Categories

Best Clutch Disc Cg125

Apollo DB-X18 125cc Dirt Bike Blue

  • 125cc Apollo Dirt Bike,4 Stroke, Single Cylinder CARB Complaint and Approved for California.
  • 4 Speed Manual Clutch, Front/Rear Hydraulic Disc Brakes.
  • Front/Rear 17"/14'' Wheels, Seat Height 36.5".
  • Air Cooled,Kick Start,6.5 kw/7500 rpm Max Power.
  • Please make sure to add a working PHONE NUMBER for delivery appointment..
Check Stock

Yamaha 250 Beartracker Atv Electric Winch with Wire in and Out

  • The Apollo DB-X18 125cc Dirt Bike features disc brakes, a 4 speed manual tranny and heavy-duty twin spar frame. The motorcycle comes with a 17 inch front wheel and over 13 inches of ground clearance.
  • 4 Speed Manual Clutch . Front and Rear Hydraulic disc Brake and Tires (front/rear): 2.5-17 / 3.0-14 Wheels (front/rear): 17 inch / 14 inch Spoke Rims.
  • Seat Height: Wheel base: 34" 1220 Front/Wheel Base: 17" Rear Wheel: 14" Tank Capacity: 1.24 gallons.
  • PLEASE NOTE : Please add a working PHONE number to your order on Amazon so that shipping company can call you for DELIVERY appointment..
  • Ground Clearance: 13.5 inches Wheelbase: 48 inches.
Check Stock

SR Performance Clutch Alignment Tool; 10 Spline

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 1-3/4 inch O.D. shaft, 1 inch pilot, 10 splines.
Check Stock

X-PRO 125cc Dirt Bike Pit Bike Gas Dirt Bikes Dirt Pitbike 125cc Gas Dirt Pit Bike Green

  • Moto Pro brings 125cc Gas Dirt Pit Bike..
  • Semi-auto Clutch is the perfect choice for riders stepping into the 125 class..
  • 14" front and 12" knobby rear wheels get ready for great traction on a variety of tracks and terrain..
  • Front and Rear Hydraulic Disc Brake. 420 Gold Chain w/ 14T Front & 41T Rear Sprocket..
  • Some assembly required: Assembly for dirt bikes include Handle bar brackets, wheels, brakes, number plate and fender. (May differ per model).
Check Stock

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.
Check Stock

Motion Pro 14-0530 Polished OEM Style Clutch Lever

  • T6061 Aluminum alloy，Surface Finish with Anodized, 100% Brand New, High Quality, durable.
  • Fits most street bikes and motorcycles with cable clutch, such as Ducati、Kawasaki、SUZIKI 、YAMAHA and so on.Fits all the handlebar are 7/8‘’ 22mm,fits 110cc 125cc 140cc TTR 125cc SSR Xmotos Apollo 125 pit dirt bike.
  • Reduce 80% of the clutch lever resistance, make it easier to be pulled.
  • Short Clutch Lever For Stunt, Only need 1 or 2 Fingers to Hold.
Check Stock

ClutchXperts SPC Clutch Alignment Tool KIT Compatible With 2006-2015 Mazda MX-5 Miata 2.0L 6-Speed

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 7.3 inches long.
Check Stock

Apollo DB-X18 125CC RFZ Racing Dirt Bike, Twin Spare Heave Duty Steel Frame (Green)

  • APOLLO Dirtbike for Youth and adults Engine Type:4 Stroke, Single Cylinder 125 CC.
  • Transmission:4 Speed Manual Clutch.Starter:Kick Start. (Twin-Spare Tubular Frame).
  • Please Note : Please add a WORKING PHONE number for delivery appointment. Your order cannot be shipped without a working phone number..
  • Max Speed:55 mph May vary depending on road condition, rider weight etc..
  • Front and Rear Hydraulic disc. /Wheel Base: 17" Rear Wheel: 14".
Check Stock

MOTOKU Drive Belt for Polaris Trailblazer 250 330 Trail Boss 350L Worker 500 Xplorer 400 ATV UTV Quad

