Categories

Best Clamp on

Fulton Spring Clamp Pliers with 13 Spring Clamps and Hip Clip Made in the USA

  • If you have ever attempted to firmly secure and clamp mitered corners then you know what kind of a challenge it can be to say the least. You could always try those large, cumbersome and very expensive parallel clamps to try and work each corner just right to hold your mitered corners together. That too can be extremely challenging and not to mention very costly..
  • The Fulton Miter Spring Clamps are the ideal and cost effective way to quickly and easily clamp mitered corners without all of the hassle you typically have with other clamps. The Spring Miter Clamps are made from a high strength steel. The clamps can be applied using your hand to squeeze the clamp to open the sharp, pointed tips or you can use the Miter Spring Pliers to make it super easy to to spread the tips apart..
  • Once you have the clamp tips spread apart, simply place the spring clamp onto the mitered corner you need to secure, then release the clamp so the tips pierce into the wood and keep your stock in place. Depending on the size of your project, you may need to use more than one spring clamp on each corner to hold your stock in place..
  • Unlike other available spring clamps, the Fulton Miter Spring Clamps don’t cut into your stock piece. The uniquely designed tips are designed to pie....
Check Stock

Woods Clamp Lamp with 10 Inch Reflector and Bulb Guard (300 Watt Bulb, 6 Foot Cord)

  • VERSATILE LAMP CLAMP: Lets you direct light where you want. Ideal for use in office or home.
  • Ideal for a temporary heat source for pig and chicken brooders.
  • CLAMP LIGHT FEATURES: An attached 6 foot cord 18 AWG SPT-2.
  • spring clamp grips that will not damage surfaces.
  • PORTABLE, ON-DEMAND LIGHT SOURCE: The adjustable clamp lamp sports a nifty size. Easy to carry around and set up alternative light.
  • SATISFACTION GUARANTEED: A leader in a wide variety of electrical and electronic products, surge protectors, garden lights, timer products and other accessories, deliver strong performance every day.
  • GROW LIGHT CLAMPING LAMP: Can be used as a grow light during the cold months for indoor plants. Makes a great light source for indoor gardens.
  • INDOORS CLAMP-ON LAMP: Has a metal guard to protect the bulb. Can be used as a desk lamp clamp, table lamp clamp, bedside lamp clamp, or a studio work light.
Check Stock

MOSHUSO Camera Mount Clamp with 360° Ballhead Arm, for DSLR Camera/Field Monitor/LED

  • This 360º Articulation Double Ball Adapter with clamp (Red Knob) is designed for photography studio video shooting.Crab clamp maximum open distance is 54mm.
  • Multifunction: the maximum open distance of the clamp is 54mm, which can help you fix the accessories on 15mm rods, for DJI Freely Movi 25mm and 30mm rods, plate, shoulder rig, bike handles, and so on..
  • Standard 1/4” and 3/8” female thread: 1/4” and 3/8” female thread on the back-side of clamp help you to mount a small camera, monitor, LED video light, microphone, speedlite, and more..
  • Flexibility: you can remove the ballhead arm form the clamp and install a different type of arm with a standard 1/4” male screw.
  • the ballhead can be also used on something else because of the standard 1/4” male screws at both ends..
  • Great quality: the pipe clamp and ball head (and wingnut) are made of aircraft aluminum and stainless steel. The piper clamp has rubber padding to prevent scratches..
Check Stock

The Original Sunscreen 100226 Patio Umbrellas, Navy Blue

  • ...Protection Umbrella. UPF 50+ high rating blocks 99% of UVA and UVB rays.
  • silver coating layer fabric reflects heat to cool you down. This sun umbrella protects your skin and keeps you cool..
  • 30% Larger & Easy Transport. This shade canopy umbrella is 44*44 inches when opened, 30% larger surface area than the standard clamp-on umbrella. Come with a portable carrying case, weighing only 1.5 pounds, and 40 inches long when folded, so it can be taken anywhere..
  • Adjustable All Position Clamp. Flex spring top in shaft and bottom handle allows the umbrella canopy bent in any direction of 360° to adjust right away and sun protection. A universal clamp installed enables to attach of the square and tubular surfaces of the armrest or support of the chair. Clamp on vertically or horizontally direction to adapt to different positions of beach chairs, golf bags, wheelchairs, strollers, courtyards, boating, scooters, etc. The maximum clamp diameter is 1.5 inches..
  • Stable and Sturdy Structure. For the ribs, we use fiberglass, more lightweight and flexible. A special technique of the umbrella cap is molding together with the canopy to avoid breaking in the strong wind. The canopy of this adjustable clamp umbrella is kite-shape-like, creating a multi-range of shade ....
Check Stock

