Categories

Best Clamp Butt Welded End

RIO Fly Fishing Trout 7 Sinking 3Ips Fishing Tackle Clear

  • RIO's Trout VersiLeaders are designed for the fly fisher who needs a quick-change option for converting a floating line to a sink tip.
  • Each VeriLeader is tapered for the best in performance and has a 12lb nylon core coated in PVC.
  • A neat, bullet-proof welded loop at the butt end allows for fast rigging.
Check Stock

Military Rucksack Medium Alice Pack Army Backpack with Frame and Alice Butt Pack

  • The Main Compartment of Military ALICE Backpack closes by means of a drawstring secured by a plastic cord clamp. A radio pocket is located against the back on the inside. The size of the pack may be decreased for smaller loads by means of three para-cord ties, stitched to the inside bottom of the pack, and three metal D-rings located directly below the internal radio pocket. It can be used with or without the LC-1 Field Pack Frame..
  • Army ALICE Butt Pack Features 1000D Material with extra interior lining For Long-Lasting Resilience and Measures 9"x9.5"x5".The MOLLE Webbing PALS Butt Pack has a front flap closure with buckles, waterproof inner compartment with drawstring closure. Color:Olive Drab..
  • ALICE Pack System Belt, Individual Equipment ,The Individual Equipment Belt was changed by eliminating the center row of eyelets and replacing the single-end hook adjustments at each end with double-end hook adjustments which engaged in the two outside rows of eyelets for size adjustment. Design as furnished for evaluation with two (one upper and one lower) rows of eyelets and aluminum quick-release buckle. Also with new clinch-buckle size adjustment system. SIZE 120x55mm..
  • ALICE Rucksack System padded and easily adjustable shoulder Straps help relieve pre....
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

WONGWAI 4 PCS 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve, Stainless Steel Exhaust Clamp for Exhausts, Mufflers, Downpipes

  • HIGH-QUALITY MATERIAL - Made of premium 304 stainless steel, our exhaust clamp band sleeve has great corrosion resistance and not easy to rust. After many tests, they can give a good performance in the exhaust systems, and high quality in durability and reliability..
  • PERFECT SEALING CAPABILITY - These butt joint exhaust band clamps have been adopted high-strength fastening parts, providing the real leakage-free sealing capability. It is perfect for 2.5 inches exhaust pipes or mufflers..
  • 360 DEGREE FULL CLAMPING - Designed with an entire 360-degree full clamping area, the stainless steel exhaust clamp has an overall 360-degree clamping force without distorting exhaust pipe, muffler, or exhaust tubing in the exhaust system..
  • WIDE APPLICATIONS - These butt joint band clamps have removable and reusable bolts and nuts, which makes them durable and sturdy. They can be easily installed accurately without welding. They are suitable for exhausts, mufflers, downpipes, headers and manifolds..
  • MONEYBACK GUARANTEE - WONGWAI promises to provide you with a refund if you find any issue with our products in 30 days so that you can rest assured that you make the right choice. If you have any questions regarding our butt joint exhaust band clamp sleeve, please feel free to....
Check Stock

Scientific Anglers WF-8-S Type LLL Frequency Sink Tip Line 85-Feet

  • TAPERED SINKING LEADER: RIO's Trout VersiLeaders are designed for the fly fisher who needs a quick-change option for converting a floating line to a....
  • QUALITY DESIGN: Each VersiLeader is tapered for the best in performance and has a 12lb nylon core coated in PVC. A neat welded loop at the butt end....
  • SINK RATES: There are two length options available, 7ft and 12ft, with the following sink rates 1.5 ips (clear loop), 3 ips (green loop), 4 ips (red....
  • FRESHWATER FLY LINES: We have a fantastic selection of the highest quality freshwater fly lines, designed to optimize your time on the water. All of....
  • PASSION & INNOVATION: For more than 20 years, RIO has demonstrated passion, innovation and a pure love for the sport through its development of the....
Check Stock

4" U Bolt Saddle Exhaust Clamp - Zinc Plated Flat Band

  • 4 inch U bolt Clamp with Welded Saddle is made in Zinc-Plated Steel.
  • This double-edge Clamp provides superior strength and sealing-ability, Zinc plated for corrosion resistance provides longer life.
  • Heavy duty welded saddle design for extra strength and Flat band for 360-degree seal.
  • Flat Band prohibiting pipe distortion and damaged, better protect pipe ends.
  • Tested to the highest heavy duty standards to having equal performance with OE brand in durability, safety and reliability.
Check Stock

Rio Trout Versileader Tapered Sinking Leaders Freshwater Fly Line 12lb Core 7ft / 7ips

  • TAPERED SINKING LEADER: RIO's Trout VersiLeaders are designed for the fly fisher who needs a quick-change option for converting a floating line to a....
  • QUALITY DESIGN: Each VersiLeader is tapered for the best in performance and has a 12lb nylon core coated in PVC. A neat welded loop at the butt end....
  • SINK RATES: There are two length options available, 7ft and 12ft, with the following sink rates 1.5 ips (clear loop), 3 ips (green loop), 4 ips (red....
  • FRESHWATER FLY LINES: We have a fantastic selection of the highest quality freshwater fly lines, designed to optimize your time on the water. All of....
  • PASSION & INNOVATION: For more than 20 years, RIO has demonstrated passion, innovation and a pure love for the sport through its development of the....
Check Stock

