Categories

Best Clear Gas Line

IKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace

  • INCLUDES EVERYTHING FOR INSTALLATION - This Gas Appliances Installation Kit Includes 22” flexible gas line (with 1/2" Female Flare on both end) , 3 different adapters (1/2" Male Flare x 1/2" Male Pipe, 1/2" Male Flare x 3/8" Male Pipe & 1/2" Male Flare x 3/8" Female Pipe), 1/2" brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install..
  • HIGHLY DURABLE & LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
  • CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
  • BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
Check Stock

MRbrew Efficient Adjustable Beer Faucet Kit, Adjust/Control/Regulate Beer Flow Rate, Heavy Duty Commercial Brewing Kegging Stainless Core Adjustable Draft Kegerator Keg Tap Kit for Beer Tower Shanks

  • 1.Include: Beer Keg CO2 Regulator CGA320, Red Gas Line, Worm Clamps, 5/16" Swivel Nuts, Ball Lock Gas Disconnect MFL.
  • 2.Material: PVC Material for Gas Line, Stainless Steel Material for Clamps, CO2 Regulator and Swivel Nuts, Plastic Material for Ball Lock Disconnect.
  • Connect tips: Tighten the Clamps when it Connects the Beer Gas Line will guarantee no Leak.
  • 4.Gas Gauge: 0-60 PSI and 0-3000 PSI, Manual pressure release valve releases extra pressure at 45 PSI, help you get correct pressure reading, always keeps you safe when you operate regulator.
  • 5.Guarantee: Quality Guarantee, any problem for CO2 Regulator with ball lock and gas line set, Money Back or Replacement free..
Check Stock

Bulbrite 473060 - 2PK - 60W - T3 - Candelabra Base - 120V - 2700K - 3,000Hrs - Dimmable - Clear - Krypton/Xenon Bulbs

  • ...eiling fixture will emit a perfect amount of light that is not too dim and not too harsh. They're also fully adjustable meaning you can control the ambience of your room..
  • MULTIPLE USES: Perfect for line voltage torchiere lamps, pendants, ceiling fixtures and portables. Available in a variety of wattages, as well as clear and frost finishes for different lighting effects. The clear glass offers direct light while frost diffuses the light..
Check Stock

Best Brose 3/4 Tubing Pipe KIT 33ft,Corrugated Stainless Steel Tubing with 2 Male Fittings 33

  • 【Sturdy material 】-The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch....
  • 【SIZE】 -Length 33FT, 3/4" "pipe size: 16mm inner diameter x 20mmOD (0.625" inner diameter x 0.787 "outer diameter)，Underground gas piping....
  • 【INSTALLATION POSTIONS】- gas line For use with Natural Gas and Liquid Propane applications，Connects any outdoor NG appliance to the gas supply....
  • 【SCOPE APPLICATION】For use with Natural Gas and Liquid Propane applications，propane fire pit，Natural gas fire pit，gas range，water heater.
  • 【MEASILY BEND AROUND CORNERS】- Corrugated Stainless Steel Tubing is great for installation of gas appliances. easily snakes into attic and....
Check Stock

Best Brose 1/2 Tubing Pipe KIT 70ft,Corrugated Stainless Steel Tubing with 2 Male Fittings 70

  • 【Sturdy material 】-The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch....
  • 【SIZE】 -Length 66FT, ½ "pipe size: 12mm inner diameter x 16mmOD (0.48" inner diameter x 0.63 "outer diameter)，Underground gas piping systems.
  • 【INSTALLATION POSTIONS】- gas line For use with Natural Gas and Liquid Propane applications，Connects any outdoor NG appliance to the gas supply....
  • 【SCOPE APPLICATION】For use with Natural Gas and Liquid Propane applications，propane fire pit，Natural gas fire pit，gas range，water heater.
  • 【MEASILY BEND AROUND CORNERS】- Corrugated Stainless Steel Tubing is great for installation of gas appliances. easily snakes into attic and....
Check Stock

Slime 40069 Inflation Station, Garage Inflator, Pro-Series, Wall Mounted Air on Demand, Flat to Full in 4 Minutes, Cars, Trucks, Bicycles, 120V,Black

