Categories

Best Clutch For 38mm Tube

Rockville RVMIC3 Tripod Microphone Stand with Quick Release Hand Clutch & Boom

  • Rockville RVMIC3 Professional Tripod Microphone Stand With Quick Release Hand Clutch and Boom..
  • One-hand adjusting using the hand-clutch system (no need to turn knobs to adjust!)..
  • This mic stand is the easiest and quickest to adjust on the market!.
  • Leg joint is made out of aluminum (almost all other brands use plastic)..
  • The stand tubes are 25 mm thick for the bottom tube, and 18mm for the top tube..
  • This is about 50 % thicker than almost all other brands on the market, making this one of the sturdiest stands in the world..
  • Steel & Nylon Construction. Virtually Unbreakable (under normal use)..
  • Small Cable Guiding Clips for running cables along the stand. Black Color..
  • Adjustable Height Range: 43-70 inches. Boom: 30 inches. Leg Diameter: 0.75 inch..
  • Top Tube Diameter: 0.6 inches. Lower Tube Diameter: 0.6 inches. Boom tube size: 0.79 - 0.39 inch.
Check Stock

Rockville RVMIC4 Round-Base Microphone Stand With Quick Release Hand Clutch

  • Rockville RVMIC4 Professional Round-Base Microphone Stand With Quick Release Hand Clutch..
  • One-hand adjusting using the hand-clutch system (no need to turn knobs to adjust!)..
  • Adjustable Height Range: 43-69 inches. Aluminum leg joints..
  • This mic stand is the easiest and quickest to adjust on the market!.
  • The stand tubes are 25 mm thick for the bottom tube, and 18mm for the top tube..
  • This is about 50 % thicker than almost all other brands on the market making this one of the sturdiest stands in the world..
  • 100% steel construction and Aluminum joints! NO Plastic parts!.
  • Virtually Unbreakable (under normal use). Cable guiding clip on the stand for running cables..
  • Black Color. Top Tube Diameter: 0.75" inch. Lower Tube Diameter: 1" inches..
  • Round base with a diameter of 9.84" inches. This rock solid stand weighs in at 8.8 LBS!.
Check Stock

Clutch Brake Handle Levers for 22mm 7/8 inch Handlebar Fit for 110cc 125cc 140cc TTR SSR Xmotos Apollo 125 Pit Dirt Bike CRF50 CRF70 Motor Bike Motocross Parts by KAKO

  • This clutch brake lever with perch and throttle grips cable fits for 22mm 7/8 inch handlebar 110cc 125cc 140cc TTR125cc Rfz 125cc SSR 125 Xmotos....
  • The dirt bike clutch lever is made of the high class quality and very durable material, the folding brake clutch levers diameter: 7/8" or 22mm ..
  • The Throttle Grips Cable overall length 990mm/38.98inch, cable moving length:105mm/4.13inch. Fit For CRF KLX TTR 110 125 150 200 250 cc Dirt Pit Bike..
  • 125cc dirt bike clutch lever, rfz 125cc dirt bike clutch lever, ssr 125 clutch and brake lever, tao tao 125cc clutch lever, kawasaki dirt bike brake....
  • If you have any questions about the product, you can contact us and we will provide you with the best service and solution.
Check Stock

Rockville Pair RVES1 Adjustable Tripod DJ PA Speaker Stands +Carry Bag/Universal

  • Includes: (2) Tripod Speaker Stands. (1) Carry bag for the stands..
  • Pair Rockville RVES1 Adjustable Tripod DJ PA Speaker Stands With Carry Bag..
  • Adjustable Height. Steel Construction with Nylon Clutch and Base. Black Color..
  • Weight Capacity: 100 lbs. Adjustable Height Range: 71 inches..
  • Base spread: 0-32 inches. Tube Diameter: 1.38 inches. Leg Diameter: 1.38 inches..
Check Stock

