Hoist Electric Winch Electric Lifting Traction Hoist 3 in 1 Wireless Control 7.6m/25ft Wire Control Manual Control Overhead Lift with Overload Protection Blue Color 110V (500kg)
- NO TYING OFF REQUIRED - The "Tie Boss" patentened Jam cleat allows for one hand operation. Whenever hoisting or lowering, when the rope is released the Jam cleat will clamp the rope at that location. To release just give a slight tug at an angle and it releases similar to Veneitan Blinds.
- USE TOGETHER OR SEPERATELY - The system comes with 2 pulleys and 1 3/8 inch Heavy Duty Tie Boss Jam cleat. The pulleys can be used all together in a 2 pulley system or additional pulleys can be added if more mechanical advantage is needed. The Tie Boss Jam cleat can also be used speartely as a tie down or store up..
- STRONG DURABLE CONSTRUCTION: The block and tackle is rated for 300 lbs. The Jam cleat is made of durable nylon. Each pulley is small enough to be portable but large enough to keep the rope on track and prevent tangles during storage..
- LIMITED LIFETIME WARRANTY - We offer a Lifetime warranty on all parts with the exception of the rope..
Check Stock2 PCS Tie Down Bed Cleat PT278-35112, PT278-35160 Compatible with Toyota Tacoma 2005-2021,Toyota Tundra 2007-2021, Jeep Gladiator 2020 2021, Ram 1500 2019-2021 Fits for Deck Rail System Truck
- Each bed cleat holds a maximum of 110 pounds.
- each tie-down bed cleat measures approximately 6 x 1.
- Fully adjustable, each tie-down bed cleat slides along the Tacoma bed rail system using a spring-loaded, twist/locking clamp to hold it in place.
Check Stock
SPEEDWOW Bed Tie Down Anchors Brackets Box Link with Plates Compatible with 2015-2021 F150 F250 F350 FL3Z99000A64B FL3Z-9928408-AB
- Compatible with 2015 2016 2017 2018 2019 2020 2021 F150 F250 F350 and Raptor Models. Replace OE# FL3Z99000A64B or FL3Z-9928408-AB. Direct replacement for a proper fit every time..
- PREMIUM QUALITY - The Box Link Tie Downs with keys and plates is constructed of die-cast zinc with heavy-duty ABS plastic housing and stainless steel lock assembly. Black powder anticorrosive coating, you don't need to worry about the rain or other matters to make them rusted..
- EASY TO INSTALL-- It is very easy to install and you can complete it within 15 minutes. The installation procedure is at the follows: 1.Take your Box Link cleat, unlock it, and line it up with the insert.
- 2.Pull out on the bottom of the cleat, and slide the top insert up into place.
- 3.Once in the desired position, use the special keys to lock the cleat into place..
- WIDE RANGE FOR USE - The tie down anchors are heavy-duty 1000 lb rings, they are ideal to add tie down points for a truck and let you far away from cargo's swing and noise..
- SPEEDWOW provide Bed Tie Down Anchors Brackets Box Link have a 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check StockMxeol Black Folding Boat Cleats Flip Up Cleat Stainless Steel 4-1/2 inch W/Fasteners (Matte Black Coating, 4 Packs)
- Black Folding cleats boat 4-1/2 inch marine stainless steel with back plate and fasteners. Two color options: Mirror Polished Silver and Matte Black Coating.
- Black flip up cleats dock tie down 4.5 inch can be tied off for mooring, The distance is 2.68" / 68mm from center to center of two holes.
- Boat cleat folding black stainless steel 4-1/2 inch, Aisi 316 stainless steel.
- Stainless steel cleat fold down cleats 4.5 inch flip up cleat marine hardware for boat, dock, and kayak.
- 4 Packs flip up boat cleats black are recessed cleat, raised height: 1-1/2", recessed height: 1/2".
Check Stock
VEITHI 6inch 316 Stainless Steel Folding Cleat Boat Dock Flip Up Cleat Rope Cleat w/Fasteners (4 Pack)
- 【High-quality Materials】Boat surface mount dock edge flip up cleat folding cleats made of 316 stainless steel casting, durable and high strength.flip up dock cleats 6 inch maximum corrosion resistance and durability in the saltwater environment, folding boat cleat rope cleat work for dock lines,mooring and etc..
- 【Exquisite Workmanship】Our stainless folding boat cleat is high polished surface, precise, bright and with good flatness.for mirror-like appearance to match marine uses watercraft/boat/yacht,boat docks, decks, piers for tying up boats, kayaks.all of our boat cleats 6 inch folding products are strict tested to ensure the best quality..
- 【 Flip up dock cleat size】These folding cleats for boats pop up locks down when not needed, and springs up when use it.The stainless boat cleat overall Length 6",the total Width 2-1/8",raised Height 1-3/4", recessed Height 1/2",Bolt hole spacing 3-3/8" (center to center)..
- 【Collapsible Design】These folding cleats for dock simply fold-down when not in use and flip back up when it comes time to tie off. the fold away feature be a great design, eli....
