Categories

Best Clutch Servo

Traxxas 36076-4 Stampede VXL 2WD Brushless Monster Truck Green

  • Extreme Brushless VXL power for 65+ mph speeds and advanced TSM stability management to harness the power without sacrificing fun.
  • Advanced TQi 2.4GHz transmitter and receiver with 36076-4 memory for fine tuning your speed machines.
  • Waterproof electronics, digital high-torque 2075 servo, precision steel turnbuckles with heavy-duty rod ends, and tough metric Hex hardware.
  • Tough Magnum 272 transmission with steel gears and Torque control slipper clutch.
Check Stock

Rostra 250-9636 Cruise Control Kit For Full Size Ford Transit

  • Same functionality as OEM systems featuring: Set, Accel, Coast, Resume, and Disengage.
  • Features safe, reliable performance that increases gas mileage and fuel economy while reducing vehicle wear.
  • Avoid unintentional speeding and driving....
  • Works with automatic transmission vehicles.
  • Works with manual transmission, clutch disengagement switch required if tach wire fails to disengage....
  • Will not work on drive-by-wire equipped vehicles.
  • vehicle must have an actual throttle cable.
  • Completely electronic servo requires no source of vacuum to operate.
Check Stock

Mophorn 110V 600W Sewing Machine Servo Motor Max Speed 4500RPM Energy Saving Mute Tie Bar Brushless Servo Motor for Industrial Sewing Machine

  • 600W Servomotor: The sewing machine motor is standardly designed with Power: 600W, Voltage: 110V, Frequency: 60Hz and Speed Control: 500-4500RPM. Braking power, responsive, high sensitivity, low noise drive, almost no vibration, energy saving and environmental protection..
  • Pure Copper Coils: Servo sewing machine motor features pure copper coils withstanding high temperature working condition. Long lasting and reliable..
  • Variable Speed Control: Unique tie bar design to make your work easy. Easy to adjust speed up to 4500RPM and motor direction with buttons. Easy to read LED display..
  • Sturdy Construction Design: High quality plastic and thick metal frame, smooth appearance. Strengthened motor base for increasing stability. Pulley, sprocket cover and mounting hardware included..
  • Effortless to Install: Smaller and more lightweight than a comparable clutch motor. Easy to install, the same as the general motor installation method, without any modification. Ideal for industrial sewing machine with clutch motor, including high head machine, zigzag seam, layering machine, etc..
Check Stock

Mophorn 110V 750W 1HP Sewing Machine Servo Motor Max Speed 3500RPM Energy Saving Mute Tie Bar Brushless Servo Motor for Industrial Sewing Machine

  • 750W Servomotor: The sewing machine motor is standardly designed with Power: 1hp 750W, Voltage: 110V, Frequency: 60Hz and Speed Control: 500-3500RPM. Braking power, responsive, high sensitivity, low noise drive, almost no vibration, energy saving and environmental protection..
  • Pure Copper Coils: Servo sewing machine motor features pure copper coils withstanding high temperature working condition. Long lasting and reliable..
  • Variable Speed Control: Unique tie bar design to make your work easy. Easy to adjust speed up to 3500RPM and motor direction with buttons. Easy to read LED display..
  • Sturdy Construction Design: High quality plastic and thick metal frame, smooth appearance. Strengthened motor base for increasing stability. Pulley, sprocket cover and mounting hardware included..
  • Effortless to Install: Smaller and more lightweight than a comparable clutch motor. Easy to install, the same as the general motor installation method, without any modification. Ideal for industrial sewing machine with clutch motor, including high head machine, zigzag seam, layering machine, etc..
Check Stock

Traxxas 59076-3-RED Slayer Pro 4×4 Red TRX 3.3 Engine w/EZ-Start 2 Speed Transm

  • ...arting Polished Resonator dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
  • Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
  • Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body Dimensions: Length: 21.5″ (546mm) Width: 9.4″ (238mm) Behind Front Wheels Narrowest Point 11.4 (290mm) at Rear Wheels Widest Point, Heigh.
  • Part number(s) included (in factory packaging): 59076-3.
Check Stock

Traxxas 59076-3-BLUE Slayer Pro 4×4 Blue TRX 3.3 Engine w/EZ-Start 2 Speed Tran

  • ...arting Polished Resonator dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
  • Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
  • Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body Dimensions: Length: 21.5″ (546mm) Width: 9.4″ (238mm) Behind Front Wheels Narrowest Point 11.4 (290mm) at Rear Wheels Widest Point, Heigh.
  • Part number(s) included (in factory packaging): 59076-3.
Check Stock

Barnabas Robotics Servo Motor Tester Kit | 180 Degree 9g Servo Motor + RC Servo Tester Controller + 6V Battery Holder

  • [CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price!.
  • [9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns..
  • [4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors..
  • [SERVO TESTER] Includes 3 modes to test servo motors or ESC.
  • [GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects.
Check Stock

WEISHUJI 25T Servo Horn Steering Arm, Servo Horn 25T Steering Arm, Aluminum 25T Servo Horn Steering Arm for Traxxas TRX4 Axial SCX10 Tamiya 1/10 RC Crawler Truck (Red-Black)

