Categories

Best Clamp on Scope Rings

Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)

  • Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch).
  • With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily..
Check Stock

CVLIFE 1’’ Dovetail Scope Rings for 3/8’’ or 11mm Dovetail Rails, High Profile Scope Mounts, 2Pieces

  • ✔Double dovetail rings for 3/8’’ or 11mm dovetail mount specialized scope mount for .22/Airgun..
  • ✔ The dovetail ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • ✔ High profile, 20.4mm(0.8 in) from top of the dovetail rail to bottom of rings ( Item height: 1.9'')..
  • ✔ Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • ✔ With two rail clamp screws and two scope clamp screws, Precision and Repeatable Alignment..
Check Stock

Tutengelctri 1 Scope Mount 2Pcs High Profile Scope Rings for 11mm Dovetail Rails

  • ▄︻┻┳═一 Double scope ring mount for 11mm dovetail mounts, specialized scope mount for .22/Airgun. Not for AR rifle..
  • ▄︻┻┳═一 Scope Rings Type: High Profile (0.8inch),Fit for a .22 rifle or an air rifle using a 3/8" or 11mm dovetail mount.
  • ▄︻┻┳═一 【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy & high strength steel in....
  • ▄︻┻┳═一 With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment. Scope rings are for standard....
  • ▄︻┻┳═一 Lifetime Warranty: 100% Satisfaction Guarantee.
Check Stock

wipboten Optic Scope Rings Medium Profile Scope Mounts for Picatinny/Weaver Rail

  • Double scope ring mount for 11mm dovetail mounts..
  • One of the dovetail rings features a stop pin, for rock solid application..
  • High profile, 21mm(0.8 inch) from top of the dovetail rail to bottom of rings ( Item height: 1.9 inch)..
  • The scope ring is for most scopes which are in 1 inch/ 25.4mm scope tube..
  • With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment..
Check Stock

Modkin 1'' Dovetail Scope Rings, Medium Profile Scope Mounts for 11mm Dovetail Rails - 2 Pieces (One has Stop pin)

  • ✔ Double dovetail rings for 11mm dovetail mount specialized scope mount for .22/Airgun..
  • ✔ One of the dovetail mounts features a stop pin, for rock solid application. Adopt anti-oxidation and anti-corrosion coating treatment..
  • ✔ Medium profile, 15mm(0.6 in) from top of the rail to bottom of scope rings ( Item height: 1.6'')..
  • ✔ The dovetail ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • ✔ With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment..
Check Stock

SVBONY SV185 Scope Rings, 1-inch Scope Rings, Fits All Dovetail 2-piece 1-inch Scope Mounts

  • 0.89 inches in height, from the center of the rifle scope tube to the bottom plane of the rail mount.
  • built-in tape inside per rings to prevent from marring the scope.
  • also prevent sliding and fixed position accurately.
  • with only 1 rail clamp screw and 1 scope clamp screw per side.
Check Stock

EGW Picatinny Rail Scope Mount Savage Rascal

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock

Rail Riser Mount for Red Dot Sights, Optics and Accessories, Full Size Scope Riser Mount for Scopes

  • ☑ Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • ☑ Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope..
  • ☑ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ☑ The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'').
  • ☑ With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

Wheeler Scope Mounting Combo Kit with FAT Wrench, Alignment and Lapping Bars, and Storage Case for 1 Inch and 30mm Rings

  • INCLUDES: Torque Screwdriver Wrench, 10 screwdriver bits, Wheeler Level-Level-Level, 1" & 30mm scope ring lapping bars, 1" & 30mm scope ring alignment bars, lapping bar handle, lapping compound, thread lock, and Wheeler PRLS Reticle Leveling System.
  • VERSATILE: Provides virtually everything needed to properly mount any 1-inch or 30mm scope, adjustable barrel clamp level fits around even the largest diameter barrels, including shotguns.
  • RELIABLE: Alignment and lapping of rings ensure maximum surface area contact between scope tube and rings, the barrel clamp level features non-marring pads to ensure no damage is done at the contact points.
  • ACCURACY: Reticle leveling is a key component for the accuracy of a scope set up- the Level-Level-Level helps you to do so properly.
  • EASE OF USE: Securing fasteners properly is critical to accuracy, the Wheeler F.A.T. Wrench makes it easy.
Check Stock

Monstrum Picatinny Rail Mount for Savage Accu-Trigger Model Rifles | Savage 10/11/12/14/16/110 | Short Action | 0 MOA

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock

Modkin 11mm Dovetail Scope Mounts for 1'' Scope Tube High Profile for Airguns or Premium .22 Rifles (Set of 2)

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock

Bontok 1 inch Scope Rings 2Pcs 1 inch Diameter Scope Mount Rings for Picatinny Rail 1.00 inch Height

  • 【Perfect Scope Ring Set for All 21mm Picatinny/ Weaver Rails】: Set of 2 Scope include 2 pcs low profile(0.8 inch/20.32mm). 1 inch diameter rings....
  • 【Built-In Extre Tape Protection】: Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion....
  • 【Easy to Install and Remove】:Just twist on/off the rail clamp screw nut via allen wrench and mount the base on rail. Comes with 2 pcs allen....
  • 【Solid But Lightweight Material】:Precision machining of premium 6061 aircraft aluminum alloy, both with black hard coat anodize. Sturdy but....
  • 【Precise Specification】:High quality machining to ensure ultimate accuracy for your mounting..
Check Stock

Tipton Ultra Gun Vise with Heavy-Duty & Real Avid Scope Leveling Kit & Precision Scope Level System | Complete Scope Mounting Kit for Mounting, Aligning & Leveling Rifle Scopes

  • Product 1: DIMENSIONS: 32.5 inch L x 11 inch W x 10.5 inch.
  • Product 1: EASE OF USE: All 4 feet are non-slip and independently adjustable, the tool and accessory trays are removable and the entire vise mounts directly to the benchtop (hardware not included).
  • Product 1: VERSATILE: Ball and socket articulating clamp pads allow for the pads to adapt to any firearm’s surface with height and length adjustable front and rear clamps.
  • Product 1: NON-DESTRUCTIVE: Non marring, glass filled nylon vise/clamp construction.
  • Product 2: ACCURATE: Proper Scope mounting, and alignment of your scope is critical to achieving accuracy. The Level Right Pro is a deluxe scope mounting kit designed to allow scopes to be perfectly leveled on firearms with ease..
  • Product 2: ALL YOU NEED Scope alignment leveling system attaches to square the scope to the receiver and barrel.
  • the rechargeable light projects the reticle onto the precision alignment grid to allow you to rotate the scope in the mounting rings for perfect scope alignment..
  • Product 2: INCLUDES: Level Right Pro Face Plate with Scope Saddle, Standard barrel attachment, Picatinny top rail attachment, Rechargeable Reticle Projection Light with USB Charging Cable, and the Precision Alignment Grid with Mini Tripod..
Check Stock