Categories

Best Clamped Butterfly Valve

DERNORD Butterfly Valve with Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 Inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

DERNORD Butterfly Valve with Blue Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • DERNORD Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

DERNORD 1.5 Inch Tri Clamp Clover Butterfly Valve with Trigger Handle Sanitary Fitting Stainless Steel 304 2 Pack 1.5 Inch Trigger Butterfly Valve

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

SPELAB Electric Exhaust Cutout Valve 3.0 Inch 76mm Catback Single Y Pipe with One Controller Remote Kit…

  • .... The faster the exhaust could be pushed out of the engine, the faster the combustion process could start over which give more horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. SPELAB Butt Joint Exhaust Band Clamp is recommended for installation..
  • Cutout Valve: High-quality chrome-plated steel butterfly plate and valve pipe wall thickening process. You can turn on and off from the inside of the car by remote control. Turn off the switch, keep your original, peaceful exhaust system for comfortable. Turn on the switch, you can get aggressive deep sound. The opening angle of the cutout valve can be freely controlled..
  • Working Environment: Working Voltage: 12V. Electric Exhaust Cutout Working Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. Electric Exhaust Cutout is not recommended to start work in heavy rain or extremely cold weather, the valve motor is NOT WATERPROOF..
  • SPELAB warrants the Electric Exhaust Cutout Valve Kit for 12 months warranty for quick-wear part. Include (motor, remote control, control box). We value your shopping experience and strive to offer a high-quality product and service. And if you have any other problem, contacting us and we will ....
Check Stock

The Catalyst Fermentation System - 6.5 Gallon Plastic Conical Fermenter

  • 6.5 Gallon Conical Fermenter that separates sediment, eliminates transfers and allows you to bottle straight from your fermenter..
  • The Catalyst’s tank is made from Tritan, a food-safe, BPA-free polymer. This revolutionary material retains the same clarity and smoothness of glass, but is resistant to shattering..
  • 3” Trub Trap Butterfly Valve – the largest in the industry- is designed to work with any large-mouthed mason jar, which makes catching and storing viable yeasts or separating sediment super simple..
  • Includes: 6.5 Gallon Tank with Lid, Stand (Base, 2 Legs, 2 Support Beams, 8 Screws), 3” Proprietary Butterfly Valve, Bottling Attachment, Transfer Tubing, Tubing Clamp, Rubber Stopper, 16 Oz. Wide Mouth Mason Jar, Allen Wrench.
  • Total Height (does not include airlock): 26.25" Maximum Width: 17".
Check Stock

Large, Multicolor Butterfly Balloons Foil - Pack of 6 | Big 4D Round Sphere Butterfly Birthday Balloons for Butterfly Birthday Decorations | Mylar Butterfly Balloon for Butterfly Party Decorations

  • PACK OF 6 | CREATE ENCHANTED COLORFUL BUTTERFLY THEME PARTY : Create a dreamy and fairy tale theme butterfly birthday decorations for your princess with these beautiful butterfly mylar balloons, Pack Of 6 with mainly designed around butterfly shaped and realistic details that will not only light up your theme party, also can be regarded as photography background and props for you to take beautiful selfies with your family and friends, make your party attractive with this butterfly balloon..
  • LARGE SIZE : 39 INCH | ATTRACTIVE BUTTERFLY BALLOONS WITH 4D FOIL BALLOONS : These gold foil butterfly balloons are large size of 39 Inch and 4D butterfly balloons - 22 Inch, pack of 2, Multicolor Butterfly Balloons - 39 Inch, Pack of 2 and have the shape of flying butterflies, symbolizing happiness and a new life, add fantasy and blessing to your princess fairy tale theme party, girl's birthday party and baby shower with colorful butterfly party decorations..
  • EASY TO USE | ACHIEVE MAXIMUM IMPACT : The globos de mariposas is pretty and easy to use just slowly fill the nozzle with air, when the large multi colored butterfly balloons is nearly 90% full, reduce the amount of ai....
Check Stock

LotFancy 2 Pack 28' 700x35/37/38/40/42/43c Bike Tubes, 32mm Schrader Valve, 700c Road Bicycle Tire Tube

  • 【Package Include】2Pcs 700x35c/43c Bicycle Tubes, 2 Pcs Tire Levers.
  • 【Size】This bike tire tube fits 700c tires with 35mm to 43mm diameter. So, this tube can fit 700x38c and 700x40c bike tube.
  • 【High Quality】 Our bike inner tubes are made of high quality butyl rubber material. Better air tightness, heat resistance, and durable. Suitable for most of bicycles wheels.
  • 【NOTE】Make sure inner tube match with the size of tire.
  • Inflate a little air before installment, to avoid crack or damage during installment.
  • Install the valve correctly, which must be 90° with steel, and the nut must be well locked.
  • After installment, please check the tube is at the right position between steel and tire, make sure the tubes are not clamped by them.
  • Then inflate the air according to pressure standard of tire.
Check Stock

INTBUYING Dry Powder Mixer 100L Particle Blender Powder Mixing Machine Granual Mixer 110V 26.5Gal

  • 【Wide Application】The dry powder mainly used for mixing and stirring various powdery, granular, flake, lump and viscous materials in feed, chemical, metallurgical, food and other industries..
  • 【Well Mixed】The barrel and the inner mixing blade can rotate at the same time, and the rotation direction is opposite to achieve the purpose of more uniform mixing. The barrel can be turned over 360 degrees, and there is no dead corner when mixing..
  • 【Controllable Speed】The butterfly valve type discharge port is convenient for discharging and can control the speed of discharging. The butterfly valve rubber gasket has good sealing effect and does not leak..
  • 【Durable and Stable】Thickened stainless steel cylinder, anti-corrosion, long service life.
  • high-quality copper core motor, strong power, stable and durable..
  • Voltage:110V,2.2kw.Double chain design with thicker chain and sprocket.Size: 110CM*80CM*102CM(43.3”*31.5”*40.1”)..
Check Stock

