Categories

Best Clamp on Exhaust Tips

ESPEEDER 2.0" Lap Joint Band Clamp Exhaust Clamps Pipe Parts Stainless Steel 2Pcs

  • ...ade of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. Come with 2Pcs/Package. reducing costs and time Significantly..
  • The lap joint clamps 2.0 are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2.0" lap joint band clamp, you can feel free to contact us via Amazon Mail. We provide 24-hour mail s....
Check Stock

IFOKA 2.5 Inch Inlet Exhaust Tip , 2.5' Inlet x 3' Outlet 6 Inch Long Diesel Exhaust Tips, Stainless Steel Polished Finish Exhaust Tailpipe Extension, Clamp-on Design

  • Dimension: Exhaust tips 2.5 inch inlet, 3 inch outlet, 6 inches overall length. Note: Fits tailpipe with 2.5 inches outlet diameter only, please measure the outlet diameter of your pipe before purchase.
  • Material: Stainless steel with mirror polished surface treatment, anti-corrosive, high temperature resistance, and not easy to scratch & fall off. Prevent the original exhaust tailpipe from sun and rain..
  • Easy to install: Cleaning tailpipe and exhaust tips, unscrew the bolt but not remove it, slide the tip into place on the tailpipe, move the clamp to a place flush with the entry port, then tighten the screw and clamps..
  • Unique Driving Pleasure: Rolled edge and angled cut design, and elegant chrome can perfectly decorate your vehicle. Thicker inner waller design makes the vehicle sounds rumble and crackle, give you the unique driving pleasure..
  • Rustproof Design: There is a drainage hole on the bottom of the exhaust tips, not easy to accumulate water and avoid rust effectively. In order to prolong the service life of the product, clean up once a month..
Check Stock

ZOENHOU 4 PCS 2 Inch Butt Joint Exhaust Band Clamp, 304 Stainless Steel Exhaust Band Clamp Sleeve for Exhaust Pipe, Muffler, Headers, Manifolds, Coupler

  • PREMIUM MATERIAL - The 2 inch exhaust clamp is made from high quality 304 stainless steel, stainless steel material, not easy to rust, corrosion-resistant. Precision-machined, shiny surface with no burr. Inside diameter: 2 inches..
  • EASY INSTALLATION - Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect. It is removable, without welding, and saving time and effort..
  • WIDE RANGE OF APPLICATIONS - Butt joint exhaust clamp suitable for the exhaust system, pipes, muffler. Arc curved face, capability prevent exhaust gas and noise leaks. The exhaust band clamp is reusable without damaging the pipes..
  • PERFECT DESIGN - Our exhaust pipe clamp for exhaust provides a 360-degree full clamping area to generate overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections!.
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our exhaust band clamp sleeve, you can get 30 days of worry-free refund, 7 days of 24-hour service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

ESPEEDER 3.0 Lap Joint Band Clamp Exhaust Clamps Pipe Repair Parts Stainless Steel

  • Universal fitment, Joins 3.0" OD Pipe to 3.0" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs.....
  • The lap joint clamps 3.0" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat....
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without....
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one....
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 3.0" lap joint band clamp, you can feel free to contact us via....
Check Stock

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and....
Check Stock

SPEEDWOW 2.0 Inch Butt Joint Exhaust Clamp Band Coupler Sleeve Stainless Steel 2 PCS

  • Exhaust clamp is used for 2.0 Inch OD to 2.0" OD exhaust pipe/muffler/catalytic converters connection,ect. Joint your exhaust tubing together quickly....
  • No welding design makes exhaust clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. Exhaust....
  • The reaction block provides a full 360 °equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined....
  • Application:Butt joint Exhaust Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance..
  • WARRANTY - SPEEDWOW provide 2.0 inch Exhaust Band Clamp with 5-month warranty.Any product problem, please feel free to contact us..
Check Stock

SPEEDWOW 3.0 Inch Butt Joint Exhaust Clamp Band Coupler Sleeve Stainless Steel 2 PCS

  • Exhaust clamp is used for 3.0 Inch OD to 3.0" OD exhaust pipe/muffler/catalytic converters connection,ect. Joint your exhaust tubing together quickly....
  • No welding design makes exhaust clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. Exhaust....
  • The reaction block provides a full 360 °equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined....
  • Application:Butt joint Exhaust Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance..
  • WARRANTY - SPEEDWOW provide 3.0 inch Exhaust Band Clamp with 5-month warranty.Any product problem, please feel free to contact us..
Check Stock