  • ...e: 12mm inner diameter x 16mmOD (0.48" inner diameter x 0.63 "outer diameter), so Our natural gas hose can provide up to 100,000 BTU/hour of Flow Capacity, and provide sufficient airflow for larger sizes equipment to meet your more needs..
  • 【Application 】- Gas line Used to Connects any indoor/outdoor Natural Gas or Liquid propane applications to the gas supply piping, such as fire pit gas tube, gas range pipe, water heater gas hose,Generator gas tube,Compressor gas tube,Grill gas line.etc.
  • 【Sturdy material 】- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, Comes with a 1/2" MALE Brass fittings on both end, Standard Male and Female Pipe Threads for easy connections..
  • 【Flexible and Safety】- Corrugated Stainless Steel Tubing is flexible and can be cut into any length you need,easily snakes into attic and basements areas, around corners and bends, Using one-piece molding exquisite Craft, There is no interface in the middle of the pipe body, reducing the connection point and preventing gas....
Check Stock

EXCELFU Flexible Dryer Gas Hose Dryer Gas Appliance Line Connector with Fittings Compatible with 1/2' OD 1/2' MIP x 1/2' FIP Hose Connection, Stainless Steel(6 Feet)

  • Hose Fittings are compatible with 1/2" MIP and 1/2" FIP, it can create a secure metal connection for heavy-duty use.
  • Designed for gas dryer: This 72" Flexible Stainless Steel Gas Appliance Line is not universal, it is mainly designed for gas dryers and not for ovens or ranges.
  • Product Parameters: Inner dimensions of this line are 3/8", Outside dimensions of this line are 1/2".
  • Corrugated design: This gas line hose with corrugated design can achieve full flexibility, it snaked into small spaces including corners and bends easily.
  • Easy to install: No tools need to install the piping. It come with male and female iron pipes for easy connections. Make sure you are in need of 1/2 gas piping otherwise this will not fit.
Check Stock

Gas Connector Kit 24 inch Yellow Coated Stainless Steel, 3/8” OD Flexible Gas Hose Connector for Gas Log and Space Heater, 1/2" FIP x 3/8" MIP Stainless Steel Fittings, 24” Gas Appliance Supply Line

  • FOR SPACE HEATER AND GAS LOG. This stainless steel gas line hose has a 40,000 BTU capacity, designed as a gas connector for space heaters/gas logs. 24 in. long with a 3/8” outer diameter and 1/4” inner diameter. Includes a 1/2" FIP x 3/8" MIP stainless steel fitting..
  • CORRUGATED DESIGN FOR FULL FLEXIBILITY. A corrugated gas appliance gas connector offers maximum flexibility, as the corrugated design makes for a flexible gas hose by allowing to bend and snake the yellow coated gas line connector into small spaces, bends, and corners..
  • REINFORCED HEAVY-DUTY QUALITY: Our gas supply connectors are quality tested and CSA certified, to serve you faithfully for years to come. Gas hose withstands 30 bends without leakage and 15 applications of 90 degree twists. Works in temperatures up to 800 degrees. Fittings create a leak-free seal within a torque of 1,040 inch-pounds..
  • EASY INSTALLMENT: No special tools required to install this gas connector. Includes stainless steel corrosion-resistant fittings with threaded end connections which easily connect to your gas supply line, and create a secure, leak-free seal..
Check Stock

Weed Warrior Autowinder II Universal Fit String Trimmer Replacement Bump Head

  • Autowinder II Bump Head: Replace the bump head of your gas-powered or cordless weed trimmer.
  • This replacement part lets you easily load string trimmer line without opening the head by inserting the line and cranking the bump knob.
  • Universal Fit: Bump head replacement part is equipped for both gas and cordless trimmers.
  • Accommodates up to 16 feet of and fits 80/1000-inch to 105/1000-inch diameter line.
  • Universal Fit: Compatible with nearly all brands of gas and cordless string trimmers including Echo, Stihl, Husqvarna, Redmax, Ryobi, Cub Cadet, Weed Eater, Poulan, MTD and more.
  • Professional Grade: Find the right replacement parts for your trimmer or weed whacker.
  • Our brand-compatible trimmer line, fixed line, bump feed, hybrid and bladed heads are built to the high standards and demanding needs of professional landscapers.
  • Weed Warrior: We manufacture high quality universal fit weed wacker trimmer line, heads, and accessories built for extreme toughness through years of detailed research and development both in the lab in in the field.
Check Stock

