse for Cars Trucks Boats (9 Pack)

  • PACKAGE INCLUDE - MuHize 3x Low profile mini fuse adapter with 5 Amp low profile mini blade fuses.
  • MuHize 3x Mini fuse adapter with 15 Amp mini blade fuses.
  • MuHize 3x Standard fuse adapter with 5 Amp standard blade fuses..
  • DUAL-SLOT FUSE HOLDER - It provides one fuse holder to protect original circuit and provides a lead with the second fuse holder for new circuit..
  • EASY TO USE - Plug into an existing fuse holder. Easy to install the additional circuits without splicing or cutting..
  • WIDELY APPLICATION - MuHize assorted add a circuit Fuse Tap Adapter kit commonly fits for blade fuses (rating 2Amp-40Amp). 3 Types: Low profile mini fuse adapter fits for Korean Cars.
  • Mini fuse adapter fits for Japan and US Cars.
  • Standard fuse adapter fits for European Cars. Perfect for car alarm, cell phone charger, GPS, DVD player, dash cam, etc.
  • HIGH QUALITY - 100% brand new & made from excellent materials, good electrical conductivity, and melting resistance..
Check Stock