HIYITKS Air Chuck with Clip Adapter, Brass Locking Tire Inflator Nozzle Adapter Connect, No Leakage 250 PSI Tire Chucks for Vehicle Inflator Compressor Pump ConnectTool

  • ️[ No Leakage & High Efficiency ]: Just press down locking clip on tire inflator, push or twist HIYITKS tire air chuck into the valve stem until it is clamped, release the lock clip, no other tool is required, very practical and convenient. The tire inflator chuck gives you a great seal on the tire valve, it is great Air tire inflator nozzle Hose Adapter accessory..
  • [ Premium HIYITKS Tire Air Chuck With Clip Adapter ]: Each air chuck is made of heavy duty solid brass for higher strength and durability. High quality material also has excellent anti-corrosion, wear resistance yet the maximum pressure is up to 250 PSI..
  • [ Universal Fitment ]: 8mm end makes it the perfect choice for hose repairs, compatible with 8mm bore hose, Inflator Air nozzle fit for a host of vehicle tire inflator tire pump adapter , like bike, motorcycle, truck,car tire fill etc..
  • ️[ Precise Design ]: It’s well-made design with clean smooth surface, tire inflator chuck fitted for passenger and truck tire valves. Can fix regular fast connector to inflate..
  • ️[ Easy To Operate ]: Plugs open flow HIYITKS air chuck into the hose and hooks it to the valve stem. It's easy to depress and strong enough to stay in place..
Check Stock

LotFancy 2 Pack 14” x 2.125/2.40 Bike Inner Tubes, Schrader Valve (32mm), 14 Inch Bike Tube for Kids Bike, Plus 2 Nylon Plastic Tire Levers

  • 【Package Include】2Pcs 14” x 2.125/2.40 Bike Tubes, 2 Pcs Tire Levers.
  • 【Size】This 14” bike inner tube fits 14-inch wheel, tire width between 2.125 to 2.40. (Please kindly confirm that your bike tire is 14inch before you buy).
  • 【High Quality】 Our bike inner tubes are made of high quality butyl rubber material. Better air tightness, heat resistance, and durable. Suitable for most of bicycles wheels.
  • 【NOTE】Make sure inner tube match with the size of tire.
  • Inflate a little air before installment, to avoid crack or damage during installment.
  • Install the valve correctly, which must be 90° with steel, and the nut must be well locked.
  • After installment, please check the tube is at the right position between steel and tire, make sure the tubes are not clamped by them.
  • Then inflate the air according to pressure standard of tire.
Check Stock

CARPDR Tire Air Chuck with Clip Adapter Heavy Duty 8mm Clip on Tire Chuck Brass Locking Tire Chuck No Leakage Air Inflator Adapter Accessories for Inflator Compressor Pump Connect Accessories - 2Pack

  • 【Premium Tire Chuck Clip】Each air chuck is made of heavy duty solid brass for higher strength and durability. High quality material also has excellent anti-corrosion, wear resistance yet the maximum pressure is up to 250 PSI..
  • 【No Leakage & High Efficiency】Just press down locking clip, push or twist the air chuck into the valve stem until it is clamped, release the lock clip, no other tool is required, very practical and convenient. The tire inflator tire chuck gives you a great seal on the tire valve, it is great Air Inflator Hose Adapter accessory..
  • 【Universal Fitment】8mm end makes it the perfect choice for hose repairs, compatible with 8mm bore hose, fit for a host of vehicle tire inflator, like bike, motorcycle, car tire fill etc..
  • 【Easy To Operate】Plugs open flow air chuck into the hose and hooks it to the valve stem. It's easy to depress and strong enough to stay in place..
  • 【Precise Design】It’s well-made design with clean smooth surface, tire inflator chuck fitted for passenger and truck tire valves. Can fix regular fast connector to inflate..
Check Stock

CARPDR Tire Air Chuck with Clip Adapter Heavy Duty 8mm Clip on Tire Chuck Brass Locking Tire Chuck No Leakage Air Inflator Adapter Accessories for Inflator Compressor Pump Connect Accessories - 1Pc

  • 【Premium Tire Chuck Clip】Each air chuck is made of heavy duty solid brass for higher strength and durability. High quality material also has excellent anti-corrosion, wear resistance yet the maximum pressure is up to 250 PSI..
  • 【No Leakage & High Efficiency】Just press down locking clip, push or twist the air chuck into the valve stem until it is clamped, release the lock clip, no other tool is required, very practical and convenient. The tire inflator tire chuck gives you a great seal on the tire valve, it is great Air Inflator Hose Adapter accessory..
  • 【Universal Fitment】8mm end makes it the perfect choice for hose repairs, compatible with 8mm bore hose, fit for a host of vehicle tire inflator, like bike, motorcycle, car tire fill etc..
  • 【Easy To Operate】Plugs open flow air chuck into the hose and hooks it to the valve stem. It's easy to depress and strong enough to stay in place..
  • 【Precise Design】It’s well-made design with clean smooth surface, tire inflator chuck fitted for passenger and truck tire valves. Can fix regular fast connector to inflate..
Check Stock

DERNORD Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover ( 4' Tube OD )

  • Tube OD: 4 Inch, Ferrule Size: 102MM, Fits 4 Inch Tri-clamp.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA.
  • 100 Percent pressure hydraulic tested for reliability.
  • The pull style handle allows you to set the valve in three different positions simply by pulling and turning.
Check Stock