Categories

Best Clear Differential Covers

VHT Single ESP405007 Engine Metallic Black Pearl 11 oz.

  • Temperature 650°F (343°C) intermittent.
  • Dries to the touch in 30 minutes dries thoroughly overnight..
  • Applications headers, engine blocks, starters, brackets, water pumps, valve Covers, transmissions, differential covers.
Check Stock

Permatex 82180 Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker, 3.35 oz. Tube

  • Sensor-safe, non-corrosive formula designed for superior adhesion to oily surfaces and long term durability.
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants.
  • Temperature Range -65°F to 500°F (-54°C to 260°C) intermittent.
  • Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, and differential covers.
Check Stock

Deacon 7228 - High Temperature | Gasket Compound | Sealant | Viscous Paste | Slow Drying | Flexible Setting | Resin Base | 1 Pint

  • These Original Equipment Manufacturer (OEM) specified gaskets resist auto and shop fluids, as well as vibration.
  • Eight times more flexible than cork/composite gaskets.
  • Three times more oil resistant than conventional silicones.
  • Suggested Applications: Valve covers, oil pans, timing covers, transmission pans, differential covers.
Check Stock

DV8 Offroad | D-JP-110001-D30 | Differential Cover fits 2007-18 Wrangler JK with Dana 30 Axle | Increased Oil Capacity | Added Structural Rigidity | Tire Tread Pattern | Grey Powder Coat

  • Design - Form fitting split channel wrap with arching mount brackets that wrap the differential housing and axle tube in a second covering for additional strength and protection..
  • Added Security - Designed to be an additional barrier between your axle housing and any off-road elements that might try to cause some harm..
  • Protection - Protected in a textured powder coat finish with corrosion and UV protection additives for durability and can be left as is or sanded down and painted to match.
  • Installation - No drilling required to install along the axle but a second set of hands will be found appreciative.
  • Compatibility - Our Rear Differential Skid Plate is compatible with the 2018-2023 Jeep Wrangler JL & 2021-2023 Jeep Wrangler 4Xe. PLEASE NOTE - May not work with aftermarket large differential covers..
Check Stock

DV8 Offroad Rear Differential Skid Plate for 2021-2022 Ford Bronco | Paintable Aluminum Inserts | Quick & Easy Installation | Multiple Drain Holes | Bolt-on Installation | Black Finish

  • Upgrade - Our system will help to prevent you from getting caught up on rocks. Multiple drain holes are in several locations to release any water or mud that might collect in the skid plate.
  • Strength - Protects all aspects of your Bronco’s Rear Differential like Gasket Seal, & Pinion. In addition to protecting the full length of your Rear Axle & Upper Link Mounts.
  • Install - Utilizing the provided hardware, install is a smooth process and can be completed with 1-2 people. It takes approximately 1 hour to install. The install guide can be downloaded below!.
  • Fitment - This was engineered to work with the original factory diff covers. This may not fit with aftermarket diff covers.
  • Compatibility - DV8's Rear Differential Skid Plate is compatible with 2021 & 2022 Ford Bronco 6th Gen. Our skid plate fits all 2-door & 4-door Broncos.
Check Stock

3M Factory-Match Seam Sealer, 08323, Black Color, Two-Part, Medium/High Viscosity Urethane, 200 mL/6.75 fl oz Cartridge

  • Sensor-safe, non-corrosive formula designed for superior adhesion to oily surfaces and long term durability.
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants.
  • Temperature Range -65°F to 500°F (-54°C to 260°C) intermittent.
  • Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, and differential covers.
Check Stock

Serger Essentials: Master the Basics and Beyond!

  • Gail Yellen´s classes are where even advanced sewers turn to master their sergers, and in this book, her invaluable class info is available 24/7/365. Advice on threading, tension, differential feed,and needles is relevant to all models. Tips for using decorative threads result in masterful finishes, and no one covers the cover stitch like Gail. The book has 128 pages and 300 color illustrations..
  • Features: Handy Tips & Tricks explain common handling errors and how to avoid them. Specialty Serger Feet Section details the different serger feet available and when to use them. 5 simple projects put your new serging knowledge into practice. Cover stitch overview complete with decorative and construction techniques. Quick Reference Guide lets you quickly find the machine settings for popular stitches..
  • Advice on threading, tension, differential feed and needles relevant to all models: tips for using decorative threads that result in masterful finishes, cover stitch and more-it's all here in Serger Essentials!.
  • 128 Pages - 12/25/2015 (Publication Date) - Interweave (Publisher).
Check Stock

Permatex 82194 Ultra Grey Rigid High-Torque RTV Silicone Gasket Maker, 3.5 oz. & 82180 Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker, 3.35 oz. Tube

  • Product 1: Designed specially for high-torque and high vibration applications.
  • Product 1: Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids.
  • Product 1: Low odor and non-corrosive formula.
  • Product 1: Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings.
  • Product 2: Sensor-safe, non-corrosive formula designed for superior adhesion to oily surfaces and long term durability.
  • Product 2: Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants.
  • Product 2: Temperature Range -65°F to 500°F (-54°C to 260°C) intermittent.
  • Product 2: Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, and differential covers.
Check Stock

