Pneumatic Clamp,Pneumatic Clamp G1/8 Professional Cylinder Pneumatic Hold Down Clamp HS 10101‑A GH101A for Home Decoration
- 【Improve Production Efficiency】The cylinder pneumatic hold down clamp can shorten test time and improve production efficiency..
- 【Realize Automatic Control】Our cylinder pneumatic hold down clamp is easy to operate and easy to implement automatic control..
- 【Iron Material】This pneumatic clamp is made of high quality iron material, sturdy, durable and, exquisite workmanship, beautiful appearance..
- 【Ensure Machining Accuracy】This productt can reduce the labor of workers, help ensure workpiece machining accuracy..
- 【Wide Range of Uses】It is widely used in home decoration, equipment installation, mechanical operation, welding, mold and other industries..
Check StockPETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers, Mechanical Disc Brakes for MTB, Mountain Bike, E-bike and Electric Bike 2PCS Front/Rear Red
- 【Braking System】:Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way brake system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
- 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
- 【Upgrade Design】: HB-100 uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the line pulling hydraulic brake of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
- 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
- 【Note】: Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or scrap the oil disc.
Check StockPETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers Mechanical Disc Brakes for MTB Mountain Bike E-bike and Electric Bike 2PCS Front/Rear Gold
- ...o brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
- 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
- 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
- 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
- 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or scrap the oil disc.
Check StockEnkelbruke Pneumatic Clamp, GH-12130 Professional Cylinder Pneumatic Hold Down Clamp, 230kg Clamping Force
- FUNCTIONS -- The hold down clamp can not only reduce the intensity of labor of workers, but also help ensure the machining accuracy of the workpiece..
- ESSENTIAL TOOL -- The toggle clamp is a essential clamping tool that can help achieve automatic control..
- HIGH EFFICIENCY -- The cylinder pneumatic clamp can largely shorten the test time and improve the production efficiency..
- 230kg CLAMPING FORCE -- With a total length of 300mm and a maximum clamping force of 230 kg, the clamp helps to ensure the machining accuracy of the workpiece.
- APPLICATION -- This pneumatic lever clamp is used for mass production, and the workpiece station that needs to be positioned and clamped can be used. It is commonly used in stations such as welding, gages, and molds..
Check StockMySit Gas Lift Cylinder Removal Tools 28mm/1.1-Inch, Removal Tools Sets for Replace Office Chair Cylinder, Fix Sinking Office Chair Stainless Steel Chair Saver for Stop Sinking - 2 Pieces
- DURABLE CHAIR CYLINDER REMOVAL TOOLS KIT -- Mysit adjustable office chair cylinder removal tools are made of durable stainless steel. Package inludes 2pcs stainless steel cylinder clamp shafts, 2pcs long bolts, 1pc L wrench..
- REPLACE GAS LIFT CYLINDER USE -- No other tools required, using this tool set to remove/replace many years sinking gas cylinder, let disassemble easily to save your strength and time..
- NOTICE FOR CYLINDER REPLACEMENT: 1.Install the top ring collars on cylinder(using short screws), make sure this ring CAN slide along the cylinder.
- 2.Install the below ring collars on cylinder(using short screws), make sure this below ring tightly enough and CANNOT slide.
- 3.Install and tighten 2 long screws on below ring ALTERNATELY, to avoid the below rings tilt and cannot disassembly..
- UNIVERSAL SIZE 28MM -- Office chair stainless steel removal tool kit fits for most office chairs (stools, executive chairs, office chairs, gaming chairs) with a cylinder within 1.1"(28mm) diameter..
- FIX SINKING OFFICE CHAIR USE -- Universal size fits all height adjusting cylinder chairs, office chair saver for stop sinking can control the height of the seat, prevent repeated sinking, the office chair replacement parts can hold weight up to 600 pounds. It takes few minu....
Check StockPneumatic Clamp, 300mm SC3250 100PSI Professional Professional Pneumatic Hold Down Clamp
- SPECS-- Length: 300mm / 11.8in, Air Inlet Interface: M10, Cylinder Specification: SC32*50, Maximum Working Pressure: 9Kgf/cm²(0.9mpa)100PSI, Movable Distance of Clamping Rod: 60mm / 2.3in, Clamp Screw: M8.
- ADVANTAGES-- The pneumatic clamp helps ensure the machining accuracy of the workpiece, and can reduce the intensity of labor of workers.
