Categories

Best Clamp on Rotary Tool Holder

Huepar Electronic Self-Leveling Rotary Laser Level Kit -360 Horizontal Laser Beam Interior/Exterior Rotating Laser Level Tool, Receiver, Protective Glasses, Alkaline Battery, Hard Case Kit RL200HR

  • ✔️WIDE APPLICATIONS: This rotary laser features electronic self-leveling, projecting 360 horizontal laser beam. You can use horizontally for install wainscoting, or leveling cabinets and more indoor & outdoor applications. This is a great laser tool for any job from DIY to large commercial construction, and everything in between..
  • ✔️ELECTRONIC SELF-LEVELING & VIBRATE MODE: Electronic Horizontal self leveling makes this rotary laser self level up to 5° within 10 seconds. Besides, slight movements can be ignored in windy or other vibrating conditions while turn on vibrate mode. Self-leveling or manual mode, choose whatever you want with our rotary laser level..
  • ✔️HIGH PRECISION & EXTENDED RANGE: Our rotary laser level projects bright red beam with accuracy of +/- 1/8″ at 100Ft. It provides precision needs for the contractors when doing jobs like alignment and height transfer. In addition, it is a great tool for large job-sites at a working range up to 1600Ft diameter using with our Receiver(included in the kit)..
  • ✔️DURABLE DESIGN: RL200HR rotary laser level adopts the finest industry materials and coated glass, which not only provides high quality of laser beam but also ensures the tool survive even after minor accide....
Check Stock

DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50in / 127cm – Circular, Rotary, Jig, Router

  • INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50” Inch / 127cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area.
  • ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor.
  • 58” x 2.1” x 0.5” inches (147cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp.
  • BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling.
  • Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory.
  • When clamped, this solid guide shows no play and it tightly holds its grip.
  • WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 50 inches/127cm.
Check Stock

Rotary Fly Tying Vise - Peak Fishing Vise With C-Clamp Mount

  • The PEAK Rotary Vise is designed for optimal tying efficiency and ease of adjustment. Materials (including Stainless Steel, Brass, Tool Steel, and Aircraft Aluminum) are chosen to last a lifetime..
  • Hardened and tempered tool steel jaws hold hooks securely, from size 2/0 (depending on exact hook wire diameter) down to the smallest you can buy..
  • C-Clamp Mount option is engineered to outperform the competition. Reverse the lower rabbeted jaw to get a grip range from 2-1/4" to 11/16"..
  • Jaws ride on precision guide rods holding the jaw faces parallel, there is no rotating clamp screw bearing against your table to damage the finish..
  • The deep rabbet engages rounded table edges so your vise won't rock..
Check Stock

Johnson Level & Tool 40-6535 High Accuracy Dual Slope Rotary Laser Kit, Red, 1 Kit

  • ACCURATE LEVELING: This Johnson Rotary Laser Tool's self-leveling feature in the horizontal mode makes it ideal for excavation, concrete and other outdoor applications, while the electronically controlled dual-slope mode makes this laser ideal for drainage, flatwork or complex landscaping jobs..
  • HIGH ACCURACY: This rotary laser kit is the simplest way to get your outdoor job up and running. With simple set-up and visual and audible alarms to alert you when the rotary is beyond its leveling range, you can quickly get the information you need with accuracy..
  • USER SAFETY: This laser kit for leveling features visual and audible security alarms, promising complete accuracy along with safety. The laser beam will flash and an audible alarm will siren to indicate that the leveling range is incorrect..
  • ROTARY LASER: Perfect for flatwork contractors, excavators, and anyone doing vertical or slope work, this tool has a 700 RPM rotation speed. It self-levels both horizontally and vertically, making vertical layout such as fencing, footings, and drywall track effortless..
  • KIT INCLUDES: This Dual Slope Rotary Laser Kit is equipped with a Laser, NiMH rechargeable battery pack and charger, remote control with 9V battery, detector with 9V battery and clamp, and hard-shel....
Check Stock

Oumefar Welding Electrode Clamp, 400 Amp Twist Type Holder Welding Electrode Rod Holder Welding Electrode Twist Type Full Copper (Black)

  • COMPACT DESIGN ---- Welding electrode holders have strict quality control and quality assurance, compact design, small size, and the handle conforms to ergonomic design, and the work experience is more labor-saving..
  • FAST AND CONVENIENT ---- Type Holder Welding Tool has excellent workmanship and practicality, 400~500A universal, welding electrode clamp is more convenient to choose welding rod, which will help you to weld materials quickly and conveniently..
  • USED FOR ---- The welding Twist Type Full Copper holder adopts advanced technology and exquisite craftsmanship, and welding electrode clamp is not hot for long-term welding. Welding electrode clamp is used as a welding electrode holder for various rod electrodes..
  • WELDING ELECTRODE CLAMP ---- Type Holder Welding Tool have 1 x electrode holder, 1 x hex wrench, 1 x spacer and 1 x spacer post in the package. You can choose from black and yellow to meet your needs..
  • SERVICE ---- We launch products that meet your needs, and you will get our 100% problem-free guarantee. Customer's smile is our first goal,if you have any question,....
Check Stock

