Categories

Best Clutch Servo System

FEETECH 35KG Servo Motor 360 Degree High Torque Digital Servo High Voltage Waterproof Metal Gear Aluminium Case for RC Helicopter Airplane Car Boat Robot Controls - FT6335M

  • HIGH QUALITY SERVO: FT6335M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 360 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock

FEETECH 35KG Servo Motor 7.4V High Voltage Waterproof High Torque RC Servo Full Metal Gear Digital Servo, Aluminium Case, Control Angle 180° for 1/8 1/10 RC Cars, TRAXXS x4, Baja, RC4WD, GTR and More

  • HIGH QUALITY SERVO: FT5330M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 180 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock

Redcat Racing Gen8 V2 International Scout II 1/10 Scale Rock Crawler Scale Truck, Green, GEN8-V2-GREEN

  • Portal axles, Divorced transfer case, High strength 1.5mm C-Channel chassis rails, 4-Link suspension, Aluminum threaded shocks, Functional 1.9 beadlock wheels, CNC machined spools, Metal wheel hexes, Rubber sealed ball bearings throughout, 47º precision steering, Panhard bar, Front mounted motor..
  • Licensed International Harvester Scout II body, Hard plastic grill, LED ready body and bumpers, Plastic folding mirrors, Molded inner and outer fenders, Licensed Interco Super Swamper tires, Shackle mount bumpers (LED ready), Plastic rock sliders.
  • Adjustable wheel base, Adjustable ride height, Adjustable toe angle, Multiple shock positions, Adjustable approach and departure angle, Tunable suspension, Lockable adjustable slipper clutch, Many upgraded parts available, Many 3D printable parts available..
  • 17T 550 brushed motor, Waterproof crawler ESC, Hexfly waterproof steering servo, 2.4GHz radio system..
Check Stock

CenryKay MG90S Servo, Helicopter QC Module 9G Servo Motor Metal Gear Micro Servo Motor Smart Robot Helicopter Plane Boat for Arduino Raspberry Pi Project(6PCS)

  • Metal gear servo 9g is equivalent to the metal tooth plate of SG90. The installation size is slightly different from that of SG90. The servo system is more comfortable than cheap plastic gears..
  • Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller..
  • This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware..
  • The servo motors weight is 13.6g, suitable for 450 electric straight, swash plate steering gear, fixed-wing RC airplane..
  • The package included 6pcs MG90S Micro Servo, each MG90S come with one motor and three servo arms and three screws..
Check Stock

Traxxas 1/10 Slash, 2WD, RTR (Includes Battery & Charger): PinkX

  • Traxxas 58034-1 - Slash XL-5 Brushed 1/10 2WD SCT RTR, w/ iD Battery, Pink.
  • Features: Titan 12-Turn 550 modified motor XL-5 waterproof electronic speed control Water-sealed receiver box and steering servo Metal gear Magnum 272 transmission Torque-Control slipper clutch 30+mph top speed Adjustable steel turnbuckles with captured rod ends The tires are mounted on satin-finish 2.2" Slash wheels Included optional 23-tooth pinion gear Traxxas 4-amp DC Peak Detecting Fast Charger Traxxas Power Cell NiMH Battery with iDTM Avai.
  • Includes: (1) Slash Short Course Race Truck (1) TQ 2.4GHz Radio System (1) ESC,(1) Body (1) Motor (1) 7-Cell 3000mAh NiMH Battery (1) 4-Amp DC iD Car Charger Illustrated Instruction Manual Decals.
  • Specs: Vehicle Dimensions: Length: 22.36" (568mm) Width: 11.65" (296mm) Height: 8.42" (214mm) Front and Rear Track: 11.65" (296mm) Distance Between Outer Edges of Wheels Wheelbase: 13.2" (335mm) Ground Clearance: 3.5" (89mm) Weight: 76.2oz (2.16kg) Body Dimensions: Length: 21.3" (542mm) Width: 11.4" (289mm) Height: 5.3" (135mm) Height: 5.3" (135mm).
  • Part number(s) included (in factory packaging): 58034-1.
Check Stock

SunFounder Raspberry Pi Car DIY Robot Kit for Adults Picar-s,Visual Programming with Ultrasonic Sensor Light Following Module Line Following Module

  • STEM ROBOTICS KIT - A complete rpi robot kit based on Raspberry Pi. It’s funny to assemble it.( (Compatible with RPi 4B/3B/3B+/2B/2B+, Raspberry Pi....
  • EASILY CODING - Python code: Great for web development.
  • Dragit: base on Snap!, fun and simple GUI programming..
  • VARIOUS SENSORS - The raspberry pi car comes with three sensor modules including ultrasonic obstacle avoidance, light follower, and line follower..
  • SOLID PLATES - Upgrade durable and shatterproof plate. And new style Servo,the MAX torque of the clutch gear digital servo is up to 1.6KG. It rotates....
  • EASY OPERATION - Elaborately-written user manual and published video for you to easy build your own sensor car robot..
Check Stock

Globact RC Digital Servo Tester/ESC Consistency Tester for RC Helicopter Airplane Car(Servo Tester,ESC Consistency Tester,RC Helicopter Tester Tool)