- MORE-- Base Fixing Screw: M6 * 4pcs, Base Fixed Screw Spacing: right and left(19mm / 0.7in), up and down(31.8mm / 1.2in, Package Weight: Approx.1084g.
- EASY TO USE-- The 300mm professional hold down clamp has simple operation, and is easy to achieve automatic control.
- SCOPE OF USE-- This 100psi pneumatic clamp can be used in welding, fixture, mold and other positions.
Check StockWheel Clamp Lock Universal Security Tire Lock Anti Theft Locking Devices Heavy Duty Wheel Lock Fit for Trailers Golf Cart Boats SUV ATVs Motorcycles
- ... 【Qualitative Materials】This universal wheel locks is made of high strength steel plate. The surface of wheel clamp boot tire lock is soft PVC coated, which will not damage your car wheel. Lock core is crescent shaped design, its anti-theft performance is stronger than other general lock cylinder. The lock position has waterproof cap to protect lock core..
- 【Highly Visible】Red and yellow colors make the tire clamp highly bright and striking, it's ideal for maximum visibility in both day and night and protects your car security effectively..
- 【Easy to Install】Open the car tire lock and install it on your car wheel, adjust it to the appropriate hole, and push the lock cylinder..
- 【Support Services】Each car wheel lock set includes 1 pcs Lock and 3 pcs keys. We do not keep any spare keys. Please keep the wheel lock attached keys safe. If you have any questions about the Trailer wheel locks, please contact us..
Check StockBTSHUB Inductive Engine Timing Light, Digital Ignition 12V Light Gun Spark Checker with Advance Probe, Xenon Inductive with RPM Readout for Gasoline Car Motorcycle Marine
- 【FIT FOR】Adapts to all kinds of 12V battery for automobiles, motorcycles, ATVs, personal watercraft, RVs, boats.
- 【ENIGNE IGNTION SPARK TESTER】Use this ignition spark tester to check the condition of the ignition system at each cylinder without going to expensive mechanics.The spark tester connects between the spark plug and spark plug wire in seconds to troubleshoot dirty spark plug connections, defective points and bad cables or connections..
- 【EASY TO USE】Super bright Xenon flash, high vis LED display: LCD Display shows RPM and DEGREE. The sensor clip is red and black to distinguish positive and negative poles, easy to use and more secure. It's sliding clamp-on inductive pick-up, for easy and safe hookup..
- 【ERGONMIC PISTOL GRIP DESIGN】Ergonomically designed with comfortable press keys, great Press feeling and easy operation. And the high quality makes it be worn hardly..
- 【INATRUCTION】The power supply is 12V with red connecting to positive and black to negative. The high voltage wire induction clamp is clamped on the high voltage line of cylinder with the arrow on the induction clamp pointing to the direction of the spark plug for normal working..
Check Stock190003 Tension Control Clamp Kit Replacement Compatible with Pentair Pool and Spa Filter for Pentair FNS Series Quad DE Series Filter Pumps 23-1/4 Length Black
- ...8 100 60 80, Pentair series 180008, 160340, 160301. (Please refer to your part number or dealer before purchasing to ensure compatibility.).
- Pentair Pool Filter -- Fits Clean & Clear Plus pool and spa filter. Also fits for Pentair FNS Plus, Quad pool and spa D.E. filters. Include: Tension Clamp, Washer, Spring Cylinder Nut Assembly. Measures 23-1/4-inch length by 2-1/4-inch height by 22-1/4-inch width..
- High Quality Materials -- The pentair filter pool clamp made of high quality stainless steel material, can withstand the wind and the sun, prevent leak and premature failure to ensure it can work for a long time. It has been strictly inspected and tested by the manufacturer before leaving the factory,to meet or exceed OEM standards..
- Solve Problems -- 190003 tension control clamp kit can solve filter clamp starts to get old and the threads will begin to strip, if the clamp breaks the filter tank top will explode off. Replace the filter clamp, you can protect your filter, will not cause you too much loss..
- Features -- 190003 tension control clamp assembly easy to install, easy to tighten the knob. The filter clamp kit is used for cleaning and maintenance of a cartridge or DE filter, keeps a tight seal between the two filter halves, replacing the clam....