SPEEDWOW 2.5 Inch 2 1/2 Butt Joint Exhaust Clamp Band Coupler Sleeve Stainless Steel 2 PCS

  • Exhaust clamp is used for 2.5 Inch OD to 2.5"OD exhaust pipe/muffler/catalytic converters connection,ect. Joint your exhaust tubing together quickly....
  • No welding design makes exhaust clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. Exhaust....
  • The reaction block provides a full 360 °equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined....
  • Application:Butt joint Exhaust Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance..
  • WARRANTY - SPEEDWOW provide 2 1/2 inch Exhaust Band Clamp with 5-month warranty.Any product problem, please feel free to contact us..
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

FORTLUFT Exhaust Dual Tip Carbon Fiber & Stainless Steel (3.50''/89mm, Dual Tip Competition Style RIGHT SIDE)

  • Right Side - Outside Diameter 3.50''/89mm - Inlet Pipe Outside Diameter 2.50''/63.5mm.
  • Universal, Stainless Steel and Carbon Fiber, Nonmagnetic.
  • FORTLUFT provides the guarantee for the Exhaust Dual Tip Slant Cut Competition Style Carbon Fiber & Stainless Steel corrosion-resistance for the 1-year period or during the next 15000 miles (24000 km) after the spare part installation..
  • The universal Exhaust Dual Tip Slant Cut Competition Style Carbon Fiber & Stainless Steel FORTLUFT is part of the automobile exhaust system. This element decorates and completes the exhaust system providing a car with the sport style look. Thanks to the universal fastening coupled with a clamp, this spare part can be used for any car brand..
  • The spare part has a modern design and is made from the high-quality Carbon Fiber & Stainless Steel. Exhaust Dual Tip Slant Cut Competition Style perfectly blends with the car making it look sporty and aggressively. Leading car tuning studios recommend such kinds of tips to their customers. Exhaust Dual Tip Slant Cut Competition Style Carbon Fiber & Stainless Steel has two nozzles of different lengths. There are two models provided depending on the installation method: left side and right side..
Check Stock

Top10 Racing Red Flame Led Exhaust Muffler Tip Carbon Fiber Racing Automobile Car Tail Pipe Light 2.5 Inch Inlet 4 Inch Outlet - Straight Style

  • Exhaust Pipe with LED Light: Creative design with LED Light when it's connected with the your car/truck, producing amazing visual effects. A must-have for modified enthusiasts!.
  • Superior Quality Exhaust Tips: Carbon fiber muffler tip is resonated to enhance sound while protecting the exhaust pipe from sun/rain and avoiding rusting and deformation.
  • Universal Fit Cars/Trucks: 2.5 inch inside diameter inlet, 4 inch outside diameter outlet, 6.5 inch overall length.
  • Style: Bolt On - Carbon Fiber Sleeve with Straight Edge Design..
  • Clamp on design, Easy to install in minutes.
Check Stock

Top10 Racing Red Flame Led Exhaust Muffler Tip Carbon Fiber Racing Automobile Car Tail Pipe Light 2.5 Inch Inlet 4 Inch Outlet - Rolled Style

  • Exhaust Pipe w/ LED Light: Creative design with LED Light when it's connected with the your car/truck, producing amazing visual effects. A must-have for modified enthusiasts!.
  • Superior Quality Exhaust Tips: Carbon fiber muffler tip is resonated to enhance sound while protecting the exhaust pipe from sun/rain and avoiding rusting and deformation.
  • Universal Fit Cars/Trucks: 2.5 inch inside diameter inlet, 4 inch outside diameter outlet, 6.5 inch overall length.
  • Style: Bolt On - Carbon Fiber Sleeve with Rolled Edge Design..
  • Clamp on design, Easy to install in minutes.
Check Stock

Top10 Racing Blue Flame Led Exhaust Muffler Tip Carbon Fiber Racing Automobile Car Tail Pipe Light 2.5 Inch Inlet 4 Inch Outlet - Straight Style

  • Exhaust Pipe with LED Light: Creative design with LED Light when it's connected with the your car/truck, producing amazing visual effects. A must-have for modified enthusiasts!.
  • Superior Quality Exhaust Tips: Carbon fiber muffler tip is resonated to enhance sound while protecting the exhaust pipe from sun/rain and avoiding rusting and deformation.
  • Universal Fit Cars/Trucks: 2.5 inch inside diameter inlet, 4 inch outside diameter outlet, 6.5 inch overall length.
  • Style: Bolt On - Carbon Fiber Sleeve with Straight Edge Design..
  • Clamp on design, Easy to install in minutes.
Check Stock