Taidacent THS4131 Fully Differential Input/Output Low Noise Amplifier Module Single Ended to Differential Single Ended Input Double Ended Output

  • Name: THS4131 Fully Differential Amplifier Size: 45mm X 34mm Supply Voltage Range: 5V Single Supply ±15V Dual Supply.
  • This module can implement single-ended to differential, single-ended input, and double-ended output. Has high performance, low noise, wide power supply voltage range and other advantages..
  • The THS413x consists of a true fully differential signal path from input to output. This design produced excellent common-mode noise suppression wells that improved total harmonic distortion..
  • Chip features High performance 150 MHz - 3 dB bandwidth (VCC = ±15V) 51V/us slew rate -100dB third harmonic distortion (250kHz) 2. Low noise 1.3 nV/vHz Input Reference Noise Differential input/cent output Balanced Output Suppresses Common Mode Noise Reduce second harmonic distortion from dry differential output.
  • Wide supply voltage range VCC-5 V Single Supply to ±15V Dual Supply ICC (SD) = 860 u A Shutdown Mode (THS4130) Chip application Single-ended to differential conversion Differential ADC Driver Differential antialiasing Differential transmitters and receivers Output Level Translator.
Check Stock

Yukon Rear Nodular Iron Differential Cover for 8.5' GM with 5/16' Bolts (YHCC-GM8.5-S)

  • Rear Nodular Iron Cover with 5/16" SAE Cover Bolts.
  • Thick walled design and durable powder coat finish.
  • Designed and Engineered for Performance Applications and extreme conditions.
  • These covers come with a durable powder coat finish, magnetic drain plug, quality gasket and high strength steel fasteners for easy bolt-on installation..
  • Yukon Hardcore Differential Covers are made from thick-walled high strength nodular steel to fend off the most extreme hits in off road driving..
Check Stock

Taidacent AD8130 Differential Receiver Amplifier Module Differential to Single-ended High Common-mode Rejection Ratio Low Noise Low Distortion

  • Name: AD8130 Differential Amplifier Size: 43mm X 38mm Supply voltage range: ±5V~±12V.
  • The differential-to-single-ended amplifier, which has a 270-MHz bandwidth and a very high common-mode rejection ratio (CMRR) at high frequencies, can also be effectively used as a high-speed instrumentation amplifier or to convert a differential signal to a single-ended signal..
  • Differential amplifiers can process single-ended inputs as interactive differential outputs or treat differential inputs as differential outputs. These amplifiers have two independent feedback loops that control the differential and common-film output voltages, respectively..
  • Chip features 1. High speed AD8130: 270 MHz, 1090 V/us (G= +1) AD8129: 200 MHz, 1060 V/us (G= +10) 2. High Common Mode Rejection Ratio (CMRR) 94 dB (minimum, DCE100 kHz) 80 dB (minimum, 2 MHz) 70 dB (10 MHz) 3. High input impedance: 1 MQ differential 4. Low noise AD8130: 12.5 nV/Hz AD8129: 4.5 nV/vHz.
  • 5. Input common mode range: ±10.5V 6 low distortion, 1V peak-to-peak (5 MHz): AD8130, -79 dBc (Worst Harmonic, 5 MHz AD8129, -74 dBc (Worst Harmonic, 5 MHz) 7. User adjustable gain G= +1 without external components 8. Supply Voltage Range: +4.5V to ±12.6V 9. Power saving mode.
Check Stock

J-B Weld 8297 HighHeat 500 Degree Epoxy Putty-2 Pack

  • HI TEMP SILICONE GASKET MAKER & SEALANT: Is an RTV Silicone gasketing material, designed for use in mechanical assemblies where continuous....
  • WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest....
  • EASY TO USE: Curing when the product is exposed to the moisture in air, it forms a tough, waterproof seal on most surfaces. It will not shrink or....
  • VERSATILE & DEPENDABLE: Ideal for automotive, metal, oil pans, exhaust manifolds, water pumps, timing covers, differential covers, drive housings and....
  • DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the....
Check Stock

DV8 Offroad | Rear Differential Skid Plate for 2018 - Current Wrangler JL | Fits Dana 44 Axle | Pumpkin and Tube Protection | 100% Bolt on Installation | SPJL-10

  • FITMENT: Compatible with 2018 - Current Jeep Wrangler JL.
  • ADDED SECURITY: Designed to be an additional barrier between your axle housing and any offroad elements that might try to cause some harm.
  • DESIGN: Form fitting split channel wrap with arching mount brackets that wraps the differential housing and axle tube in a second covering for additional strength and protection.
  • BUILT TO LAST: Manufactured from precision cut, machine bent steel for strength then robotically welded for rigidity.
  • EVERLASTING BEAUTY: Protected in a textured powder coat finish with corrosion and UV protection additives for durability and can be left as is or sanded down and painted to match.
  • SIMPLE INSTALLATION: No drilling required to install along the axle but a second set of hands will be found appreciative.
  • INSTALLATION NOTE: May not work with aftermarket large differential covers.
Check Stock