Categories

Best Clamp Connector

abcGoodefg 4 Sets Brass Garden Hose Mender Female and Male Hose Connector 5/8 Hose Fittings Garden Hose Adapter Water Hose End Replacement Repair Kit with Clamp and Rubber Gaskets

  • Standard 5/8″ hose connection — The brass garden hose mender’s diameter is approx. 14mm/ 0.56 inch, fit for 5/8 inch hose for easily insert and remove hoses, please select the corresponding size before placing an order. Brass connector with the stainless tightening clamp you can make it tightly as you want. Work with your garden hose, sprayers, nozzle, etc..
  • Wide applications — This hose end replacement kit can be use to garden hose mender, end hoses male mender, end hoses female mender, hose repair mender. You can use them to repair or replace broken female or male hose connector, connect to male or female quick connector to lengthen the hose, use with water faucet, etc..
  • Easy to Use — This garden hose adapter use to repair and connect the water hose end. Easy to connect and disconnect when replacing the end of the garden hose, quick and easy, no additional tools are required, just by hand, suitable for using with garden hose, pipe tubing, and water equipment system, hose repair mender, etc..
  • Sturdy material — These hose fittings are made of brass, which is rustproof, corrosion resistance and durable, and the stainless steel hoop clamp can avoid garden hose leakage..
  • Packge Included — 4 Male Mender + 4 Female Me....
Check Stock

Hourleey Garden Hose Repair Fittings, Zinc and Aluminum Male and Female Hose End Water Hose Repair Connector, 4 Pack

  • Package include: 2 pack female thread end hose repair connector with zinc clamp, 2 pack male thread end hose repair connector with zinc clamp.
  • Material: female and male hose repair connectors are made of high quality aluminum, the clamps are made of zinc, the screws are made of stainless steel.
  • Easy to use: easy to connect and disconnect, Hourleey repair connector can be use to repair and connect the water hose end..
  • Widely use: Fit for 3/4" or 5/8 hose fittings, the screws will not strip when tightened..
  • Good Service: If any problem, please feel free to contact us, Prince Team offer replacement and full refund services..
Check Stock

REGNHLIF Zinc and Brass Male Clamp Coupling,Fits 3/4" or 5/8" Garden Hose Repair Fitting

  • End Male Hose Connector/Replacement/Mender For 5/8 inch or 3/4 inch hoses.
  • Brass Male Coupling, Zinc clamp and stainless steel screws.
  • Easy to use and reliable,Work perfectly with any standard garden hose.
  • Made with precision process, no leaking and durable, reusable and easy to install.
  • Package include:1 Pack Hose Connector Kit (1 Male coupling + 1 clamp + 2 screws).
Check Stock

LotFancy Battery Terminal Connectors Tinned Brass 4PCS Quick Release Disconnect Car Battery Terminal 4 Way Positive Negative for SAE/JIS Type A Posts

  • 【4 Way Battery Terminal】Pack of 4. This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
  • 【Dimension】For wires diameters 4.1 – 8.2mm (AWG gauges 0 – 16) or section 13.5 – 53.5mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
  • 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
  • 【Sturdy & Durable】The battery terminals are made of tinned brass, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss.
  • 【Wide Application】These battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Ju....
Check Stock

LotFancy Battery Terminal Connectors, Tinned Brass, 2PCS Quick Release Disconnect Car Battery Terminal, Positive Negative for SAE/JIS Type A Posts

  • 【4 Way Battery Terminal】This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
  • 【Dimension】For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm. Minimum wire size: 16mm (5/8 inch ). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
  • 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
  • 【Sturdy & Durable】The battery terminals are made of tinned brass. Tinned brass is brass coated by a base alloy such as solder better known as tin. It strengthens the brass's natural properties, making it better equipped to resist humidity, high temperatures and wet environments.
  • 【Wide Application】These battery terminal connectors can be used for ....
Check Stock

5/8' Aluminium Garden Hose Repair Connector with Stainless Steel Clamps, Male and Female Garden Hose Fittings, Mender End Repair Kit,Water Hose End Mender,Fit for 5/8' Garden Water Hose Fitting, 4 Set

  • Garden Hose Repair Connector：4 sets female and male hose repair connector with clamp, 8pcs Stainless steel clamp，8 extra Garden Hose Washer Rubbers.Fit for 5/8" hose fittings.Pipe joint diameter is 16-16.5mm, Standard 5/8" hose inner diameter is about 15.8-17mm, Our product is a little smaller than stand size which make it easy to insert or pull out 5/8" hose.with the stainless tightening clamp you can make it tightly as you want..
  • Aluminium Garden Hose Mender End Repair Kit : Female and male hose repair connectors are made of high quality aluminum, he surface oxidized to copper-like color，the clamps are made of stainless steel.Heavy-duty Aluminum metal construction with rust proof,Please note our connector are made of Aluminum , not brass.Our product Completely lead-free..
  • Easy to use : Easy to connect and disconnect, use to repair and connect the water hose end.Easy to install these garden hose end replacement by hands, 8 pieces stainless steel tightening clamp with rust proof for you to use or replace, effectively avoid leakage, it's good choice for your backup tool of hose mender..
  • Widely Application: These garden hose end replacement has a wide range of applications such as outdoor faucet, garden hose, hose splitter, filter, sprayer, sprinkle....
Check Stock