Check Stock
VEITHI Boat Cleats 6 inch (4 Pack) - Electrophoretic Coated Boat Dock Cleats Black, Rope Cleat, Anchor Line Cleat,Dock Cleats with Hardware for Decks, Piers for Tying up Boats, Marine Decor
- Electrophoretic Coated Black Dock Cleats-These are well durable iron nautical cleats and corrosion resistant, Include 4 boat cleats with 8 bolts and nuts ready to use indoor and outdoor.These can hold their own against the weather..
- Hexagonal Hole for Easy Installation - Boat tie down cleats bolt will stay in place when securing the cleat. no more holding the bolt with one hand and tightening with the other..
- Wide Footprint for Strength- These black boat cleats for dock lines large bottom footprint for additional strength,Perfect as cleat hook for boat docks, decks, piers for tying up boats, kayaks and jet ski's..
- Size&Hardware- These dock cleats black 6 inch L x 1.3 inch H ,base measures 2.2 inch x 0.9 inch.
- mounting holes 1.25 inch center to center,boat cleats with hardware - M6x 3.25 inch(83mm) black bolts and nuts included, perfect size to fit any use, bolts can be cut if needed..
- Home Nautical Decor- Boat dock cleats 6 inch make your home stand out.
- perfect for maritime, beach, garden, pool, coastal decorations.
- use them as cabinet pulls, boat cleat towel rack, rustic coat hanger, curtain tie-backs, nautical coat hooks.boat cleat wall hook,boat cleat hooks..
Check Stock
Amarine Made 4 Pack of 6 Stainless Folding Cleat, Flip-up Dock Cleat Retractable Cleats-Enhance Safety and Appearance of Any Boat
- Rough Cast Hot Dipped Galvanized Iron -These are well durable galvanized cleat, 100% protected against rust. include 4 boat cleats with 8 bolts and nuts ready to use indoor and outdoor.these can hold their own against the weather..
- Hexagonal Hole for Easy Installation - Boat tie down cleats bolt will stay in place when securing the cleat. no more holding the bolt with one hand and tightening with the other..
- Wide Footprint for Strength - Boat dock cleats 6 inch large bottom footprint for additional strength,perfect as cleat hook for boat docks, decks, piers for tying up boats, kayaks and jet ski's..
- Size&Hardware- These dock cleats 6 inch L x 1.3 inch H ,base measures 2.2 inch x 0.9 inch.
- mounting holes 1.25 inch center to center,boat cleats with hardware - M6x 3.25 inch(83mm) bolts and nuts included, perfect size to fit any use, bolts can be cut if needed..
- Home Nautical Decor- Galvanized boat cleats 6 inch make your home stand out.
- perfect for maritime, beach, garden, pool, coastal decorations.
- use them as cabinet pulls, boat cleat hooks for towels, rustic coat hanger, c....
Check Stock
Boat Cleats 8 inch (2 Pack) - Electrophoretic Coated Boat Dock Cleats Black, Rope Cleat, Anchor Line Cleat,Dock Cleats With Hardware Ideal for Boat Docks, Decks, Piers for Tying up Boats, Marine Decor
- Dock Cleats 8 inch Black- These are well durable iron nautical cleats and corrosion resistant, Include 2 boat cleats with 4 bolts and nuts ready to use indoor and outdoor.These can hold their own against the weather..
- Hexagonal Hole for Easy Installation - Boat tie down cleats bolt will stay in place when securing the cleat. no more holding the bolt with one hand and tightening with the other..
- Wide Footprint for Strength- These black boat cleats for dock lines large bottom footprint for additional strength,Perfect as cleat hook for boat docks, decks, piers for tying up boats, kayaks and jet ski's..
- Size&Hardware- These black dock cleats 8 inch L x 1.9 inch H ,base measures 2.8 inch x 1.2 inch.
- mounting holes 1.65 inch center to center,boat cleats with hardware - M8x 4.1 inch bolts and nuts included, perfect size to fit any use, bolts can be cut if needed..
- Home Nautical Decor- Boat dock cleats 8 inch make your home stand out.
- perfect for maritime, beach, garden, pool, coastal decorations.
- use them as cabinet pulls, boat cleat hooks for towels, rustic coat hanger, curtain tie-backs, nautical coat hooks.boat cleat wall hook,boat cleat hooks..
Check Stock
VEITHI 316 Stainless Steel Boat Folding Cleats 5 inch Flip up Dock Cleat for Deck and Boat Dock Cleats Folding Cleat Rope Cleat Boat Cleat with Fasteners 4 Pack
- 【High-quality Materials】Boat surface mount dock edge flip up cleat folding cleats made of 316 stainless steel casting, durable and high strength.flip up dock cleats 5 inch maximum corrosion resistance and durability in the saltwater environment, folding boat cleat rope cleat work for dock lines,mooring and etc..