  • ★Save your choice time: A clutch kit that meets your driveline needs eliminates the time and effort required to find the right model (and the risk of buying the wrong model)..
  • ★You will get: 1*clutch Assembly 1*Variator Assembly 1*Gates 743 belt, You only need to confirm the corresponding engine or model. These three parts are applicable in sets..
  • ★High quality clutch:19 Splines Inside The Clutch Drum/Bell OD of Drum: 136mm；ID of Drum: 125mm ID of spline area: 14.4mm；Pulley Diameter: 140mm；Fits GY6 125cc and 150cc 4-Stroke Engine.
  • ★The Belt is made of high heat-resistant and high-strength materials：Belt key parameter 743x20x30, Premium belt provides longer durability for applications..
  • ★Variator Assembly for gy6 150cc：Roller Size：18*14mm Drive Face Size:Spline Shaft 19 teeth.
  • Hole Diameter 15mm Variator Size:Diameter 108mm.
  • Variator Pin OD 24mm ID 15mm；Fit GY6 125cc&150cc 152QMI 157QMJ Engine.
Check Stock

QISF 2Pcs Magneto Flywheel Puller 24mm & 27mm and 20mm & 24mm Clutch Lock Nut Spanner Tool for Motorcycle ATV Dirt Bike Scooter Repair Tool

  • 【Function】-- Clutch plate hub nut spanner tool designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch.Another Used for removal of the flywheel or rotor if applicable..
  • 【Fits】 Flywheel Puller for GY6 50CC 125CC 150CC Yamaha Honda Suzuki KTM ATV scooter dirt bike.
  • Clutch lock tool for 50cc-125cc Honda Motorcycle ATV Dirt Bike Go Kart Pit Bike 4 Wheeler.
  • 【Flywheel puller Size & Material】-- Stator magneto flywheel puller with 2 sizes:24mm&27mm.
  • 【Clutch lock Size】-- Clutch lock tool Inner Diameter(upper): 20mm.
  • 【Package includes】-- 1×Magneto Flywheel Puller, 1×Clutch lock tool.
Check Stock

Complete Tractor 1112-5989 Clutch Kit Brown

  • Specs: Clutch Kit, Type: Single, Disc Outside Diameter: 10", Spline Count: 15, Includes: Pressure plate, disc, release bearing, pilot bearing and....
  • Compatible with/Replacement for Ford/New Holland: NDA7550B, NDA7563A.
  • Compatible With / Replacement For: Ford/New Holland 1801 Indust/Const.
  • 100% New aftermarket Clutch Kit built to meet OEM specifications for Ford/New Holland.
Check Stock

22mm Dirt Bike Front Brake Disc Rotor Guard Cover Protector Compatible with 125 150 200 250 300 450 505 525 530 SX SX-F XC XC-F EXC EXC-F 2016-2021, for Husqvarn.a 125-501 All 2016-2021

  • CNC Aluminum Front Brake Disc Guard Protector, PREVENT the Front Brake Disc from being hurt by sand and gravel.Extend the service life of the Front Brake Disc..
  • Fitment: 22mm, Compatible with 125-530 (125 150 200 250 300 450 505 525 530) SX/SX-F/XC/XC-F 2015-2021, 125-530 (125 150 200 250 300 450 505 525 530) EXC/EXC-F 2016-2021, Compatible with Husqvarn.a 125-501( TC/FC 125-450, TE/FE 125-501, TX/FX 125-450…… ) All 2016-2021.
  • Replacing the stock parts to make them look better. Lightweight but high strength and durability.
Check Stock

Schaeffler LuK RepSet 02-028 Clutch Kit OEM Clutch Replacement Kit

  • OEM Clutch Replacement Kits: Our clutch kits suit a huge variety of vehicles, including Cars, Trucks, SUVs,Vans, Motorcycles, & Scooters, as well as....
  • Replacement Clutch Kit: As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. Each OEM....
  • Complete Clutch Kit: This clutch repair kit comes with replacement drive train parts for clutches, and each LuK RepSet is 100% functionally tested,....
  • LuK RepSet: This package of clutch replacement components contains everything you need to get the job done right, a new clutch, disc, and related....
  • Our LuK clutch replacement parts can be used for various models of Cars, Trucks, SUVs,Vans, Motorcycles, & Scooters, as well as ATVs & UTVs. Please....
Check Stock