Categories

Best Closetmate Motorized Tie Racks

Newstar - 2ZKF5 - Type 20 Steel Service Spring Chamber with Black Powder Finish

  • ?SOFT ROOF RACKS?The soft roof racks specially designed for carrying surfboards, sail boards, kayaks, boats, paddleboards and snowboards. And can be expandable cargo carrier for cars without roof racks..
  • ?FIT MOSTLY VEHICLES?These soft roof bars have ultra strong and long straps which allow the roof bars universal fit mostly vehicles, such as sedan car, SUV, MPV, Crossover and etc. Please notice that these roof racks do not fit cars with curtain airbags..
  • ?EASY TO INSTALL IN MINUTES?Place the roof racks on the car roof top and let the long straps loop around the roof of your vehicle and tie down the metal buckles..
  • ?EVA FOAM?The light weight EVA foam allows you to take these roof racks during travel with a rent car!.
  • ?NO DEFORMING?The car roof rack offers an effective way to carry surf board, kayaks as well as stand up paddle board.The soft rack will secure a kayak or board from your cars roof, preventing it from deforming.?.
Check Stock

VEVOR Rack Ratchet (2\ OD Round Pipe)

  • Effortless Installation: The ladder rack ratchet can be either bolted or welded. It is complete with bolt mounting hardwaret. 2 Inches OD round pipe steel..
  • Thoughtful Design: The rubber pad reduces friction between the machine and the ladder rack ratchet strap, which reduces damage to the machine surface. Widen the diameter of the handwheel to save more effort, tighten forward and lock backward..
  • Ratchet Tie Down: The rack ratchet with strap adopts a smooth ratchet structure, which is used for one-way drive and is commonly used in manual winches to prevent reversal. The ladder rack ratchet is made of alloy steel with a 1,000 lbs capacity for high durability..
  • 9" Polyester Strap: The ladder rack tie-down straps are equipped with an extended ribbon to increase cargo the loading range of cargo volume. The length of the strap is similar to that of the same product. Strap length: 9 ft / 274 cm..
  • Wide Application: Ladder tie-down straps are used for ladder racks and truck racks. Perfect for tying down cargo and lumber. The frame can be welded or bolted onto the rack. It is suitable for a variety of mounting styles, ideal for almost any rack..
Check Stock

ClosetMaid 1217 Over-The-Door Tie and Belt Rack, White

  • Fantastic tie racks for men closet - a great gift idea or for keeping your closet tidy, organized and looking great..
  • Stylish - Natural wood tie hanger for closet will match any bedroom décor, with a light varnish and polished chrome hooks to maintain a top quality finish.
  • Space Saving - 24 swivel hooks which fold inwards, making this neck tie organizer slim and better for maximizing your closet space.
  • Not just a tie and belt rack - initially designed as the perfect hanging tie rack, this hanger is incredibly versatile and multi-purpose popularly used for belts, tank tops, necklaces and face masks!.
  • Fathers Day Gift Idea - Presented in an attractive display box, this tie hangers for men closet is supplied by Hangerworld, a trusted clothing care brand - high quality guaranteed..
Check Stock

NIUBEE Belt Organizer Acrylic 5 Layers Belt Case Storage Holder and Display for Accessories like Jewelry,Watch,Bracelets

  • SEPARATE BELT HOLDER - This is a 5-layer belt storage rack. Each box has a lid. There is a magnet on the box. When you remove the upper layer, the....
  • EASY TO SEE - Transparent design, you can see the inside clearly, when you match your clothes, you can find the belt you need very accurately, no....
  • DUST-PROOF - It is a box, protecting your collection. Prevent dust from getting close to your belts or jewelry, and you don't need to worry about the....
  • STURDY AND CLEAR - It is stronger than we thought. It is not as cheap as plastic, It is made of acrylic material, which is very clear. You will like....
  • MULTI-PURPOSED - Closet storage racks, belt storage racks, watch cases, jewelry storage racks, bow tie display racks, cosmetic boxes, office supplies....
Check Stock