  • 【High Srecision】The RC ESC tester used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds).
  • 【Button The Select】 (Note: the key switch function, circulation patterns) 1. S-1 manual mode (Manual) 2.S-2-bit mode (Neutral) 3.S-3 automatic mode (Automatic).
  • 【Keys Pulse Width】1. 50H analog servo signal cycle 20us frequency 50Hz, 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz,3. 250H Digital Servo signal cycle 4us frequency 250Hz.
  • 【Powerful Testing Function】RC plane servo tester can test the steering gear is able to respond to subtle changes With PPM signal test function in the display.
  • 【How To Use】Digital or analog signal button selects the corresponding servo system and then plugs into the steering servo to avoid damage to the steering servo.
Check Stock

FEETECH 35KG Servo Motors FT5330M High Torque RC Servo Full Metal Gear Digital Servo,Aluminium Case, Control Angle 180° for Scx24,1/8 1/10 RC Cars,TRAXXS x4, Baja, RC4WD, GTR and More

  • BRAND SERVO-FEETECH 35KG digital rc servo, high sensitivity, stable and low-noise. High quality PA aluminum case, more sturdy. Hard iron shaft, provide higher stability..
  • EXCELLENT SERVO PERFORMANCE-High precise upgrade metal gear, with better accuracy and longer service life.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • UPGRAD SERVO-Upgraded high torque rc servo, high rotation – well-controlled 180° (at 500→2500μsec) large steering angle, when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable. React quickly and accurately. No stuck problem..
  • MATCHING SERVO ACCESSORIES-This mini micro servo is equipped with metal mount and servo horn, replaces the original plastic accessories. No need to order accessories with more trouble..
  • WIDE-APPLICATION-Perfect for Axial scx24, 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system. The servo size is 55X20x43mm..
Check Stock

10 pcs 50cm 3-Pin Servo Extension Cords Cable Lead Male to Female Plug with 19.7inch Wire for RC Futaba JR Servo Connection Parts

  • 3-Pin Servo extension cords cable lead male to female plug..
  • Line length: About 50cm / 19.7inch；Packing quantity:10pcs..
  • This comes in very handy when your servo is further away from the controller than the wire on the servo allows..
  • Male connector on one end goes to controller, female connector mates with servo, allowing it to work in either system or as an adapter between systems..
  • Practical Range: Airplane, Helicopter, Quad Copter / Multi-Copter RC Cars, For Servo Connection or Receiver Connection..
Check Stock

Metal Servo Stand Mount, RCPLAGA RC Servo Stand Mount Part for 1/10 RC Crawler Car AXial SCX10 II 90046 90047 Axle Upgrade Parts (Black)

  • 【FIT FOR】: RC Servo Stand Mount Part are suitable for 1/10 SCX10 II 90046 90047 RC crawler car. It is a good choice to upgrade your RC car..
  • 【PREMIUM MATERIAL】: The Metal Servo Stand Mount Part is made of high-quality metal, which has strong wear resistance, corrosion resistance, no rust, and durability..
  • 【EASY TO USE】:The 1/10 Metal Servo Stand Mount is attached with screws, which is easy to install and helps to install the steering gear on the front axle..
  • 【Exquisite ACCESSORIES】: Exquisite craftsmanship and excellent quality, increase rigidity, prevent deformation, and help extend the service life of the servo system..
  • 【PACKAGE LIST】 :1 x upgrade metal servo stand mount,1 x Bag of Screw.
Check Stock

Dorhea 5 Pcs SG90 Micro Servo Motor Mini Servo SG90 9g Servo Kit Compatible with RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control

  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • Mini servo SG90 is tiny and lightweight with high output power..
  • SG90 servo motor compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • SG90 9g servo support Arduino,Futaba, JR, Sanwa and Hitec remote system..
Check Stock

Traxxas 36076-4 Stampede VXL 2WD Brushless Monster Truck Green

  • Extreme Brushless VXL power for 65+ mph speeds and advanced TSM stability management to harness the power without sacrificing fun.
  • Advanced TQi 2.4GHz transmitter and receiver with 36076-4 memory for fine tuning your speed machines.
  • Waterproof electronics, digital high-torque 2075 servo, precision steel turnbuckles with heavy-duty rod ends, and tough metric Hex hardware.
  • Tough Magnum 272 transmission with steel gears and Torque control slipper clutch.
Check Stock

Liyeehao 1/10 Servo Stand Mount, RC Servo Stand Mount, Assemble Wear Resistance RC Accessory for RC Car Easy to Install Replacement

  • The servo stand mount can be firmly assembled together without any other attachment, very easy to install and does not take much time..
  • Superb craftsmanship and superior quality enable to increase rigidity and prevent distortion, help extend the service time of servo system..
  • Servo stand mount with steering link rod, fit for AXIAL SCX10 II 90046 1/10 RC car..
  • Servo stand mount is made of high quality aluminum alloy material, steering link rod is mainly made of high quality metal, strong wear resistance, corrosion resistance, no rust and durability..
  • Wonderful replacement for the old or broken one, directly fitment..
Check Stock