Categories

Best Class D Monoblock Amp

SOUND Q QUBED SoundQubed HDX3 Series 2000W RMS Subwoofer 12 Inch Dual 1 ohm

  • CHARGING UPGRADES REQUIRED: You will damage this amp operating it on a stock charging system. Powerful Monoblock Bass Amplifier: Puts out up to 2800W RMS @ 1 ohm with charging system upgrades (16V). Dial in the perfect tuning for your sub stage with the S1-2250.1’s subsonic and low-pass filtering. If you want to push SPL competition-level power, you can strap two S1-2250.1s..
  • Not for Everyday Stereo Systems: The S1-2250.1 is a Class D subwoofer amp for serious bassheads with serious charging systems at their disposal. This is an audio amplifier for cars with upgraded electrical systems. Know your charging specs before you buy this amp. You generally need 100 amp hours per 1000W. So, for a 2000W class D monoblock amplifier, you would need a 200 amp alternator..
  • Stays Cool as a Cucumber: Added heatsink and improved circuitry make for excellent cooling. This efficient class D monoblock amplifier design keeps more power flowing to your system instead of turning into heat, so you can play louder for longer..
  • Easy Install, even for Dummies: Set screw terminals connect easily to your power and speaker wire. Surface-mount feet make securely mounting the S1-2250.1 a cinch. To get everything you need for installation, check out the SoundQubed Zero Gauge amp kit....
Check Stock

Orion Cobalt Monoblock Amplifier – Class D Amplifier 1000W RMS 2000W Max, Car Electronics Car Audio Stereo Subwoofer 1 Ohm Stable Bass Boost MOSFET Full Range Amplifier for Car Speakers Sub Amp

  • QUALITY - This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono sub amp stand out amongst the others..
  • 1 Ohm Stable - This cobalt subwoofer amplifier for car speakers is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to operate effectively.
  • Low/High Level Inputs – The monoblock subwoofer amplifier for car stereo speakers with mosfet power supply comes with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Features – The monoblock bass boost amplifier has features like - Frequency Response: 10~250HZ, Low Pass Filter, Bass Boost, Subsonic Control, Remote Bass Knob, MOSFET Power Supply, Thermal Protection, Phase Shift.
  • Power – This Class D 2000 watt Amplifier has a power rating distribution as followed 2000 X 1 MAX @ 1 OHM. The monoblock amplifier for car speakers al....
Check Stock

TORO TECH – R6, 8000 Watts MAX – 3200 Watts RMS 0.5Ω Stable Monoblock Car Amplifier Sound Quality Class D Design, Built-in Auto Sensing Turn-On, Subwoofer Amplifier

  • CHARGING UPGRADES REQUIRED: You will damage this amp operating it on a stock charging system. Powerful Monoblock Bass Amplifier: Puts out up to 2800W RMS @ 1 ohm with charging system upgrades (16V). Dial in the perfect tuning for your sub stage with the S1-2250.1’s subsonic and low-pass filtering. If you want to push SPL competition-level power, you can strap two S1-2250.1s..
  • Not for Everyday Stereo Systems: The S1-2250.1 is a Class D subwoofer amp for serious bassheads with serious charging systems at their disposal. This is an audio amplifier for cars with upgraded electrical systems. Know your charging specs before you buy this amp. You generally need 100 amp hours per 1000W. So, for a 2000W class D monoblock amplifier, you would need a 200 amp alternator..
  • Stays Cool as a Cucumber: Added heatsink and improved circuitry make for excellent cooling. This efficient class D monoblock amplifier design keeps more power flowing to your system instead of turning into heat, so you can play louder for longer..
  • Easy Install, even for Dummies: Set screw terminals connect easily to your power and speaker wire. Surface-mount feet make securely mounting the S1-2250.1 a cinch. To get everything you need for installation, check out the SoundQubed Zero Gauge amp kit....
Check Stock

Orion Cobalt Monoblock Amplifier – Class D Amplifier 1500W RMS 3000W Max Car Electronics Car Audio Stereo Subwoofer 1 Ohm Stable Bass Boost MOSFET Full Range Amplifier for Car Speakers Sub Amp

  • QUALITY - This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place.....
  • 1 Ohm Stable - This cobalt subwoofer amplifier for car speakers is able to power loads of 1 Ohm on a continuous basis without facing any difficulties....
  • Low/High Level Inputs – The monoblock subwoofer amplifier for car stereo speakers with mosfet power supply comes with low/high level inputs. A low....
  • Features – The monoblock bass boost amplifier has features like - Frequency Response: 10~250HZ, Low Pass Filter, Bass Boost, Subsonic Control,....
  • Power – This Class D 3000 watt Amplifier has a power rating distribution as followed 3000 X 1 MAX @ 1 OHM. The monoblock amplifier for car speakers....
Check Stock

Hifonics ZG-3200.1D Zeus Gamma 3200 Watt Max Power Class D Monoblock Car Audio Amplifier

  • CLASS D, MONOBLOCK AMP: Deliver powerful sound to your speakers and subwoofers with this class D, 3,200-watt, monoblock car audio amplifier.
  • PLENTY OF POWER: Does 3200 watts x 1 channel at 1 ohm, 1600 watts x channel at 2 ohms, and 800 watts x channel at 4 ohms.
  • MINIMAL DISTORTION: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.
  • SECURE CONNECTIONS: Nickel-plated, high-temperature, impact-resistant design with hex screw terminals that allow for secure connections.
  • EASILY TIE INTO YOUR SYSTEM: Easily tie into OEM audio systems that do not offer RCA output to maximize aftermarket amplifier power.
Check Stock