Keg Kit with 5 Gallon Ball Lock Keg, 5 lb Aluminum CO2 Cylinder, Regulator, and All Accessories

  • ... 15 Feet Tubing for Multiple Keg Dispensing: compared to other brewing hose kits, MRbrew co2 gas dispensing hose features a great length of 15 feet, you can apply this hose to your sankey keg tap system and cornelius ball lock kegging system simultaneously by cutting this 15 feet hose, this pretty long homebrew gas line can be cut into multiple sections to meet your mutiple kegging needs perfectly..
  • Can be Easily Cut by Cutting Tool: the short length brewing hose kit can not be cut and it can not be applied to your multiple keg dispensing process simultaneously, or the fixed hose fitting kit comes with extra fittings and you need to spend extra money, this 15 feet gas line can be cut into any length to meet your needs, you can can equip it with your own brewing dispensing parts, brings great convenience and creative possibilities for your multi-kegging brewing dispensing system..
  • Powerful No Leaking Pressure Transferring Tubing: the inside diameter of this great long kegging dispensing hose is 7mm, thick enough hose wall prevents the gas tubing kinks and maintains hose shape stability, smoothly transmit gas without leakage with the help of hose clamps. you can attach this kegerator hose to the beer barb fitting connector that has an outside diameter of....
Check Stock

PERA 3/16 pin lock MFL beer line assembly & 5/16 pin lock gas line assembly for home brewing

  • Liquid Line Include: Pin Lock Liquid Disconnect MFL, Swivel Nuts, Beer Hose ID 1/4” OD 5/16” Length 3ft, 2 PCS Free Beer Hose Clamp, Picnic Tap,....
  • Gas Line Include: Pin Lock Gas Disconnect MFL, Swivel Nuts, Gas Hose ID 5/16” OD 9/16” Length 5ft, 2 PCS Free Beer Hose Clamp, Already Assembly.
  • Use: The Assembled Pin Lock Beer Line used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
  • Multi-Usage, carbonated seltzer water, home brew, different beverage, outdoor picnics, keg cleaning.
  • Guarantee: Quality Guarantee, any problem for Pin Lock Line, Money Back or Replacement free..
Check Stock

Stainless Steel keg Coupler Ball Lock Posts Adapter,Sankey keg to Ball Lock Quick Disconnect post,Fits to D Type Keg Coupler FPT 5/8 Thread Stainless Steel Gas & Liquid Post for Homebew

  • 【Food Grade Material】Made of food grade 304 stainless steel instead of chrome plated , which let our keg coupler adapter kit more healthier/ environmental/anti-corrosion/no rust/durable. 2pcs Silicone gaskets are for free..
  • 【Two Way to Identify Gas &Liquid Post】 The Gas Post has a subtle etched line around the top of the base (the liquid post has no etched line).The flaring of the metal on the liquid side is much wider than the gas side.
  • 【Quick & Easy To Convert】This Keg Coupler Adapter can combined with ball lock quick disconnect set that will convert the sanke style keg into a Cornelius style Ball Lock keg( easy to toggle between commercial and homebrew beers).
  • 【Hand Or Plier To Install】Can install our ball lock keg conversion kit in 5/8 thread S-style &D-style keg coupler to use.You can use hand or the plier to lock each side grooves,then tighten the posts. Don’t over tighten to avoid deforming the washer.
  • 【Easy To Clean 】To clean this keg coupler adapter kit , you can infuse the clear water into your beer keg to operate one time just like exporting beer.Don’t suggest you take apart this conversion kit,cuz it is very difficult to reinstallation.
Check Stock

PTFE Yellow Gas Line Thread Sealant Tape 260

  • DURABLE - Our Gas line tape holds strong in temperatures from -450F to 500F. Will last a lifetime!.
  • HIGH QUALITY - Meets and exceeds MIL-T-27730A specifications..
  • SAVE TIME - Made for Gas Lines, Natural Gas or Propane Line, our tape will keep your threads sealed..
  • EASY TO USE - Heavy Density and Anti-Seizing, our tape is easy to apply and easy to remove!.
  • SATISFACTION GUARANTEED - Satisfied or your money back!.
Check Stock