Categories

Best Clear Heat Shrink Tubing

Pointool Heat Shrink Tubing Kit-Wire Shrink Wrap Tubing Wire Heat Shrink Tube Kit Insulation Electrical Colored Assorted Heat Shrink Tubing Assortment Electronics for Wires Shrink Ratio2 1,650Pcs

  • MULTIPLE SIZES AND COLORS-Contain any size you may need for anything from professional repair to DIY work at home, so the shrink tube is very convenient when working with different size wires. You may not use these wire shrink wraps a lot, but when you do, there's always a size that comes in handy. This heat shrink tubing kit affords wide variety of sizes and colors, especially the smaller size which hardest to find..
  • SHRINK QUICKLY, DURABLE and EVENLY-This shrink tube is well made of high quality material, thick and durable. Cover the area with them and shrinking them with a heat gun, then the wire shrink wraps will wrap the wire tight and evenly within 10 seconds. With this heat shrink tubing kit you will become more confident in your soldering work..
  • EASY TO USE-You can just shink the shrink tube with a lighter or hair dryer when you don't have a heat gun on hand. Of course, if you'd like to use the heat shrink tubing kit more professional, standard heat gun will be much better lol. The wire shrink wraps are all pre-cut into the most common sizes you'll need which makes your work a lot faster..
  • KEEP ORGANIZED-The heat shrink tubing comes in a nice compact case and the semi-modular container keeps each size separately. You can throw the heat shrink tu....
Check Stock

ELECFUN 3/8in Heat Shrink Tubing 3:1 Large Marine Heat Shrink Tube Dual Wall Adhesive Shrinkable Wire Wrap Tube, Fully Insulation (4 Feet Black Tubing, and 4 Feet Red Tubing)

  • Package: 5pcs 0.8ft Black 3/8inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall, and 5pcs 0.8ft Red 3/8inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation..
  • Dual Wall Tube & Safer: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

10pcs 6 Gauge 6 AWG x 5/16” Pure Copper Cable Lug Terminal Ring Connectors with Dual Wall Adhesive Lined Red + Black Heat Shrink Tubing – by WNI

  • Includes pure copper cable lugs + black & red heavy duty dual wall adhesive lined heat shrink tubing. Use selection tabs to choose cable lug gauge/stud size and package quantity..
  • Pure copper cable lugs are designed to fit solid or stranded cable. Cable can be crimped or soldered to cable lug..
  • Cable lug utilizes a closed end design to keep moisture and other contaminants from entering and degrading or corroding the copper cable. Flared cable lug entry hole allows for the easy insertion of cable..
  • Dual wall, polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 1.5 inches of heat shrink tubing per cable lug (half black and half red).
  • Heat shrink tubing shrink ratio is approximately 3 to 1 (shrinks to 1/3 of its original diameter). Heat shrink tubing ratings: Temperature: -55°C to 105°C Voltage: 600V.
Check Stock

10pcs 2/0 Gauge 2/0 AWG x 5/16” Pure Copper Cable Lug Terminal Ring Connectors with Dual Wall Adhesive Lined Red + Black Heat Shrink Tubing – by WNI

  • Includes pure copper cable lugs + black & red heavy duty dual wall adhesive lined heat shrink tubing. Use selection tabs to choose cable lug gauge/stud size and package quantity..
  • Pure copper cable lugs are designed to fit solid or stranded cable. Cable can be crimped or soldered to cable lug..
  • Cable lug utilizes a closed end design to keep moisture and other contaminants from entering and degrading or corroding the copper cable. Flared cable lug entry hole allows for the easy insertion of cable..
  • Dual wall, polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 1.5 inches of heat shrink tubing per cable lug (half black and half red).
  • Heat shrink tubing shrink ratio is approximately 3 to 1 (shrinks to 1/3 of its original diameter). Heat shrink tubing ratings: Temperature: -55°C to 105°C Voltage: 600V.
Check Stock

Wirefy 1-1/2\ Heat Shrink Tubing - Large Diameter - 4:1 Ratio - Adhesive Lined - Industrial Heat-Shrink Tubing - 50 Feet Roll - Black

  • 4:1 SHRINK RATIO - Recovers to 1/4 of its original diameter, and makes a tight seal. Highest heat shrink ratio on the market..
  • GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection. This creates waterproof and long-lasting insulation..
  • EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Make professional insulated connections in seconds..
  • DUAL WALL TUBING - Provides enhanced protection from wear and tear. Marine grade tubing is resistant to fluids, heat, and mechanical stretch..
  • 1-1/2" (40.0mm) SHRINK TUBING DIAMETER - Get the exact diameter you need. 50 Feet of shrink tubing will last through many projects..
Check Stock

100 Pcs Clear Heat Shrink Butt Connectors, 26-24 AWG Marine Grade Insulated Crimp Wire Connectors, Waterproof Electrical Connectors Butt Splice for Boat Truck Wiring

  • Tinned Copper Core: Butt connectors use a heavy-duty copper core, strong crimp, higher conductivity..
  • Package Includes: 100 Clear heat shrink butt connectors that can be used on wire AWG from 26 to 24..
  • Solderless Crimping: Insert the wires to be connected, crimp both sides with crimping pliers, and then heat with a heat gun..
  • 3:1 Shrink Ratio: Marine grade heat shrink tubing provides high tensile strength and enough hot melt adhesive inside the tubing to ensure waterproof performance, your wires will never slip out of the wire connectors..
  • Wide Application: Wire connectors are durable, stable, waterproof, and corrosion resistant and are used in the automotive, marine, electrical, and electronic industries..
Check Stock