Rockville PRO-D7 KIT 7 Mic Drum Kit w/Bass+Snare+Overhead Microphones+(4) Stands

  • Package Includes:. (1) Rockville PRO-D7 KIT 7 Mic Drum Kit w/Bass+Snare+Condenser Overhead Microphones. (2) Rockville RVMIC3 Tripod Microphone Stand With Quick Release Hand Clutch & Boom. (2) Rockville Kick Drum/Guitar Amp Mic Stand, Steel Round Base+Fixed Boom+Rubber Pad.
  • Features of PRO-D7: Bass Drum Microphone:. Steel grill. Aluminum body. Zinc alloy hardware. Fits any mic stands. Anti-wind filter inside the grill. Element: Dynamic. Polar Pattern: Cardioid. Frequency response is engineered to be perfect for kick drums. Studio quality performance make these perfect for recording or live shows. Sounds great even at high SPL levels. Rejection of unwanted noises. XLR Output. Integrated flexible mounting hardware..
  • Features of RVMIC3: Rockville RVMIC3 Professional Tripod Microphone Stand With Quick Release Hand Clutch and Boom. One-hand adjusting using the hand-clutch system (no need to turn knobs to adjust!). This mic stand is the easiest and quickest to adjust on the market!. Leg joint is made out of aluminum (almost all other brands use plastic). The stand tubes are 25 mm thick for the bottom tube, and 18mm for the top tube..
Check Stock

Lisle 14440 Water Pump Wrench

  • More extensive design: 32mm&36mm clutch fan removal tool kit, compatible with a wider range of models than similar products, compatible with most models of BMW, Ford and Mercedes-Benz. And its price is more affordable and better quality. This is a two-piece multifunctional tool that you will like..
  • Application: 32mm&36mm wrench tool is compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and newer models, compatible with Ford..
  • Brand new upgrade tool: 32mm & 36mm Fan Clutch Nut Wrench tool is more practical than similar tools on the market. It has passed rigorous engine tests and is fully fitted, which can save you a lot of money.
  • Quality: This 2-piece fan clutch wrench set is made of high-strength steel, with precise dimensions, and has undergone many actual vehicle tests. The rubber handle covered in the middle helps prevent hand fatigue during prolonged use..
  • Service: ZKTOOL has the most perfect warranty service. We provide all the necessary information for each product. If you have any questions, please contact us. We will wait 24 hours..
Check Stock

NexADD Fan Clutch Wrench Set 32mm & 36mm Water Pump Holder Tool Fit for BMW Ford GM Chevrolet,Fan Clutch Nut Wrench Set,Fan Clutch Removal Tool,Water Pump Pulley Holder,Clutch Fan Removal Tool Kit

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES ★- The NexADD 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans. The holder bar keeps the water pump pulley in place while loosening the radiator fan. It is a direct replacement and completely fit, wich could help you save much money..
  • FITS YOUR VEHICLE★-The NexADD Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to,the following applications: fan clutch wrench tool is kit compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and compatible with Ford.Also compatible with some Ford, GM, and Chevy models..
  • BUILT TO LAST★- The 15" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us..
  • EASY TO USE ★- Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clock....
Check Stock

Gator Frameworks ID Series Speaker Stand Set with Padded Nylon Carry Bag; Set of 2 Stands (GFW-ID-SPKRSET)

  • Includes: (2) Tripod Speaker Stands. (1) Carry bag for the stands..
  • Pair Rockville RVES1 Adjustable Tripod DJ PA Speaker Stands With Carry Bag..
  • Adjustable Height. Steel Construction with Nylon Clutch and Base. Black Color..
  • Weight Capacity: 100 lbs. Adjustable Height Range: 71 inches..
  • Base spread: 0-32 inches. Tube Diameter: 1.38 inches. Leg Diameter: 1.38 inches..
Check Stock

DRIFT MANIAC 8 Speed Freewheel 11-32T Epoch Ebike

  • 8 speed freewheel 11-34, 11-13-15-18-21-24-28-34 Teeth.Compatible with hub motor e-bike, mountain bike, cargo bike, city bike, commuting bike.Thread hub offset >=Freewheel stack height(38.5mm)+1.5mm.
  • Large 34 teeth sprocket, create bigger gear range. Make climbing even easier..
  • Ebike specific freewheel 8 speed,Made of high strength SPHC and durable chromoly steel. Nickel plated surface treatment..
  • Total height: 38.5mm+/-0.2mm, Weight:601g+/-1g,hot rolled steel cogs(sprockets) + 3 layer nickel plated, steel clutch mechanism..
  • Designed for E-bike, ratchet mechanism is high strength and durable.Speed range 309%. Fits standard motorized rear hub with threaded freewheel mount, compatible also with standard threaded bicycle freewheel hub..
Check Stock

700x38c Bike Inner Tube/32c/40c/43c/700 x 35c Bike Tube 2 Pack with a 2 Bike Tube Levers a 2.1 x1.4 Self-Adhesive Patch Premium Bike Tube 700 BMX Bikes Tube Schrader Valve.

