Best Clamp on Level Meter
BTMETER BT-7200APP TRMS 6000 Counts Clamp Multimeter, Digital Clamp-on Ammeter for AC/DC Current Voltage Resistance Capacitor Frequency Continuity Temperature NCV Meter
- ⚡【Monitoring on Your Phone】Smart clamp-on multi tester BT-7200APP can auto connect to your Android / Apple phones or tablet with ease, allows you viewing logging the data out of the arc flash zone 15m (50 ft) away, and save the measurement for detailed analysis, sharing later..
- ⚡【AC DC Clamp Amp Voltmeter w/ NCV】This clamp multitester can accurately measure AC/DC Amperage, AC/DC Voltage, Resistance, Frequency or Duty Cycle, Capacitance and also provides Noncontact AC Voltage(NCV) detection, Diode, Continuity Buzzer and Temperature(℃/℉) tests. Easy to use in non-contact ampere measures, troubleshoot electrical problems in , motors, household appliances, HVAC.
- ⚡【Continuous Data Logging Clamp DMM】This clamp-on meter can displays AC DC amps, volts, ohms, Cap, Hz Temp in Max/Min on the same interface with real-time reading. The curve graph w/ timing will show you the changes of amp volt flow more visually. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full..
- ⚡【Reliable True RMS Voltage Amperage Meter】0.1 amp resolution for 0.1....
Check StockCAMWAY Portable Clamp Meter Digital 6000 Counts AC/DC Current TRMS AMP OHM Tester Capacitance Multimeter with Alligator Clips
- 【Auto/Manual Ranging & NCV】 The 6000counts Meter Automatically Select Appropriate Decimal Point Place.
- NCV Detects Existence of AC voltage on....
- 【Clamp Measuring】 Clamp Jaw up to 28mm, Clamp Meter Measures AC Current without Interrupting Circuit, Makes it Much Safer to Use on Mains Cables....
- 【True RMS Multi-purpose Clamp Meter】 AC/DC Current, Accurate AC/DC Voltage , Frequency, Duty Cycle, Diode, Temperature Test,Capacitance and....
- 【Continuity Test & Overload Protection Display】 Low Voltage Indication & Overload Protection Designed , Safely Accurately Confirm the Circuit....
- 【Convenient to Use】 Meter size 210×110×45mm Portable . High Resolution , Low Battery Display. Large Backlit LCD Screen Improves Visibility.....
Check StockOWON Current Clamp Meter Multimeter CP-05+ Clamp Current Probe 200KHz 400A for Oscilloscope 4A 40A 200A 200-400A Test Range with BNC Connector
- ¡¾High Performance¡¿The current clamp can take accurate current readings .The current clamps are the ideal tools to extend the current ranges of Oscilloscope tools.Support Auto zero at power on, relative zero correction function.It has Band wide up to 200KHz,support low battery indication .Adopt of amorphous alloy core, with high performance, low loss ..
- ¡¾BNC connector¡¿The current clamp Multimeter features a BNC connector and can be plugged directly use. After connected well, switch the current clamp on (power LED should light) and then clamp the jaws around the current carrying conductor as shown. Typical Uses The AC/DC Current Probe simply offers the best value for money without compromising resolution..
- ¡¾Multiple Test Ranges¡¿The OWON CP-05+ current clamp is ideal for use with automotive oscilloscopes for measuring currents between 1 mA and 400 A. Various current test range, 4A, 40A, 200A, 200-400A test range are available.Low noise level, and high detection accuracy..
- ¡¾Easy to Use¡¿The current clamp has range selection settings, set by a slider switch on the handle of the probe. In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No ele....
Check StockSouthwire CLAMP Meter MAINTPRO 23030T
- PROFESSIONAL DEVICE: The Southwire MaintenancePRO 23030T clamp meter is a rugged high end AC and AC/DC 1000A clamp meter for the serious electrician..
- FUNCTIONALITY: The MaintenancePRO 23030T Clamp meter has 10 Measuring functions along with a powerful LED work light..
- ENHANCED FEATURES: Added features like an easy to read 6,000 count backlit display and a built in non-contact AC voltage detector makes the 23030T the....
- SAFETY AND INDUSTRY APPROVAL: With a UL listed safety rating of CAT IV 600V/CAT III 1000V, these clamp meters are built to get the tough jobs done..
- WHAT’S IN THE BOX: MaintenancePRO 23030T Clamp meter, Test leads, Type K temperature probe with banana plug adapter, Carrying case and a 9 volt....
Check StockFluke TL75 Hard Point Test Lead Set
- The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
- The 117 multimeter features true RMS for accurate measurements on non-linear loads.
- The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
- The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
- The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check StockINGCO Auto Ranging Digital Clamp Meter TRMS 6000 Counts Measures AC/DC Voltage to 600V AC/DC Current to 600A Resistance Capacitance Diode Test Temperature Multimeter
- WIDE RANGE OF TESTS. INGCO TRMS auto ranging clamp meter meets your different needs for measuring, including AC/DC voltage, AC/DC current, resistance,....
- EASY TO USE. The backlight changes to orange when volt > 80V or current > 3A with dual readings.
- Flashing light helps place the probes to correct....
- PROFESSIONAL MULTIMETER. Automatic range turntable design and NCV non-contact measurement. The low pass filter (LPF) ensures accurate drive output....
- ALL ON ONE DEVICE. 100mF large capacity. INGCO clamp meter can be used as clamp meter as well as capacitance meter. 100mF equals 100000μF. It's....