Wirefy 1/4\ Heat Shrink Tubing - 3:1 Ratio - Adhesive Lined - Industrial Marine Heat Shrink Tubing Roll - Black - 50 Feet Roll

  • 3:1 SHRINK RATIO - Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough..
  • GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection. This creates waterproof and long-lasting insulation..
  • EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Make professional insulated connections in seconds..
  • DUAL WALL TUBING - Provides enhanced protection from wear and tear. Industrial grade tubing is resistant to fluids, heat, and mechanical stretch..
  • 1/4 INCH (6.4mm) SHRINK TUBING DIAMETER - Get the exact diameter you need. 50 Feet of shrink tubing will last through many projects..
Check Stock

650pcs Heat Shrink Tubing Black innhom Heat Shrink Tube Wire Shrink Wrap UL Approved Ratio 2:1 Electrical Cable Wire Kit Set Long Lasting Insulation Protection, Safe and Easy, Eco-Friendly Material

  • Safe and Environmental Friendly Material Shrink Wrap: Conform to UL224, CSA C22.2, RoHS standard. Electrical heat shrink tubing material composition does not contain heavy metal and other environmentally hazardous substances. No slowly or long-term virulence. No need to worry about your health when using innhom heat shrink wrap..
  • Premium Quality Heat Shrink Tubing Set: Excellent flame retardant (UL 224, VW-1) and insulation performance. Soft and flexible wire shrink wrap, low shrinkage temperature-minimum shrinkage temp: +158℉(+70°C), fast shrinkage, easy and convenient to use with a heat gun..
  • Effective and Long Lasting Protection: innhom heat tube shrink has the advantages of good tightness, acid and alkali resistance, durable and anti-aging. Shrink wrap wire tensile strength: 14 Mpa. Dielectric strength: 003e20kV/mm. Elongation at break: 003e400%. Volume resistivity: 003e1.0× 10^14Ω.cm. Cold-resistant bending -22℉(-30 °C) × 1h without cracking. Use innhom heat shrink tubes instead of ugly and short-lived electric tape..
  • Functional Wire Shrink Wrap Tubing: Covers all gauges of heat shrink wires you'll need in RC hobbies and many other applications. innhom heat shrink tubing assortment is mainly used in wire connection, rust prevention and cor....
Check Stock

Industrial Heat Shrink Tubing Kit,AIRIC 300pcs 3:1 Heat Shrink Tube Adhesive Lined - Dual Wall Tube - Marine Heat Shrink Tubing Black, 7 Sizes(Diameter): 3/4, 1/2, 3/8, 1/4, 3/16, 1/8, 3/32 inch

  • 7 Sizes: Industrial heat shrink tubing kit includes 7 most commonly used diameters ranging from 3/32" to 3/4". The length of heat shrink tube is precut to 45mm..
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Safer Dual Wall Tube: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing industrial can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

2 Pcs 1/2 inch (Diameter) Heat Shrink Tubing, 3:1 Adhesive-Lined Large Heat Wire Shrinkable Tube by MILAPEAK (4 Feet, Black & Red)

  • ★ Premium Wire Protector: Our heat shrink tubes are perfect for appliance/auto electric wire cable harness wrapping, which will be exposed to harsh environments. They can be also used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
  • ★ Safe & ECO-Friendly: Our heat shrink tubes are UL certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, protect you and your family. Round diameter: 1/2'', Length: 1.22M(4Ft)..
  • ★ Good Tightness with Glue Lined: Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you DIY..
  • ★ Fast & Easy Use: Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection. It is 3:1 heat shrink ratio, and wi....
Check Stock

MILAPEAK 180 PCS Heat Shrink Tubing Kit - 3:1 Ratio Adhesive Lined, Marine Grade Shrink Wrap - Industrial Heat-Shrink Tubing - Black

  • ★ Good Tightness with Glue Lined: Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you DIY. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
  • ★ Multiple Sizes: 180pcs black high-quality marine heat shrink tubing for your choose, various sizes can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc..
  • ★ Tidy Connection: Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection..
  • ★ Safe & ECO-Friendly: Our heat shrink tubes are both UL certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, protect you and your famaily from toxins..
  • ★ Fast & Easy Use: Our heat shrink tubing was pre-cut to 3.5 inches, it is 3:1 heat shrink ratio, and will shrink up to 1/3 of or....
Check Stock

10 pcs 8 AWG 8 Gauge Butt Splice Connector Pure Copper Tin Coated Marine Grade Uninsulated - by WindyNation

  • Includes AWG splice butt connectors (use selection tabs to choose gauge size and quantity desired) + black dual wall adhesive lined heat shrink tubing (2 inches of heat shrink tubing per connector).
  • Butt connectors are made of pure copper with excellent electrical conductivity. Tin plated for corrosion resistance. Perfect for marine environments and outdoor use..
  • Dual wall polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 2 inches of heat shrink tubing per connector..
  • Designed to fit solid or stranded wire. Easily connect spliced cables to connectors for a non-insulated seamless connection. Connectors can be crimped or soldered. .
Check Stock

Ancor 320125 Heat Shrink Step Down Butt Connector 22-18/22-14 AWG - 25 Pieces

  • 4: 1 shrink ratio tubing to ensure a watertight seal between wires.
  • Flared barrel with uniform copper wall ensures an easy and proper mechanical crimp.
  • Crimp indicator on barrel for proper placement of installation tool.
  • Clear heat shrink tubing ensures crimp accuracy.
  • Colored stripes on the barrel indicate which crimp die to use, regardless of application.
Check Stock