  • Sized for 700 x 38c bike tube/32c/40c/43c/700x35 tube tires 33mm Schrader Valve : Choose The Right Size For Your Bike! Get the tube designed ideally for you! This tube is designed for 700 x 38c bike tube/35c/40c/32c bmx tires..
  • What's In The Box:Take your next race head on, with 2 Pack bicycle tube 700 x 38c/35c/40c/32c.This tube comes with a large size Self-Adhesive Patch and 2 nylon plastic bike tire levers..
  • Upgraded 2.1"x1.4" Self-Adhesive Patch and Kit:These premium tubes come with a 2.1"x1.4" large size self-Adhesive patch that enables you to repair your 700 x 38c bike inner tube/35c/40c/32c in a lot of circumstances..
  • Made with butyl rubber: Made with outstanding butyl rubber, 700x40c bike tube32c/35c/43c/38c for bicycle tire stay inflated for longer to combat flats that ruin race. Plus, they’re individually boxed, so they won’t get damaged before you even used them!.
  • Easy to install: use our free  included 2 tire lever allows you to easily remove the inner tube from the tire when changing the tube, simple and efficient. .
Check Stock

43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven

  • 43300 Pneumatic Fan Clutch Wrench includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually..
  • 43300 Pneumatic Fan Clutch Wrench Set ，Package included:1 * 43370 handle+1 *43380 32mm driving wrench+1 *43390 36mm driving wrench+1 *43440 40mm driving wrench+1 *43530 47mm driving wrench+1 *43430 7/8" driving wrench+1 *43410 1-7/8" driving wrench+1 *43420 2" driving wrench.
  • 43300 Pneumatic Fan Clutch Wrench Kit,43300 pneumatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • 43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,....
Check Stock

BETOOLL 32mm Fan Clutch Nut Wrench Water Pump Holder Removal Tool Kit Compatible with BMW E34 E39 E36 E46 E90

  • Only applicable to the following engine models in the BMW models described in the title: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32..
  • In order to disassemble the water pump on models with temperature-dependent viscosity-driven fans. Note: This 32mm fan clutch nut wrench is only compatible with BMW engines..
  • The fan clutch wrench removed the lock nut on the hot-tack fan..
  • The fan clutch bracket allows the technician to fix the water pump pulley in place while loosening the radiator fan..
Check Stock

OMT Fan Clutch Removal Tool Kit, 32mm and 36mm Fan Clutch Wrench Set Compatible with BMW Ford Mercedes-Benz More, 2pc Water Pump Holder Tool 15' Water Pump Pulley Holder for German Engine Maintenance

  • CUSTOM PURPOSE SET: This 2 piece fan clutch removal tool kit includes an extra-long 32mm & 36mm fan clutch wrench and a water pump holder tool to specifically reach and manipulate the fan clutch nuts and water pumps used in many German engines.
  • HIGHLY VERSATITLE: This fan clutch nut wrench set precisely fits a wide range of engines, including the M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B32 and more.
  • GALVANIZED CARBON STEEL: This fan clutch wrench set is made from heavy duty structural steel for reliable strength along the entire shaft.
  • each one is further galvanized to resist wear, tear, and corrosion under even punishing use.
  • EASE OF USE: The wrench and water pump pulley holder tool are specially lengthened to provide extra leverage with sure grip when working on fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly.
  • SERVICE & SUPPORT: OMT backs this water pump removal tool with a 1 year strong warranty and its usual friendly 24/7 customer service, ensuring that you'll enjoy easier checks, maintenance, and repair on your import cars for years to come.
Check Stock