- 【Exquisite Workmanship】Our stainless folding boat cleat is high polished surface, precise, bright and with good flatness.for mirror-like appearance to match marine uses watercraft/boat/yacht,boat docks, decks, piers for tying up boats, kayaks.all of our boat cleats 5 inch folding products are strict tested to ensure the best quality..
- 【 Flip up dock cleat size】These folding cleats for boats pop up locks down when not needed, and springs up when use it.The stainless boat cleat overall length 5",the total width 1-3/4",raised height 1-1/2", recessed height 3.5/8",Bolt hole spacing 2-3/4" (center to center)..
- 【Collapsible Design】These folding cleats for dock simply fold-down when not in use and flip back up when it comes time to tie off. the fold away feature be a great design, eliminate a tripping hazard. the folding boat cleats stainless steel folded down so swimmer would not be hurt when go ashore and diving off the dock.smooth ed....
Check Stock
VEITHI 316 Stainless Steel Boat Folding Cleats 5 inch, Flip up Dock Cleat for Deck and Boat, Dock Cleats Folding Cleat Rope Cleat Boat Cleat with Fasteners (2 Pack)
- 【High-quality Materials】Boat surface mount dock edge flip up cleat folding cleats made of 316 stainless steel casting, durable and high strength.flip up dock cleats 5 inch maximum corrosion resistance and durability in the saltwater environment, folding boat cleat rope cleat work for dock lines,mooring and etc..
- 【Exquisite Workmanship】Our stainless folding boat cleat is high polished surface, precise, bright and with good flatness.for mirror-like appearance to match marine uses watercraft/boat/yacht,boat docks, decks, piers for tying up boats, kayaks.all of our boat cleats 5 inch folding products are strict tested to ensure the best quality..
- 【 Flip up dock cleat size】These folding cleats for boats pop up locks down when not needed, and springs up when use it.The stainless boat cleat overall length 5",the total width 1-3/4",raised height 1-1/2", recessed height 3.5/8",Bolt hole spacing 2-3/4" (center to center)..
- 【Collapsible Design】These folding cleats for dock simply fold-down when not in use and flip back up when it comes time to tie off. the fold away feature be a great design, e....
Check StockPROGRIP 840820 Trailer Transport and Truck Bed Tie Down Anchor Point: Fold Down Rope Cleat (Pack of 2)
- Trailer and truck bed anchor that acts as the foundation for proper tie down technique.
- Ideal for construction workers or truck vehicle owners.
- Multi use rope cleat machined from solid aluminum, allowing corrosion resistance.
- Spring loaded cam tightly grips and secures rope up to 3/8" diameter while rope cleat mounts to the stake pocket of most equipped pick-up trucks.
- Pack of 2, Anchor Point Rope Cleats fold down flat and tucks into stake pocket when not in use.
Check Stock
VEITHI Dock Cleats 6 inch 4 Pack - Hot Dipped Galvanized Boat Cleats Rope Cleat Anchor Line Cleat Boat Dock Cleats Ideal for Boat Docks Decks Piers for Tying up Boats Kayaks Marine Decor
- Rough Cast Hot Dipped Galvanized Iron -These are well durable galvanized cleat, 100% protected against rust. include 4 boat cleats with 8 bolts and nuts ready to use indoor and outdoor.these can hold their own against the weather..
- Hexagonal Hole for Easy Installation - Boat tie down cleats bolt will stay in place when securing the cleat. no more holding the bolt with one hand and tightening with the other..
- Wide Footprint for Strength - Boat dock cleats 6 inch large bottom footprint for additional strength,perfect as cleat hook for boat docks, decks, piers for tying up boats, kayaks and jet ski's..
- Size&Hardware- These dock cleats 6 inch L x 1.3 inch H ,base measures 2.2 inch x 0.9 inch.
- mounting holes 1.25 inch center to center,boat cleats with hardware - M6x 3.25 inch(83mm) bolts and nuts included, perfect size to fit any use, bolts can be cut if needed..
- Home Nautical Decor- Galvanized boat cleats 6 inch make your home stand out.
- perfect for maritime, beach, garden, pool, coastal decorations.
- use them as cabinet pulls, boat cleat hooks for towels, rustic coat hanger, curtain tie-backs, nautical coat hooks..
Check StockByredio Bed Tie Down Anchors for Ford F150 F250 F350 2015-2021 Truck Cargo Bed Tie Downs Boxlink Cleats with Plates, Replacement for FL3Z99000A64B FL3Z-9928408-AB
- ...and let you far away from cargo’s swing and noise..
- ✅ANTI-THEFT – The f150 bed tie downs also comes with 4 stainless steel locks and keys. The F150 tie down anchors secure and holds the things on the inside of your truck bed tightly for additional cargo tie-down points. It can be used with the locking tie-down cleat, tie-down hooks strap, etc together. It makes your truck more productive and safe..
- ✅EASY TO INSTALL – The ford tie down anchors are made to be installed in seconds and require the use of no special tools, drilling, or any hassles. Just put it to the right positions of your truck bed, use a screws twist to tighten the 4 holes. Fits for Ford turcks with removable tie down anchors..
Check Stock