  • 25T Servo Horn Steering Arm fits for Traxxas TRX4 Axial SCX10, SCX10 ii 90046 1:10 scale rc crawler, and Servo Horn 25T Steering Arm is CNC machined..
  • 25T Servo Horn Steering Arm has 18mm and 22mm threaded mounting holes for adjustability, and Servo Horn 25T Steering Arm is of high quality..
  • 25T Servo Horn Steering Arm is Red-Black, and Aluminum 25T Servo Horn Steering Arm is of small size and lightweight..
  • 25T Servo Horn Steering Arm works on Futaba, Savox, Emax, HSP, Power HD, Xcore, Aluminum 25T Servo Horn Steering Arm works on other popular prand servos motor (Except Hitec and JR Servos)..
  • Package of 25T Servo Horn Steering Arm includes: 1 x 25T Servo Arm (Red-Black), Servo Horn 25T Steering Arm, Aluminum 25T Servo Horn Steering Arm.
Check Stock

WEISHUJI 10PCS 25T Aluminum Servo Horns Arms, M3 Threads Metal Steering Arm for Towerpro, HSP, HD power, Futaba, Axial, Savox, Xcore, Standard Servos Motors, MG995 MG996R MG946R, S3003 etc servo (Red)

  • 25T Aluminum Servo Horns Arms are suitable for mostly 25T Standard Servo Motor, and M3 Threads Metal Steering Arm is compatible with Towerpro HSP HD power Futaba Axial Savox Xcore Standard Servos Motors MG995 MG996R MG946R S3003 etc servo..
  • 25T Aluminum Servo Horns Arms are made of strong aluminum, 25T Aluminum Servo Horns M3 Threads are hard to break..
  • 25T Aluminum Servo Horns Arms are of dimension 35x15x6mm, and Metal Steering Arm behaves very well on your RC models..
  • 25T Aluminum Servo Horns Arms are djustable type servo arm, and M3 Threads Metal Steering Arm have two steel bolts to secure the split-clamp onto the servo output..
  • Package of 25T Aluminum Servo Horns Arms include: 10 x 25T Aluminum Servo Horn-Red, M3 Threads Metal Steering Arm, 25T Aluminum Servo Horns M3 Threads some hardware.
Check Stock

WEISHUJI Aluminum Servo Horns,25T Aluminum Servo Horns,Aluminum servo Horn 25T Servo Horn Extension Steering Arm Server Rocker for RC Car Truck Buggy 5Pcs

  • Aluminum Servo Horns are made of High Quality CNC Machined Aluminum, sturdy and durable..
  • 25T Aluminum Servo Horns are compatible with Futaba, Savox, Orion, & Other Popular Servos (25T Aluminum Servo Horns Will Not Work On Hitec Or JR Servos)..
  • Aluminum servo horn 25t Dimension:aluminum servo horn 25t Length: 37mm/1.462 inches..
  • Distance from Servo Horn Extension Steering Arm Server Rocker hole center to Servo Horn Extension Steering Arm Server Rocker hole center：8mm, 11mm, 14mm, 17mm..
  • Package List of Aluminum servo horn 25t includes: 5 * Aluminum servo horn 25t.
Check Stock

Micro Machines Playtronic MAX

  • Metal gear servo 9g is equivalent to the metal tooth plate of SG90. The installation size is slightly different from that of SG90. The servo system is more comfortable than cheap plastic gears..
  • Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller..
  • This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware..
  • The servo motors weight is 13.6g, suitable for 450 electric straight, swash plate steering gear, fixed-wing RC airplane..
  • The package included 6pcs MG90S Micro Servo, each MG90S come with one motor and three servo arms and three screws..
Check Stock

ZHIPAIJI for FLYWING FW200 rc Helicopter Spare Part Servo Arm FW200 Parts FW219

  • Metal 25T Servo Arm Round Type is suitable for Hitec, Parallax, Futaba and other brands (40x20x36mm) standard servos..
  • Metal 25T Servo Arm Round Type Material is CNC Aluminium..
  • Metal 25T Servo Arm Round Type Mounting Hole Spacing is 14mm..
  • Metal 25T Servo Arm Round Type Servo disc diameter is approx 20mm..
  • Package of Metal 25T Servo Arm Round Type Includes: 5 x Servo Accessories Disc 20 x Screws.
Check Stock

Que-T Brass Steering Servo Horn Arms 3.1/4.1/5.1mm for RC Car Boat Rudder Parts (Brass, 4.1mm)

  • Suitable--The servo arm is suitable for EMAX ES08MA II/ES08MD II Servo (For Axial SCX24 Crawler)..
  • High Quality--Our rc servo arm is made of aluminum alloy material, not easy to corrode, construct for precision and durability..
  • High Precision--CNC machining makes it precise in size and stable in performance..
  • RC Servo Bracket--This servo arm comes with a servo bracket, which is made of high quality aluminum, anodized and durable..
  • What You can Get--A rc servo arm with some screws, easy to install, and a rc servo bracket..
Check Stock