Thule AirScreen XT Wind Fairing , M (38\),Black

  • This Red rubber bike rack hitch and Durable, UV resistant yet soft rubber cradle straps quickly secure your bicycle in place and work with a wide range of tube sizes.These bike car rack accessories make your bike will be held tightly. No need to worry about whether your bike will fall while driving.
  • The tie-downs straps used on various Racks trunk, sedans, hatchbacks, minivans, SUV's, hitch and spare tire bike racks. The saddle is adjustable and its spacing can accommodate bicycles of various frme sizes and designs.
  • Wide Compatible Accessories: This spare hook ladder design fits many carriers with protruding attachment knobs.This bike rack straps replacement is easily and safety on your bike. Attaches to cradles with protruding attachment knobs.
  • This replacement cradles for bike rack are designed to be installed quickly and without tools, side straps for increased lateral stability. 1 1/4 and 2 inch receiver hitches, with no wobble bolt, Tie down cradle system individually secures and protects bikes.
  • Contains 6 bike spare hook and 6 ladder-style straps, Diameter of tube: 1". It will fit tubes of 1 inch diameter.
Check Stock

Richards Operated/Black Homewares Motorized Tie Rack with LED Lights – Rotating with Batteries – Hold up to 64 Ties and 8 Belts – Standard Rods Good for Most Closet Types

  • MOTORIZED - The Tie/Belt Rack rotates so your tie selection can be made in seconds. There are two buttons that allow the tie rack to rotate in either direction. When rotating, a LED light comes on to help see so you can choose the perfect tie for the day. Each tie hook is smooth and has a raised ending to keep ties in place..
  • ORGANIZE 64 TIES OR BELTS- The perfect solution to organize your tie collection quickly. Organize ties by Holiday, Seasonal, Stripes, Foulards, Paisleys, Plaids, Polka Dots, Bow Ties, solids or by color. So easy to find the perfect tie for any occasion. There are 4 belt hooks underneath the unit to easily hold 8 belts..
  • PERFECT GIFT - Great gift for the tie collector or someone just starting out in the professional world. Father’s Day, Graduation, Birthdays, Anniversaries or Christmas..
  • EASY INSTALLATION- The Revolving Tie Rack securely mounts to standard closet rods. The top screws allow adjustability for most closet rods. Belt hooks fit into a slot and turn to lock into place. Dimensions are approx. 5.5” H x 15” W x 6” D. Uses 4-C batteries (not included). The battery compartment is on top so batteries are easy to replace without taking the unit off the rod..
Check Stock

SHOPCraft 12 Pan 5\ Spacing Commercial Aluminium Bun Racks, NSF Listed Heavy Duty Speed Rack for Bakery, Restaurant & Catering, 12 Tier 20.5\ x 26\ x 70\ Speed Rack with Heavy Duty Plate Casters

  • Unmatched Quality: The SHOPCraft TX-125 Pan Rack is made from commercial grade aluminum. The racks have a higher gauge aluminum construct that make them stable and durable than other cheaper market offerings. A SHOPCraft rack will last you a lifetime. The trusted choice for serious bakeries, restaurants and foodservice companies..
  • For Industrial & Commercial Use: The SHOPCraft TX racks are meant for heavy use. The racks are built to withstand heavy usage around the clock, unlike other racks that eventually breakdown, our racks are built for life. The TX end load rack is designed to hold standard 18” X 26” bakers sheet or bun pans. Rack total capacity is 350 Lbs. This rack has 12 tiers with 5" spacing..
  • Heavy Duty Casters: The non-marring 5” X 1 ¼” wide polyolefin wheels will sustain the most demanding environments. The gusset points that tie the rack together are designed to provide stability and strength when loaded to full capacity..
  • Design & Function: Atheistically pleasing, it is constructed of heavy gauge aluminum sheet. The TX rack by Schaumburg Specialties incorporates a heavy duty plate caster that will out preform the typical stem caster commonly used on other racks. The racks are easy to wipe down after a day of heavy use..
Check Stock