- WORRY-FREE ORDER. If you are not 100% satisfied with our clamp meter, we offer you 90 days refund or replacement. If you have any problem, please....
Check StockFluke 117/323 KIT Multimeter and Clamp Meter Combo Kit
- The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
- The 117 multimeter features true-rms for accurate measurements on non-linear loads.
- The 117 multimeter features Low input impedance which helps prevent false readings due to ghost voltage.
- The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non-linear signals.
- The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check StockSwitches Be Trippin Funny Master Electrician Fuse Box T-Shirt
- The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
- The 117 multimeter features true RMS for accurate measurements on non-linear loads.
- The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
- The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
- The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check StockAIOMEST Digital Clamp Meter 6000 Counts, TRMS Multimeter with Auto Ranging, Amp Meter Measures Inrush AC&DC Current, AC&DC Voltage, Resistance, Capacitance, Diodes and Temperature
- ✨【6000 COUNTS CLAMP METER】: AN-6205 clamp meter is professionally designed for electricity circuit properties measurement. Test a wide range of measurements including AC/DC Voltage 0.01mV~600V, AC/DC Current 0.01A~600A, Resistance 0.1Ω~60MΩ, Continuity and Diode Test..
- ✨【AUTO POWER OFF SAFELY】: When measurement exceeds 15 minutes without switching mode and pressing key, the meter will switch to standby mode. Press any key to exit standby mode. The auto power off mode can provide the voltmeter with a longer service life while also better protecting the battery..
- ✨【STRONG OPERABILITY】: Built with 1.34 inches large double open jaw and pick up AC/DC Current flowing through the conductor, increasing safety while improving this meter’s capabilities. Over-load protection circuit can effectively help you to carry out measurement work within the measurement range. Auto ranging and auto LCD backlight make your measurement more convenience..
- ✨【CONVENIENT FEATURES】: The avometer included relative value, MAX/ MIN, data hold, inrush current test and audible continuity test, ideal for electrical troubleshooting problems, circuit properties measurement, automotive repair and maintenance, lab, industrial and household applications..
Check StockAstroAI Digital Clamp Meter Multimeter 2000 Counts Amp Voltage Tester Auto-ranging with AC/DC Voltage, AC Current, Resistance, Capacitance, Continuity, Live Wire Test, Non-contact Voltage Detection
- Versatile Digital Clamp Meter: Accurately measures AC Current (DO NOT MEASURE DC CURRENT)! AC/DC Voltage, Capacitance, Resistance, Diode Continuity and Live Wire Tests. This clamp meter is a really useful tool for solving industrial and household electrical issues.
- Large Jaw Opening: The jaw opening measures AC current in a conductor without touching or interrupting the circuit. Its slim and compact size makes it easy to operate in narrow spaces.
- Thoughtful Design: Support Data Hold, Max/Min, Auto Shut-off, low battery indicator and continuity buzzer. Includes Convenient features like Audial and Visual Alarm, LCD Backlit Screen and Flashlight make it easy to use. Two 1.5V AAA batteries are included in the package.
- Non-contact Voltage Testing: This Clamp Meter features non-contact voltage testing with sound and light alarm. When the Meter senses a weak AC signal, the green indicator light will come on and the buzzer will emit a slow, audible beep. when the Meter senses a strong AC signal, the red indicator light will come on and the buzzer will emit a quick beep.
- Additional Tips: The clamp meter has passed the environmental pollution degree 2 and overvoltage category III 600V safety standards. Combined with Amazon's excellent delivery, we provide lifetime....
Check StockAstroAI Digital Clamp Meter Multimeter 4000 Counts Auto-ranging Amp Voltage Tester Measuring AC/DC Voltage & Current Resistance Capacitance Frequency Continuity Live Wire Test NCV Detection
- Versatile Digital Clamp Meter: Accurately measures AC/DC Current, AC/DC Voltage, Capacitance, Frequency, Duty Cycle, Resistance, Diode, Continuity and Live Wire Tests. This clamp meter is a really useful tool for solving industrial and household electrical issues..
- Non-contact Voltage Testing: This Clamp Meter features non-contact voltage testing with sound and light alarms. When the Meter senses a weak AC signal, the green indicator light will come on and the buzzer will emit a slow, audible beep. when the Meter senses a strong AC signal, the red indicator light will come on and the buzzer will emit a brief beep.
- Multifunctional & Easy to read: Support Data Hold, Max/Min, Auto power off after 15 minutes inactivity, low battery indicator and continuity buzzer. The LCD Backlit Screen and Flashlight make it easy to use in a dark working area. ZERO function decreases the data error influenced by the Earth’s magnetic field, and helps you to obtain a more accurate measurement..
- Large Jaw Opening: The jaw opening measures current in a conductor without touching or interrupting the circuit. Its slim and compact size makes it easy to operate in narrow spaces..
- Additional Tips: This clamp meter has passed the environmental pollution test degree 2 and overvo....
Check StockAmprobe AMP-310 Clamp Meter
- 18-Inch flexible clamp on meter enables measurements in areas that are difficult to access.
- True RMS CAT IV 600V, CAT III 1000V meter.
- Backlit LCD display for clear readings with 3000 count.
- Durable, with drop protection to 6.6-feet (2 m).
- Auto-power off after 15 minutes of non-usage conserves battery life.
- Low battery indicator and easily accessible battery compartment.
Check StockAutomotive Electrical and Electronics Systems and Components: Testing and Repairs: Use of multimeter for Automotive Electrical Diagnostics
- The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
- The 117 multimeter features true RMS for accurate measurements on non-linear loads.
- The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
- The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
- The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock