Best Clamp on Tailpipe Tip
Apeixoto 2.75 Inch Inlet Exhaust Tip 2.75 Inches Inlet 3.5 Inches Outlet 12 Inches Long Polished Stainless Steel Exhaust Tailpipe Tip Bolt On Design
- Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.75 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
- Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.75’’ x 3.5’’x 12’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 3 inches outlet diameter exhaust pipes..
- Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. And the tip has a cut edge with nearly 20 degree cut. It makes your vehicle look much more shinny. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
- Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
- Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check StockIFOKA 2.5 Inch Inlet Exhaust Tip , 2.5' Inlet x 3' Outlet 6 Inch Long Diesel Exhaust Tips, Stainless Steel Polished Finish Exhaust Tailpipe Extension, Clamp-on Design
- Dimension: Exhaust tips 2.5 inch inlet, 3 inch outlet, 6 inches overall length. Note: Fits tailpipe with 2.5 inches outlet diameter only, please measure the outlet diameter of your pipe before purchase.
- Material: Stainless steel with mirror polished surface treatment, anti-corrosive, high temperature resistance, and not easy to scratch & fall off. Prevent the original exhaust tailpipe from sun and rain..
- Easy to install: Cleaning tailpipe and exhaust tips, unscrew the bolt but not remove it, slide the tip into place on the tailpipe, move the clamp to a place flush with the entry port, then tighten the screw and clamps..
- Unique Driving Pleasure: Rolled edge and angled cut design, and elegant chrome can perfectly decorate your vehicle. Thicker inner waller design makes the vehicle sounds rumble and crackle, give you the unique driving pleasure..
- Rustproof Design: There is a drainage hole on the bottom of the exhaust tips, not easy to accumulate water and avoid rust effectively. In order to prolong the service life of the product, clean up once a month..
Check StockJWWY Stainless Steel Exhaust Muffler Tail Pipe Trim Cover for 2015-2022 Dodge Charger Exterior Accessories
- Package: There are two pieces of 2.5 inches inlet exhaust tips in the package..
- Specifications: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 9’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches diameter inlet exhaust pipes..
- Material: The Apeixoto exhaust tailpipe tip is constructed with 304 stainless steel. It has a much more shinny and beautiful surface. There is a blue burnt end on the tip. It looks very fashionable and powerful. This types of stainless steel also is rust and corrosion resistant. It will keep your vehicle always in a good look..
- Installation: Please be noted that these tailpipes are weld on designed. A professional installation would be recommended. Good installation will make the tailpipe function better..
- Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check StockSYKRSS Exhaust Tip Universal 2.5 Inlet 3 Outlet 12 Length Bolt Clamp On Design Stainless Steel Polished Diesel Exhaust Tail Pipe Tip
- 2.5 inch inside diameter inlet, 3 inch outside diameter outlet, 12 inch overall length. NOTE : Universal exhaust tip fit 2.5" outside diameter pipe,....
- Made of 304 stainless steel exhaust tip to avoid corrosion and deformation of the existing tailpipe, to prevent the heat back. black the lacquer that....
- Clamp on design, easy to install, no drill needed. Makes it possible to remove the exhaust tip for cleaning. If you think it isn’t tight enough,....
- Diesel exhaust tip, rolled edge and angled cut design. Perfectly decorates your vehicle. The unique styling adds a high-performance feel and look to....
- SYKRSS value your shopping experience, If you encounter any problems in installing the exhaust tail pipe tip, you can feel free to contact us via....
Check StockA-KARCK Exhaust Tip 2.5 Inch Inlet, 2.5" Inlet 4" Outlet 12" Long Black Coated Finish Muffler Tip For Truck Tailpipe, Stainless Steel Rolled Edge
- 2.5" ID MUFFLER TIP: 2.5" inlet 4" outlet 12" overall length, suitable for tailpipe with a 2.5" outside diameter..
- MATERIAL: Made of sturdy stainless steel to protect the existing tailpipe from corrosion and deformation..
- APPEARANCE: Black coating prevents rain erosion. The pure and elegant black exterior can perfectly decorate your vehicle..
- UNIQUE DESIGN: Bottom has a drainage hole, which will not affect the appearance and can drain smoothly to avoid rust..
- BOLT ON INSTALLATION: No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten with a wrench. (Please check the size of tailpipe before purchasing).
Check StockExhaust Tip 3 inch Inlet, MONOKING 3 inch Exhaust Tip Stainless Steel Black Tailpipe for Truck Cars 3' Inlet 4' Outlet 12' Long Bolt On
- EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
- POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
- DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
- BOLT ON INSTALL – Holds up long time! Direct Bolt-on, it takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
- PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.
Check StockDsycar Universal 1.5-2.25 Inch Adjustable Inlet Exhaust Tips, Bolt-On Design Chrome Plated Stainless Steel Exhaust Tailpipe Tips (Silver Curved )
- 【 Note 1 】Only fit 1.5’’-2.25’’ inlet pipes, please measure the outlet diameter of your pipe prior before purchase this exhaust tip. ( For all tailpipes, if the outlet size is 1.5 - 2.25 inch, then this exhaust tip can fit, no matter of your Year/Make/Model).
- 【 Note 2 】Please check your original tailpipe's type. Straight tailpipe is for straight type, and curved tailpipe is for curved type. This one is suitable for curved exhaust pipes. (Pay attention: This exhaust tip is oval outlet, not round outlet).
- 【 Note 3 】View product details with image,Understand the installation and size of the product, can view the other seven exhaust pipe products,Choose the right product size and your favorite color..
- 【Easy to Install】 There is no need to replace any parts,No weld needed. No drill needed.Super Easy to Install! Three Bolt Fit the tip to your Pipe..
- 【Car Decoration】Surface polishing process. More Car decoration can search Dsycar. Tips again, please measure your exhaust pipe diameter to make sure our products fit your vehicle..
Check StockAUTOSAVER88 3 Inch Inlet Black Exhaust Tip, 3' Inlet 4' Outlet 12' Overall Length Stainless Exhaust Tips Powder Coated Finish Tailpipe, Universal Fit for 3' O.D. Tailpipe, Rolled Edge, Bolt/ Clamp On
- Dimension: standard 3″ x 4″ x 12″(inlet, outlet, and overall length).
- ONLY universal fit for vehicles with 3-inch outlet diameter exhaust pipes (please make sure the Outer Diameter of your vehicle tailpipe outlet is 3″ before purchase).
- Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
- plus, a drainage hole helps drain water to prevent rust.
- Stylish & pleasant-sounding: sleek 20-degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the Black Powder Coated Finish offer your car with a elegant and mysteriou appeal.
- Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
- Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check StockAUTOSAVER88 3 Inch Exhaust Tip, 3' Inlet 4.5' Outlet 9' Overall Length Chrome-Plated Finish Tailpipe Stainless Steel Exhaust Tips for 3' O.D. Tailpipe, Rolled Edge Slant Angle Cut, Bolt On, Universal
- Dimension: standard 3″ x 4.5″ x 9″ (inlet, outlet and overall length).
- ONLY universal fit for vehicles with 3-inch outlet diameter exhaust pipes (please make sure the Outer Diameter of your vehicle tailpipe outlet is 3″ before purchase).
- Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
- plus, a drainage hole helps drain water to prevent rust.
- Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound.
- meanwhile, the chrome-plated finish would give your car a new & sporty appeal.
- Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
- Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check StockAUTOSAVER88 2.5 Inch Inlet Exhaust Tip, 2.5' Inlet 4' Outlet 9' Overall Length Chrome-Plated Stainless Steel Exhaust Tail Tip for 2.5' Outside Diameter Tailpipe, Rolled Angle Cut, Bolt-On
- Dimension: standard 2.5″ x 4″ x 9″(inlet, outlet, and overall length).
- universal fits for vehicles with 2.5-inch outside diameter exhaust tail pipe(please make sure the outside diameter of your car tailpipe is 2.5″ before purchase).
- Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
- plus, a drainage hole helps drain water to prevent rust.
- Stylish & pleasant-sounding: sleek 20-degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated finish offers your car with a bright shine and nice appeal.
- Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
- Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check StockExhaust Tip 2.5 Inlet 6 Outlet 8 Long Black Coated inish Muffler Tip for Truck Tailpipe Stainless Steel Rolled Edge 2.5 inch for A6 Black Coating 2 Pair
- 2.5" ID EXHAUST TIP: 2.5" inlet diameter 6" outlet diameter 8" overall length, universal fits 2.5" outer diameter tailpipe..
- MATERIAL: Made of stainless steel to protect the existing tailpipe from corrosion and deformation. Black coating prevents rain erosion..
- APPEARANCE: The pure and elegant black exterior can perfectly decorate your vehicle..
- EASY TO INSTALLATION:welding is required for installation,perfectly decorate the exhaust pipe of your car..
- NOTE: Only Fits 2.5 Inch Outside Tailpipe. Please check the size of your vehicles tailpipe before purchasing..
Check StockStainless Steel Car Exhaust Tip, 5.5″ Universal Exhaust Pipe, Modification Tail Throat Tail Pipe, Steel Exhaust Tips Chrome Plated Finish Tailpipe, Replacement Accessory for All Cars (Blue/Bend)
- 【High Quality】: This exhaust pipe is made of high quality stainless steel with a smooth and hard surface, does not deform easily. Compared with other pipes which is prone to rust, this one can use for a long time. The tailpipe is designed with rounded and smooth edges, which is not easy to scratch when installed. The edges are thick and curved, and the appearance is sleek and fresh, making your car look more luxurious..
- 【Stylish Decoration】: This car exhaust tip has a stylish design and is not only exquisitely made, but also has a polished and baked blue surface with attractive colors in the sunlight. It is a perfect vehicle decoration. It adds a personal touch to your car, making it even more unique compared to other cars. It also protects your exhaust pipes from rain and dust..
- 【Protect Your Exhaust Tip】: This product is installed to prevent deformation and oxidation of the exhaust pipe. Each of our stainless steel chrome muffler tip has a small drain hole at the bottom of the tip to prevent water buildup. And it is a nice sound modifier. This tip is very easy to install, built of high quality material, and looks cool with long service life..
- 【Easy to Install】: The installation is easy for you. Using the screw connection method, loosen....
Check StockStainless Steel Car Exhaust Tip, 5.5" Universal Exhaust Pipe, Modification Tail Throat Tail Pipe, Steel Exhaust Tips Chrome Plated Finish Tailpipe, Replacement Accessory for All Cars (Black/Straight)
- 【High Quality】: This exhaust pipe is made of high quality stainless steel with a smooth and hard surface, does not deform easily. Compared with other pipes which is prone to rust, this one can use for a long time. The tailpipe is designed with rounded and smooth edges, which is not easy to scratch when installed. The edges are thick and curved, and the appearance is sleek and fresh, making your car look more luxurious..
- 【Stylish Decoration】: This car exhaust tip has a stylish design and is not only exquisitely made, but also has a polished and baked blue surface with attractive colors in the sunlight. It is a perfect vehicle decoration. It adds a personal touch to your car, making it even more unique compared to other cars. It also protects your exhaust pipes from rain and dust..
- 【Protect Your Exhaust Tip】: This product is installed to prevent deformation and oxidation of the exhaust pipe. Each of our stainless steel chrome muffler tip has a small drain hole at the bottom of the tip to prevent water buildup. And it is a nice sound modifier. This tip is very easy to install, built of high quality material, and looks cool with long service life..
- 【Easy to Install】: The installation is easy for you. Using the screw connection method, loosen....
Check Stock