Bed Deck Rails Cleat T Slot Nuts Fits Screws with 3/8'-16 Thread 4PCS,Stainless 3/8-16 X 1 Hex Head Bolts 4PCS,Tie Down Anchors Rings Trailers Hook Cargo Bolt 4PCS for Toyota Tundra & Toyota Tacoma

  • 100% QUALITY MATERIAL:T Slot Nuts are made from 100% 304 Stainless Steel for the best corrosion resistance available,protect the T-Slot Nuts from rust. Tapped through for 3/8"-16 threads for use with d-rings, racks, tie downs, custom cleats and more.Hex Head Bolts are made from 304 Stainless Steel.tie down anchors are made of quality steel and they are fully welded triangular rings, which make the bolts sturdy and work for a very long time..
  • WIDELY USED:Mount extra custom cleats,tie downs,d-rings,bike racks and more! With a 3/8"-16 fully tapped and threaded hole, the possibilities are endless as to what you can attach.The tie down anchors are heavy duty 1000 lb rings,for securing ratchet rope, cam buckle straps, bungees cords,they are ideal to add tie down points for a truck, trailer ,SUV,boat to carry heavy loads, and let you far away from cargo swing and noise..
  • EFFECTIVELY:These T-slot nuts are perfectly compatible with bed rails in both Toyota Tundra (TM) and Toyota Tacoma (TM), but also work with a variety of other pickup trucks with compatible bed rails.By threading a screw or bolt through the 13/32" diameter bolting hole( (that's between 3/8" and 7/16")..
  • PACKAGE INCLUDES:T Slot Nuts with 3/8"-16 Thread 4 PCS,3/8-16 X 1" Hex Head Bolts 4PCS,Tie D....
Check Stock

HANGERWORLD Hanging Tie Holder Organizer Rack - Premium Wooden Tie Hanger with 24 Folding Accessory Hooks for Closet Space Saving

  • Fantastic tie racks for men closet - a great gift idea or for keeping your closet tidy, organized and looking great..
  • Stylish - Natural wood tie hanger for closet will match any bedroom décor, with a light varnish and polished chrome hooks to maintain a top quality finish.
  • Space Saving - 24 swivel hooks which fold inwards, making this neck tie organizer slim and better for maximizing your closet space.
  • Not just a tie and belt rack - initially designed as the perfect hanging tie rack, this hanger is incredibly versatile and multi-purpose popularly used for belts, tank tops, necklaces and face masks!.
  • Fathers Day Gift Idea - Presented in an attractive display box, this tie hangers for men closet is supplied by Hangerworld, a trusted clothing care brand - high quality guaranteed..
Check Stock

Wood Tank Top Hanger with 24 Hooks, Large Space Saving 360° Rotating Foldable Metal Hooks Clothes Organizer Tie Rack for Bras Scarfs (Wood)

  • SECURE: Securely holds your tie, belt or scarf collection and is a huge space saver by holding 20 of your ties, belts or scarves. The tie rack is a helpful closet organizer..
  • VERSATILE: The tie organizer is no just for ties, but can be a belt organizer or scarf organizer. Stop having to sift through a bundle of ties and organize them with our tie hanger..
  • DURABLE: The high quality finish of the tie racks wood will not disappoint. The smooth finish to the dark oak wood adds an added elegance to show off your tie collection. The tie holder will look fantastic in your closet..
  • EASY: Every tie is accessible at every angle. No need to struggle with moving the hangers around to find your tie. With 360 degrees of access the perfect tie awaits!.
  • WE COUNT WITH AMAZING CUSTOMER SERVICE: We want to make sure you love your closet organizer. Please reach out with any feedback you may have, we love hearing from you. We typically respond within 24/48 hours..
Check Stock