Taylor Made Products 9118 Cocktail Boat Flag (12\ x 18\)

  • ...ckage- two years warranty offered by Affordura US ensign. The package contains 1x 12x 18 American yacht ensign flag, 2x boat flag clips, 2x extra set of boat flag kits just in case or use for any other marine boat flag. Make sure US yacht ensign set is completely dry before storing..
  • Patent design- the flag tabs are welded in place instead of pressed into the slot of the clamp, exclusive for Affordura boat flag clips patent design. Will stand up to high winds and travel on the water for your boat..
  • Entirely adjustable- Easy to install without any tools needed. Comes with built in key to tighten or loosen, just clamp and go, suitable for any flag pole, stern, bimini, boat top between 0.8-1.4 inch..
  • Durable material- 100% Polyester marine flags for boats, resists fading and dries quickly. Individually embroidered stars, 4 rows of stitching on the end and double brass grommets made for harsh marine environment..
  • Fly proudly- The yacht ensign flag is now flown as a matter of custom as an alternative to the national ensign by recreational craft sailing in U.S. territorial waters, it also tells you which way the wind is blowing. EVERY US Boater needs at least one of these to fly. Boat cabin flag size should be about one inch for each foot of overall boat lengt....
Check Stock

Strong Hand Tools CPL45 , Pipe Fit-Up Clamp, Pipe Welding Alignment Tools (Pipe Diameter Capacity: 2″ ~ 4″ (50~100 mm))

  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding. Easy-to-use design for the rapid, repeated loading and unloading of work pieces..
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding..
  • Easy-to-Use design for the rapid, repeated loading and unloading of workpieces..
Check Stock

Pack of 2 Butt Joint Narrow Band Exhaust Seal Clamp Muffler Clamp Band Stainless Steel Connection for Cars (2IN)

  • The band clamp is a wide band of metal, usually stainless steel, wrapped around the exhaust pipe joint. Our products are preformed rings and are now more commonly used in high-end aftermarket car systems that use slip fit because they are relatively inexpensive and can be reused without damaging the pipe..
  • The butt strap clamp is a simple and effective way to connect car system components such as pipes, mufflers and catalytic converters. Offering unique sealing and high clamping loads, it does not distort your exhaust components and provides flexible removal and repair..
  • Distribute the clamping force evenly over the entire 360° range to prevent leakage and control material deformation. It is easy to install or disassemble with one bolt, saving time and effort. T-304 strip stainless steel and carbon steel galvanized hardware..
  • Available in a wide range of styles and sizes. You would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight..
  • Maximum Diameter: 2", Band Width: 1 1/4" (1.25").
Check Stock

3/4\ Butt Stair Nosing Unfinished RED Oak (3 FT Long)

  • 3/4" BUTT STAIR NOSING UNFINISHED RED OAK.
  • 3 3/8" TOTAL WIDTH, 3/4" BUTT END HEIGHT, 3/10" NOSE OVERLAP, 1/4" WIDE 1/3" DEEP SLOT AT END OF BUTT EDGE.
  • MADE IN USA BY RANDALL MANUFACTURING PART NUMBER W-1638-U.
Check Stock

SYKRSS 2.0' Stainless Steel Butt Joint Exhaust Seal Band Clamp

  • Universal butt joint exhaust clamp fit for 2.0" OD pipe to 2.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, It is removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Full clamping area to create the best seal available without distorting pipe, muffler inlets, outlets, elbow joints, flex tubing and other system connections.
  • The butt joint exhaust clamp is made in stainless steel material, not easy to rust, corrosion resistance.
  • SYKRSS is the responsible brand, strive to offer a high-quality product and service. if you encounter any problems during the installation process, feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

Butt Welding Clamps, Sturdy Durable 16pcs Butt Welding Clamps ,for Sheet Metal Auto Car Truck Door Skin Panel, for Precision Butt Welding and Edge to Edge Welding(16pcs)

  • ...ty and durable:This set of clips has excellent performance in precision butt welding and edge-to-edge welding. The butt welding tongs are made of galvanized steel, rust-proof, heat-resistant and durable. The smooth metal surface prevents rust, is not easy to deform, and has a long service life..
  • Professional welding clamp tools:Each welding square tool tube clamp can extend the clamp block, leaving a 0.040 inch (1cm) gap between the panel and the edge welding. Suitable for straight or curved plates. The minimum gap of the welding plate is about 1 mm, which can be adjusted to a farther position as needed..
  • Good performance: These clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Professional use:Sheet metal welding tongs are designed for welding operations. Very suitable for welding cracked metal floors, automotive sheet metal surfaces, door skins or prefabricated panels assembled in re-skinning projects. These clips can fix panels of any shape anywhere..
  • Easy to use:After spot welding the two panels together, remove the wing nut release device and toggle, just remove the fixture from the work before the fina....
Check Stock