146pcs Rotary Tool Accessories Kit, Power Tool Accessory Set with Drill Bit Set for Cutting, Carving, Polishing, Sanding Grinding

  • Full-featured Package: This rotary tool accessories kit contains complete cutting, grinding, sanding, sharpening, polishing, engraving, drilling, cleaning and other rotating tool accessories, which can be applied to various materials such as wood, plastic, metal, etc. It is very practical.
  • Good Compatibility: The rotary tool set is very compatible. The 3 mm (1/8 inch) tool holder is compatible with many rotary tools,  for die grinders, flexible shafts, and any other tool that accepts most rotary tools with 1/8 inch diameter shank bits. Can be stored as a daily tool kit.
  • Wear-resistant and Durable: All accessories are made of high-quality materials, very wear-resistant and durable, not only can achieve the effects of grinding, cutting, polishing, engraving, drilling, etc., but also can be used for a long time.
  • Storage Box Packaging: All tools are packed in boxes and will not be lost in confusion. You can find the tools that you want at a glance.
  • Wide Application: The power tool accessory set is very functional, not only suitable for most metals, castings, welded joints, but also for fine processing of jade, ceramics, glass, wood, hardened steel, cast iron, stainless steel, etc..
Check Stock

CARTLIFE Plywood and Drywall Panel Carrier Tool,Sheetrock Gripper,Heavy Duty Metal Gripper for Clamp Wood Board or Drywall Lifter with Single Hand (No Back Pain)

  • ...als from the bottom, simply place the clamp over the top edge of the material, then lift. The self-adjusting clamp holds materials tight as you lift..
  • ✅【Only one-hand carrying】Ergonomic design for one person to lift and move sheet goods by one hand,simply place the clamp over the top and lift..
  • ✅【Heavy Duty Holder】Carrying all kinds of plywood, panels, sheets, and slabs, carry MDO or MDF panels, OSB, melamine, drywall, tabletops, sheet metal, and other sheet goods. The self-adjusting gripper 0-1”.
  • ✅【Innovative Tool Design】Heavy-duty solid metal construction. The clamp and the handle arm are made in aluminum. The handle is made of impact-resistant ABS polymer. This high-quality construction ensures that the tool can hold up to a lifetime of strenuous use..
Check Stock

XLAQ 2 Pack Tape Measure Marker Tool, 2022 Upgrade Precision Premium Ascribing Pencil Holder Clamp Fixed Mark Reel Scribing Draw Circle Locator Tool,Corner Flexible Ruler

  • 2 Pack Tape Measure Marker Tool, 2022 Upgrade Measure Precision Tool, Premium Ascribing Pencil Holder Clamp Holder Fixed Mark Tape Reel Scribing Draw Circle Locator Tool,Corner Clamp Flexible Ruler.
Check Stock

Johnson Level & Tool 40-6517 Self-Leveling Rotary Laser System, 29 x 7", Red, 1 Kit

  • ROTARY LASER LEVEL: This Johnson Self Leveling Kit is ideal for various indoor and outdoor jobs. Perfect for small jobsites.
  • this rotary tool self-levels in the horizontal plane and levels manually in the vertical plane..
  • SAFETY ALARM: The rotary laser features visual and audible alarms that alert you when the rotary is beyond its leveling range and the locking pendulum that protects the inner pendulum during transportation..
  • APPLICATIONS: This rotary laser may be used to check cut and fill.
  • ROTATIONAL SPEEDS: This manual rotary laser with illuminated vertical vial supports variable rotational speeds of 200-600 RPM. A variable RPM allows the user to set the laser to the speed that provides the optimum visibility..
  • PRODUCT SPECIFICATIONS: With the included wall/ceiling mount.
  • elevating tripod and hard-shell carrying case.
  • this leveling system will get your jobsite up and running..
Check Stock

Rotary 9361 Transmission Oil Filter for Exmark

  • ACCURATE LEVELING: This Johnson Rotary Laser Tool is designed to complete both indoor and outdoor leveling jobs. It is a manual leveling laser that helps you level with accuracy as high as ±1/4" per 100’..
  • SCAN MODES: The manual-level rotary laser features both large and small scan modes for versatile use. The modes help achieve an accurate laser chalk line, with the laser beam ranging up to 800 ft..
  • MANUAL LEVELING: The manual leveling laser has in-built leveling vials to be used for leveling in the horizontal and vertical plane. The lasers can easily be leveled by manually aligning the bubble in the vials built into the laser units..
  • ROTARY LASER: This rotary aligning level kit projects a scan line that can be moved clockwise or anti-clockwise and offers adjustable rotating speeds as per requirement. The laser system offers simultaneous 90-deg. split beam functionality in the vertical mode..
  • KIT INCLUDES: This Red Manual-Leveling Rotary Laser System is equipped with replaceable parts such as 4 "AA" alkaline batteries, tinted laser beam enhancement glasses, soft-sided carrying case, instruction manual, aluminum tripod, 13 ft. aluminum grade rod, detector with 2 "AAA" alkaline batteries and clamp, wall/ceiling mount..
Check Stock