Umo Lorenzo Premium Wooden Necktie and Belt Hanger, Walnut Wood Center Organizer and Storage Rack with a Non-Slip Finish - 20 Hooks

  • SECURE: Securely holds your tie, belt or scarf collection and is a huge space saver by holding 20 of your ties, belts or scarves. The tie rack is a helpful closet organizer..
  • VERSATILE: The tie organizer is no just for ties, but can be a belt organizer or scarf organizer. Stop having to sift through a bundle of ties and organize them with our tie hanger..
  • DURABLE: The high quality finish of the tie racks wood will not disappoint. The smooth finish to the dark oak wood adds an added elegance to show off your tie collection. The tie holder will look fantastic in your closet..
  • EASY: Every tie is accessible at every angle. No need to struggle with moving the hangers around to find your tie. With 360 degrees of access the perfect tie awaits!.
  • WE COUNT WITH AMAZING CUSTOMER SERVICE: We want to make sure you love your closet organizer. Please reach out with any feedback you may have, we love hearing from you. We typically respond within 24/48 hours..
Check Stock

SHOPCraft 20 Pan 3 Spacing Commercial Aluminium Bun Racks NSF Listed Heavy Duty Speed Rack For Bakery Restaurant & Catering 20 Tier 20.5 x 26 x 70 Speed Rack With Heavy Duty Plate Casters

  • Unmatched Quality: The SHOPCraft TX-203 Pan Rack is made from commercial grade aluminum. The racks have a higher gauge aluminum construct that make them stable and durable than other cheaper market offerings. A SHOPCraft rack will last you a lifetime. The trusted choice for serious bakeries, restaurants and foodservice companies..
  • For Industrial & Commercial Use: The SHOPCraft TX racks are meant for heavy use. The racks are built to withstand heavy usage around the clock, unlike other racks that eventually breakdown, our racks are built for life. The TX end load rack is designed to hold standard 18” X 26” bakers sheet or bun pans. Rack total capacity is 350 Lbs. This rack has 20 tiers with 3" spacing..
  • Heavy Duty Casters: The non-marring 5” X 1 ¼” wide polyolefin wheels will sustain the most demanding environments. The gusset points that tie the rack together are designed to provide stability and strength when loaded to full capacity..
  • Design & Function: Atheistically pleasing, it is constructed of heavy gauge aluminum sheet. The TX rack by Schaumburg Specialties incorporates a heavy duty plate caster that will out preform the typical stem caster commonly used on other racks. The racks are easy to wipe down after a day of heavy use..
Check Stock

SHOPCraft 10 Pan 6 Spacing Commercial Aluminium Bun Racks NSF Listed Heavy Duty Speed Rack for Bakery Restaurant & Catering 10 Tier 20.5 x 26 x 70 Speed Rack with Heavy Duty Plate Casters

  • Unmatched Quality: The SHOPCraft TX-106 Pan Rack is made from commercial grade aluminum. The racks have a higher gauge aluminum construct that make them stable and durable than other cheaper market offerings. A SHOPCraft rack will last you a lifetime. The trusted choice for serious bakeries, restaurants and foodservice companies..
  • For Industrial & Commercial Use: The SHOPCraft TX racks are meant for heavy use. The racks are built to withstand heavy usage around the clock, unlike other racks that eventually breakdown, our racks are built for life. The TX end load rack is designed to hold standard 18” X 26” bakers sheet or bun pans. Rack total capacity is 350 Lbs. This rack has 10 tiers with 6" spacing..
  • Heavy Duty Casters: The non-marring 5” X 1 ¼” wide polyolefin wheels will sustain the most demanding environments. The gusset points that tie the rack together are designed to provide stability and strength when loaded to full capacity..
  • Design & Function: Atheistically pleasing, it is constructed of heavy gauge aluminum sheet. The TX rack by Schaumburg Specialties incorporates a heavy duty plate caster that will out preform the typical stem caster commonly used on other racks. The racks are easy to wipe down after a day of heavy use..
Check Stock