New SKAR Audio RP-2000.1D 2800 WATT MAX Power Class D MONOBLOCK SUB Amplifier

  • ...comes to power and reliability. This amplifier comes with a bass knob & remote wire allowing the user full control over their bass from the front of the vehicle. This makes for a great amplifier when looking for serious power to get your system loud, and will work great on a single subwoofer a.
  • Skar Audio RP-2000.1D Monoblock Car Subwoofer Amplifier 1 Ohm Stable Class D Monoblock Subwoofer Amplifier 4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC RMS Power @ 4 Ohms: 800 Watts x 1 Channel (14.4v) RMS Power @ 2 Ohms: 1,400 Watts x 1 Channel (14.4v).
  • RMS Power @ 1 Ohm : 2,000 Watts x 1 Channel (14.4v) Max Power @ 1 Ohm: 2,800 Watts x 1 Channel (14.4v) MOSFET Power Supply Soft Turn on Circuit Frequency Response: 20Hz~250Hz Signal to Noise Ratio: 85dB.
  • Damping Factor: 150< Low Pass Filter (Variable): 50Hz~220hz Subsonic Filter: Off~50Hz Remote Bass Knob & Wire Included 1/0 Gauge Power and Ground Terminals Working Voltage: 8.5V-14.4V Fuse Rating: 200 Amp Dimensions: 17" (Length) x 6.3" (Width) x 2.2" (Height).
Check Stock

Crunch PX-2000.1D 2000 Watt Mono Powerful Car Audio Amplifier+Amp Wire Kit

  • Package: Crunch PX2000.1D + 4 Gauge Amp Kit.
  • PX2000.1D: 2000W X Series Class D Monoblock Subwoofer Amplifier.
  • POWER OUTPUT @ 1 OHM: 1 x 2000W | POWER OUTPUT @ 2 OHMS: 1 x 1000W POWER OUTPUT | @ 4 OHMS: 1 x 500W MONO BRIDGED | @ 4-OHMS: N/A.
  • Variable Voltage: 11-15VDC / Signal to noise: >98dB / Frequency Response: 20Hz-250Hz.
  • POWER TERMINAL: 12V/GND 4 GA / SPEAKER TERMINAL WIRE GAUGE: 8 GA / FUSING: 40A x 2.
Check Stock

Skar Audio RP-800.1DM 800 Watt Monoblock Class D Marine Subwoofer Amplifier

  • Marine Class D MOSFET Monoblock Power Amplifier.
  • Peak Power at 1 Ohm: 1,200 Watts | RMS Power at 1 Ohm: 800 Watts.
  • Fully Marinized with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case.
  • Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz.
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow.
Check Stock

Soundstream MR1.2000D Rubicon Nano 2000W Class D Monoblock Marine Amplifier

  • Rubicon Nano 2000W Class D Monoblock Marine amplifier.
  • High Efficiency Class D Full Range Amplifiers.
  • Hybrid Aluminum Alloy Heatsink for Optimum Dissipation.
  • 2-ohm Stereo & 4-ohm Bridged Class D Full Range.
  • MOSFET Power Supply w/ Audiophile Grade IRTM Transistors.
Check Stock

Power Acoustik OD5-3500D Overdrive Series 3,500-Watt Max 5-Channel Class D Amp

  • 2 ohm stereo and 4 ohm bridged Class D full range.
  • 2 ohm minimum impedance monoblock operation.
Check Stock

AudioPipe APCL18001D 1800W Class D Monoblock Car Audio MOSFET Amplifier

  • ... ADJUSTABLE AMP: With a full MOSFET circuit design and simple bridging operation, this big amp is also phase, subsonic, level, and low-pass-filter adjustable. The included bass remote and knob aid with quick and easy control of the bass level..
  • QUALITY MONOBLOCK AMP: Our class-D monoblock amplifier is made with high-quality SMD components and double-sided FR-4 PCB for extreme mechanical strength. This amp has overload, short-circuit, thermal, and low-voltage protection to last for the long haul..
  • ALWAYS LOUD & CLEAR: For nearly two decades, Audiopipe has been a pioneer in high-performance audio equipment. Whether you’re a beginner or an experienced audiophile, our products will perform reliably and redefine the way you experience sound..
Check Stock

SOUNDSTREAM AR1.8000D ARACHNID Series 8000w Mono Amplifier 1-Ohm Class D

  • SOUNDSTREAM AR1.8000D ARACHNID Series 8000 Watt 1-Ohm Mono Amplifier.
  • SOUNDSTREAM AR1.8000D ARACHNID Series 8000 Watt Mono Amplifier 1-Ohm Class D Amp . 1-ohm Stable Monoblock Operation for MAX Power. Bridge 2 Monoblocks Together for Double Power!. Military Grade PCB w/ PWM MOSFET Power Supply. Direct Short, Thermal, & Overload Circuit Protection. High/Speaker Level & Low Level/RCA Input. 200mV-6V Low Level RCA Input. Pre-Amp Low-Level RCA Outputs (Select Models)..
  • 4g Power Wire & 8g Speaker Wire Outputs. Variable 12dB High & Low Pass Crossovers. 12dB Bass Boost Increases Low Octave Harmonics. 1800 Phase Shift Improves Low Octave Dynamics. Dash Mount Remote Control Included. Specifications:. Max Power (Watts): 8,000. RMS Power @ 4Ω: 1,500 x 1. RMS Power @ 2Ω: 2,500 x 1. RMS Power @ 1Ω: 4,000 x 1. Remote Gain Control: Included. Low Pass Filter: 40-180Hz. Bass Boost: 0-13dB..
Check Stock

Power Acoustik BAMF1-8000W Class D Monoblock Amplifier,black

  • Die-cast aluminum-alloy heat sink for optimum dissipation.
  • 1Ω stable monoblock operation for max power.
  • MOSFET power supply with audiophile-grade IRTM transistors.
Check Stock