BEAMNOVA 3PCS 5/8\ CNC Metal Indexable Lathe Tools Sets Holder MTJNR1616H16, MWLNR1616H08, MCLNR1616H12 Blades WNMG431, CNMG431, TNMG331

  • Material: Carbide + Tungsten steel. Number tool holder: 3Pcs (MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12) Number of CNC blades: 3Pcs (WNMG431+CNMG431+TNMG331). Applicable machine tools: lathe. Each tool holder is black oxidized smooth surface and tool hardness (HRC 48 degrees up and down) and precision are up to the first grade..
  • Turning inserts exquisite workmanship, high strength, high toughness, stable and durable..
  • (1)MTJNR1616H16 : Shank Diameter (Length × Width): 16*16 mm (5/8 * 5/8 in). Overall Length: 100 mm (4 in). Main Declination: 93°. Shim: ST 1603. Pin: MCT513. Clamp: HL 1814. Clamp Screw: MCS625. Wrench: L2.0, L3.0. Matching Inserts Model Number: TNMG 331. Matching Inserts Length: 16 mm (5/8 in). Matching Inserts Thickness: 4 mm..
  • (2)MWLNR1616H08 : Shank Diameter (Length × Width): 16*16 mm (5/8 * 5/8 in). Overall Length: 100 mm (4 in). Main Declination: 95°. Shim: SW 0804. Pin: MCT617. Clamp: HL1814. Clamp Screw: MCS625. Wrench: L2.5, L3.0. Matching Inserts Model Number: WNMG 431. Matching Inserts Length: 8 mm. Matching Inserts Thickness: 4 mm..
  • (3) MCLNR1616H12 : Shank Diameter (Length × Width): 16*16 mm (5/8 * 5/8 in). Overall Length: 100 mm (4 in). Main Declination: 95°. Shim: SC 1204. Pin: MCT617. Clamp: HL1814. Clamp Screw: MCS62....
Check Stock

GBJ SRDPN2020K10 (20mm*125mm) + RPMT10T3 45° Lathe Turning Holders Lathe Turning & Profiling Tool Holder for Round Carbide Inserts RPMT10 RPMT08 (SRDPN2020K10 + R5 Inserts)

  • OSCARBIDE Turning Insert Holder TSDNN 2020K 12, Square Shank,Rigid Clamp, 125mm Length,10.3 Width.
  • TSDNN 2020K 12 is a new T-type double style tool holder,it can be accurately, strongly clamp the carbide insert,which is the upgraded style of DSDNN 2020K 12 turning holder.
  • Turning holder is made of Nikel Coated HSS,carbide insert is made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Our External Turning Holder which using the newly developed new double clamping structure, The clamping plate is designed with positioning, anti-turning function and high clamp Tight and rigid, high positioning accuracy, high stability, reliable Now the blade is fast, strong, accurate clamping, is straight The best choice for hole negative Angle blade clamping..
  • Used for external turning, roughing to finishing, but also for internal turning when chip evacuation is good..
Check Stock

Johnson Level & Tool 99-026K Self-Leveling Horizontal Rotary Laser System w/ Hard Case Kit, 50 x 14.5\

  • ROTARY LASER LEVEL: This Johnson Self Leveling Kit is ideal for one-person application in various indoor and outdoor jobs. Perfect for small jobsites, this rotary tool self-levels in the horizontal plane and levels manually in the vertical plane..
  • SAFETY ALARM: The rotary laser features visual and audible alarms that alert you when the rotary is beyond its leveling range and the locking pendulum that protects the inner pendulum during transportation..
  • APPLICATIONS: This rotary laser may be used to check cut and fill, set foundations and footings, concrete pours, septic tanks and basement excavations, acoustical ceiling and drywall, align and plumb walls, level deck floors, set drainage, terracing, and more..
  • ROTATIONAL SPEEDS: This manual rotary laser with illuminated vertical vial supports variable rotational speeds of 200-600 RPM. A variable RPM allows the user to set the laser to the speed that provides the optimum visibility..
  • PRODUCT SPECIFICATIONS: The kit includes a Laser with 800' working diameter, NiMH rechargeable battery pack, 6V battery charger, detector with clamp and 9V battery, tripod, 13' grade rod, wall/ceiling mounting bracket, magnetic target, tinted glasses, and hard-shell carrying case..
  • Locking compensator protects inner mechanisms.
Check Stock