PONY 50 Clamp Fixture for 3/4 Inch Black Pipe

  • features crank-type handle and 1-3/4-inch square clamp faces.
  • Hardened steel construction with baked enamel fish with no holes, rivets, or notches.
Check Stock

Peachtree Woodworking Supply 2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. Ideal For Woodworkers and Cabinet and Furniture Makers

  • Clamping Panels Can Certainly Be A Challenge. Especially When We Try To Use Everyday Pipe Clamps Or Bar Clamps. While These Types Of Clamps Work Fairly Well On Certain Glue Up Projects, The One Thing They Don’T Do At All Is Apply Pressure From The Top And Bottom Of The Panels During Glue Up. In Fact, With All The Pressure Being Applied On Both Sides, Bar And Pipe Clamps Will Almost Certainly Bow, Buckle Or Rack Your Panel Glue Up Project.
  • Let’S Make Racked Panel Glue Ups A Thing Of The Past. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time.
  • Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock.
  • Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6” Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2’S (2” X 4” Ripped In Hal....
Check Stock

Adjustable Hose Clamps Band Clamp – 304 Stainless Steel Air Duct Clamp with 14 Fasteners, Large Worm Gear Hose Clamp for Automotive, Pipe, Plumbing, Tube and Fuel Line (34.5FT, 14PCS)

  • DIY HOSE CLAMP - There are different size tubes in your life, when you choose our Band Clamp set, you can easily trim the hose clamp strap in length you need, then insert the fastener to reach the desired size, no more waste of any materials.
  • MORE SIZE OPTIONS - 34.5 FT 304 stainless steel duct clamp strap with 14pcs fasteners, suitable to cut and get your long large pipe clamp in different sizes, such as 12 inches, 14 inches, 16 inches, 18 inches and so on.
  • EASY TO USE - The worm gear hose clamp adopts the open structure of the inner and outer ring, you just need to adjust the size with screwdriver to loosen or tighten, fix the band clamp on the joint to provide sealing performance. The large air hose clamp can be applied to big size mufflers, automobile exhaust pipe, cables, tubes and so on.
  • DURABLE MATERIAL - Hose clamp kit is made of 304 stainless steel, strong rust resistance, water resistance, corrosion resistance, oxidation resistance, durable, which can be applied indoor and outdoor, such as in kitchen, bathroom, garden, boat and so on.
  • 100% SATISFIED - If you have any questions or concerns with your product, just contact us and we will replace the product or refund your order. Our team is always at your service..
Check Stock

4PCS Sneeze Guard Partition Clamp Adjustable Plexiglass Divider Clamps, Removable Partition Clamp for Desk Sneeze Guard Privacy Panel

  • SNEEZE GUARD PARTITION CLAMP: Made of high-quality aluminum alloy, the surface is sandblasted, not easy to fade, rust-proof and durable, all partition clamp are carefully checked by hand.
  • MULTIPLE PROTECTIONS: Each partition clamp is equipped with a transparent silicone non-slip rubber pad, which makes each of your acrylic sneeze guard more stable, no need to worry about falling off, no drilling, and no damage to the tabletop.
  • C PARTITION CLAMP: The head of the clamp is detachable can be adjusted according to your needs. Thickened bottom with non-slip rubber pads for more stable installation on desk in the following range: 0.67"-2" inch / 1.7mm-5.1mm thick.
  • ADJUSTABLE: The partition clamp can adjust the clamp width to fit Sneeze Guards of different thickness, suitable for sizes about 0.078" - 0.59"inch/2mm-15mm.
  • VERSATILE: Sneeze guard partition clamp for mounting on any desk, counter, office, school, library.
Check Stock

5pack Hold Down Toggle Clamps Woodworking,201B Clamps for Woodworking,Vertical Clamp,Cam Clamp Quick Release Toggle Clamp for CNC Hold Down Clamps,200Lbs Heavy Duty Toggle Clamp for T Track Cam Action

  • Holdfast Clamp:Quick-release horizontal toggle clamps with rubber tips,cam lever hold down clamp for cnc workholding clamps.Quick release clamp with non-slip oil- and stain-resistant red vinyl solid handle is easy for woodworking clamps..
  • Large Toggle Clamp:90.7Kg/200Lbs heavy duty clamps with solid grip.This 201b toggle clamp is adjustable toggle clamp by screw down clamps lever.It's perfect for t track cam action hold down clamp..
  • Material : Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
  • Clamp Spesifics: Whole size of clamp 201B 5.90"x3.74"x1.41".
  • Length of large toggle clamp foot including rubber 1.88".
  • Wide Range of Uses: Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock

Multi-Function Camera Mount Clamp with 360° Ballhead Arm,Magic Arm Mount Bracket for DSLR Camera/Field Monitor/LED