Check StockFront Brake Wheel Cylinders Shoes Kit for Honda TRX300 TRX300FW Fourtrax 300 4x4 1988-2000 (Left&Right),OEM# 45330-HC5-006 45310-HC5-006 06450-HC5-900
- 【Fitment】Fit for Honda ATV Fourtrax 300 4x4 TRX300FW 1988-2000 (Excpet 2x4 Editon).
- 【Material & Feature】This high grade brake wheel cylinder is made with EPDM rubber cups, cast iron and aluminum.100% non-asbestos friction formulations can prolong brake shoes wear and stabilize braking performance..
- 【OEM#】45330-HC5-006 45310-HC5-006 0645-0HC5900. Exact as original, please check your bike OEM number before you make an order..
- 【Package】1 × Left Brake Wheel Cylinder A, 1 ×Left Brake Wheel Cylinder B, 1 ×Right Brake Wheel Cylinder A, 1 ×Right Brake Wheel Cylinder B, 2 ×Banjo Screw, 4 × Washer, 4×Brake Shoe, 4×Brake Spring , 4×Shoe Clamp Spring , 4×Pin Tension, 4×Pin Cap, 4×Pin Seal, 2×Adjusting Hole Plug.
- 【Service】JAVIK offer 24 hours customer service and 1 year warran_ty. Please feel free to message if you meet any problem..
Check StockFix Sinking Office Chair Gadget Fixing Drafting Chair Cylinder Sinking Stopper Adjustable Office Chair Gas Lift Cylinder Holder.
- Facing Office Chair Sinking Problem ? : Have you ever been meet this situation of siting on office chair during working or reading or game playing,....
- Save your time and money to buy a new piston and pay a expert to fix it..
- Stainless Steel Material:Never Worry Breaking when compare to others cheap plastic chair cylinder holder on market..
- Chair Fixing Height Freely :Combine and adjust your chair to your most comfortable height,then apply this gadget on..
- Not Selling with Chair and Cylinder. Just a little metal Clamp.Simple and Effective Design to solve your chair sinking issues.fit for Chair Cylinder....
Check StockDockMoor Fix Sinking Office Chair Upgrade 304 Stainless Steel with Hexagon Wrench Adjustable Height Chair Saver kit with Leather Pads
- Upgraded office chair saver for stop sinking is made of 304 stainless steel, which has strong load-bearing capacity, more practical and effective, not easy to break or crack compared to other plastic products..
- Fit size for gas cylinder charirs -- Universal suitable for most office chairs, the cylinder diameter is within 25-28mm.(0.98-1.1inch)..
- Office chair buddy -- The height of the chair can be adjusted and fixed according to your needs, bringing a comfortable seating experience to you..
- Upgraded chair sinking stopper -- our sinking clamp also made with 304 stainless steel, will not rust in daily use, blue solicone pads, the friction is greater and it fits closely with the cylinder to prevent the seat from sinking, Also prevents unsightly marks from damaging the chair..
- Easy to install -- Come with an office chair sink stop and a free hexagon wrench to tighten the screws, No need to disassemble the chair or cylinder, a safe and adjustable chair fix replacement,save $200 for a new chair..
Check StockPneumatic Clamps Pneumatic Clamp 300mm GH-12130 Professional Cylinder Pneumatic Hold Down Clamp
- ...pacity reference mechanics and dynamics design and the overall structure is ergonomic that the thin, compact fixture is suitable for narrow working spaces. With a total length of 300mm and a maximum clamping force of 230 kg,the Clamp helps to ensure the machining accuracy of the workpiece..
- 【operate easily】 This Cylinder Pneumatic Clamp provides a smoother operation during repeated clamping operations than manual clamps. The intake port size is M10.The maximum working pressure is 9Kgf / cm2 (0.9mpa) 100PSI, and the movable distance of the clamping rod is 60mm / 2.3in, The Pneumatic Clamping Tool operate easily, and it is easy to realize automatic control..
- 【Improve efficiency】This Pneumatic Hold Down Clamp is used for positioning, clamping workpiece station. It is powered by compressed air and has the characteristics of labor saving, energy saving and environmental protection. It can shorten test time,and improve production efficiency which reduce labor intensity of workers.Pneumatic clamp is easy to operate and easy to implement automatic control..
- 【Application】 This Pneumatic Lever Clamp is used for mass production, and the workpiece station that needs to be positioned and clamped can be used. It is commonly used in stations such as weldin....
Check Stock