Koehler Enterprises KEDIS220 220 Piece Hose Clamp Set in Mountable Rack , Red

  • Wide Applicability : Hose finisher clamp is apply to the flexible hose tube. This is not only a hose clamp, but also a hose connector..
  • Repeatable Use : There is a captive screw on the hose clamp, you can disassemble and install it easily, and can also be reused..
  • Suitable for fuel hose, oil hose, diesel hose, water hose and so on, perfect to apply in automotive..
  • Hex hose finisher can be reused and recycle if you do not want them to stay in the original place..
  • Package Included: 4 x Car Hose Finisher Clamp Adapter.
Check Stock

Clamp Type Connector Cable Connector Clamp Cable Connector for Metallic Conduit Protect Cables Silver (4, 3/4 Inch)

  • Multi-quantity: there are 8 pieces cable connectors in the package, enough quantity to meet your replacement and using needs in daily work, better cooperate with you to finish work.
  • Durable material: wire connectors are made of zinc alloy material, not easy to rust, durable and practical, can be applied for a long time after heat treatment, and with the corrosion-resistant zinc die-cast structure.
  • Sturdy metal structure: cable connector kit has metal structure, which ensures mechanical protection of the raceway, protects your wires from damage, and prevents hazards of leakage, safe and sturdy.
  • Screw straps design: the 650XY2 clamp type connector has 2 pieces screw straps and flexible conduit FTGS.
  • It is the service entrance cable fittings but does not the metallic cable.
  • Cable size measures 14 awg, and the knockout is about 1/2 inches.
  • Size information: cable connector clamp is about 1/2 inches, before purchasing, pay attention to whether it meets your daily needs for work and cooperation, in order to prevent wrong purchase.
Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

Aluminium Garden Hose Repair Connector with Stainless Steel Clamps, Male and Female Garden Hose Fittings, Mender End Repair Kit ，Water Hose End Mender，Fit for 3/4" Garden Hose Fitting, 2 Set

  • Garden Hose Repair Connector：2 sets female and male hose repair connector with clamp, 4 pcs Stainless steel clamp，4 extra Garden Hose Washer Rubbers.Fit for 3/4″ hose fittings.
  • Aluminium Garden Hose Mender End Repair Kit : Female and male hose repair connectors are made of high quality aluminum, he surface oxidized to copper-like color，the clamps are made of stainless steel.Heavy-duty Aluminum metal construction with rust proof,Please note our connector are made of Aluminum , not brass.Our product Completely lead-free.
  • Easy to use : Easy to connect and disconnect, use to repair and connect the water hose end.Easy to install these garden hose end replacement by hands, 4 pieces stainless steel tightening clamp with rust proof for you to use or replace, effectively avoid leakage, it’s good choice for your backup tool of hose mender..
  • Widely Application: These garden hose end replacement has a wide range of applications such as outdoor faucet, garden hose, hose splitter, filter, sprayer, sprinkler, nozzle, timer, etc. It will help you solve some problems about repair as long as the size matches.
  • An ideal hose repair part, you can easily place an order. If you have any questions, please feel free to contact us. We will help you solve the pro....
Check Stock

Hantek CC-65 AC/DC Current Clamp Meter Transducer for Digital Multimeter Oscilloscope with BNC Type Connector

  • Hantek amp clamp AC/DC frequency range: Up to 20 kHz.
  • hantek cc65 Effective Measurement Range: 20mA to 65A DC.
  • The oscilloscope current probe is with Accurate circuit measurement and suitable for DSO.
  • Hantek CC-65 amp clamp is Friendly in use: turn on, clamp it over a conductor, and get a reading.
  • The current probe is with Output: BNC connector.
Check Stock

UPF 50+ Chair Umbrella with Clamp Adjustable,Beach Umbrella,Patio Umbrellas,Use for Outdoor Patio,Golf Cart,Stroller,Bleacher,61 x 43 inches

  • UPF 50+ PROTECTION. Offers UPF 50+ protection to help keep skin safe from 99.5% of UVA and UVB rays,blue coating layer fabric reflects heat to cool....
  • RUGGED COVER AND DURABLE CONNECTOR. The rugged canopy cover won’t rip or tear.
  • a heavy-duty universal clamp connects to square and tubular surfaces....
  • ADJUSTABLE ALL POSITION CLAMP. Universal clamp installed enables to connect the square and tubular surfaces of armrest or support of the chair. Clamp....
  • STABLE AND STURDY STRUCTURE.The ribs We use metal links to make it stronger, The canopy of this adjustable clamp umbrella is kite-shape like, creating....
  • EASY TRANSPORT FOR EASY PROTECTION. Conveniently folds into a compact carrying case, weighing only 3.4 pounds, so it can be taken anywhere. When....
Check Stock

2021 LightningMTS 275 AC/DC TIG with Pulse/MIG/Stick Welder Dual Voltage 110v/220v

  • 12 ft. Everlast 18 Series Water Cooled TIG torch with series 35 DINSE-style connector.
  • 10 ft. Series 36 MIG torch with Euro style quick connect fitting.
  • Stick electrode holder with 10 ft. cable and 35 series DINSE-style connector.
  • Work clamp with cable 10 ft. cable and 35 series DINSE-style connector.
  • Spare consumable starter kit (does not include tungsten).
Check Stock