  • ★This 360º Articulation Double Ball Adapter with clamp is designed for photography studio video shooting.Crab clamp maximum open distance is 54mm.
  • ★Multifunction: the maximum open distance of the clamp is 54mm, which can help you fix the accessories on 15mm rods, DJI Freely Movi 25mm and 30mm rods, plate, shoulder rig, bike handles, and so on..
  • ★Standard 1/4” and 3/8” female thread: 1/4” and 3/8” female thread on the back-side of clamp help you to mount a small camera, monitor, LED video light, microphone, speedlite, gopro and more..
  • ★Flexibility: you can remove the ballhead arm form the clamp and install a different type of arm with a standard 1/4” male screw.
  • the ballhead can be also used on something else because of the standard 1/4” male screws at both ends..
  • ★Great quality: the pipe clamp and ball head (and wingnut) are made of aircraft aluminum and stainless steel. The piper clamp has rubber padding to prevent scratches..
Check Stock

G4Free UPF 50+ Adjustable Beach Umbrella XL with Universal Clamp for Chair, Golf Bags, Stroller, Wheelchair, Bleacher, Patio(Lake Blue)

  • ...+ UV Protection Umbrella. UPF 50+ high rating blocks 99% of UVA and UVB rays.
  • silver coating layer fabric reflects heat to cool you down. This sun umbrella protects your skin and keeps you cool..
  • 30% Larger & Easy Transport. This shade canopy umbrella is 46*44'' when opened, 30% larger surface area than the standard clamp-on umbrella. Come with a portable carrying case, weighing only 2 pounds, 41'' long when folded, so it can be taken anywhere..
  • Upgraded Adjustable Clamp. The flex spring top allows the umbrella canopy to bent in any direction to adjust right away and sun protection. The universal clamp enables to attach to the square and tubular surfaces of the armrest or support of the chair. You can clamp it on vertically, horizontally, or in any other direction to adapt to different positions of beach chairs, golf bags, wheelchairs, strollers, courtyards, boating, scooters, etc. The maximum clamp diameter is 1.37''..
  • Stable and Sturdy Structure. For the ribs, we use fiberglass, more lightweight and flexible. A special technique of the umbrella cap is molding together with the canopy to avoid breaking in the strong wind. The canopy of this adjustable clamp umbrella is 7-ribs kite-shape-like, creating a multi-range of shade to protect you well..
Check Stock

PONY Malleable Iron C-Clamp Set, 3-Piece, (1\

  • [Clamp Set]: 3pc mini pony C-clamp / G-clamp constructed by iron casting for strength and toughness.
  • [Dimensions]: 1-inch c clamp: 1-inch jaw opening & 1-inch throat depth.
  • 2-inch c clamp: 2-inch jaw opening & 1-inch throat depth.
  • 3-inch c clamp: 3-inch jaw opening & 2-inch throat depth.
  • [Characteristics]: Bright Pony Orange Gloss Finish prevents the clamp from corrosion and rust for added longevity. Moveable parts with zinc-plated surface for rust resistance.
  • [Comfort Of Use]: Sliding T-handle offers suitable maximum torque in order to reduce hand fatigue, flexible and smooth threaded rods without stick during use.
  • [Range Of Application]: Ideal for wide range of applications as crafting, painting, sculpting, masonry, metalwork, photography, DIY and so on.
Check Stock

DCT C Clamps for Woodworking Welding Clamps Locking Pliers Set 3-Piece Wood Clamp Set 11in and 6in Swivel Tip

  • LOCK & HOLD YOUR PROJECT: Use the DCT | 3-Piece Hand Tools C Clamp Set to grip your project without slippage.
  • This locking C clamp set includes 1 clamp with regular pads and 2 clamps with swivel pads for damage-free automotive work with auto body panels, most home improvement and repair, woodworking wood joints projects, and some welding applications.
  • 3 CLAMPS, 2 SIZES: 11-inch clamp with swivel pad tips for securing medium to large work, approximate 1-inch (2.5cm) maximum opening, 0.9-inch x 1.1-inch (2.3cm x 2.8cm) flat clamp face size.
  • 6-inch clamp with swivel pad tips for small to medium pieces, approximate 0.7-inch (1.7cm) maximum opening, 0.7-inch x 0.8-inch (1.8cm x 2cm) flat clamp face size.
  • 6-inch clamp with regular tips, approximate 1.3-inch (3.2cm) maximum opening, 0.4-inch x 0.3-inch (0.9cm x 0.7cm) rounded clamp face size.
  • BUILT TO LAST: Constructed from nickel-plated carbon steel for maximum strength and longevity.
  • Hex key adjustment screw for adjusting to the correct pressure.
  • Classic guarded trigger release for maximum locking force and keeps pliers locked securely.
  • Unlike other C-type clamps, these C clamp locking pliers are designed with the handle opposite the clamp to allow access to tight spaces.
Check Stock