Arduino Uno Nano 4 Axis Stepper Control CNC Mill G-Code Translator A4988 Compatible Easy to Use and Friendly Software

  • Runs on almost any PC which has : WIN 10, 8, 7, XP, Millenium, NT 2K, 98. Low PC CPU loading, that do not hang or overload your PC, so you can use....
  • Load your g-code and start machining. Easy straight forward operation. Quick configuration for many cnc type. Simple configuration for custom cnc..
  • When powering down record position of cnc x,y,z,w.
  • so it does not loose cnc machine position at start up. Integrated firmware to easily program....
  • Hints to help and guide during operation plus tutorial videos all embedded in the software. Up to 16 khz operation for precise stepper motor motion..
  • Jogging on all 4 axis x, y, z, w. 4th axis (w) can be geared to x or y (via g-code) to create surface of revolution. Emergency shutdown for safe....
Check Stock

Genmitsu CNC Machine 4040-PRO for Wood Acrylic MDF Nylon Carving Cutting, GRBL Control, 3 Axis CNC Router Machine, Working Area 400 x 400 x 78mm (15.7” x 15.7” x 3.1”)

  • An effective working area of 15.7” x 15.7” x 3.1” is large enough for most daily CNC projects. The redesigned Z-axis carriage makes swapping a spindle easier. Adding more screw holes on the non-all-in-one Z-axis carriage allows you to install the larger spindle higher for extra overfeed height..
  • New Steel HSS Frame - all new redesigned frame structure, each axis is composed of two 16mm Steel HSS linear tubes and a lead screw motion drive, dual Y axis rails, and all metal frame. This new high-rigidity structure ensures the stability and accuracy of the CNC machine..
  • Still based on open-source Grbl v1.1, the 4040-PRO CNC router has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. Upgrades include extended function ports like a dedicated 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port..
  • All main parts are pre-assembled and it just takes about 15 minutes to finish the whole machine assembly. The spoilboard is combined by two pieces of MDF boards. Each MDF board could be replaced individually. You don’t need to replace the whole spoilboard when a panel gets damaged..
Check Stock

Aluminum Suspension Links Set for AXIAL SCX24 AXI90081 AXI00004 1/24 RC Crawler Car Metal Link Rod Tie Rod Suspension Set AX31613 Accessories Aluminum Linkage Suspension Links Set

  • Compatibility: this aluminum suspension links set is a replacement of Axial stock part AXI31613 suspension links, compatible with 5.25 inch/ 133.5 mm wheelbase Axial SCX24 vehicles.
  • Please confirm whether the product size is what you need according to the picture.
  • There may be errors in the size, please place an order carefully.
  • Function: this aluminum suspension link is compatible with Axial SCX24 Deadbolt AXI90081, B-17 Betty AXI00004, intended to replace stock plastic links, equivalent to parts of AX31613.
  • Nice performance: made of quality aluminum, the suspension rod is machined by precision CNC for light weight and durability, making your RC crawler car more rugged with this aluminum link kit.
  • Package includes: you will get 6 pieces of aluminum suspension links, including short, medium, and long ones, 1 piece of Y-Links, 13 pieces of screws, together with a hex wrench.
  • CNC machined for precision, helps improve the performance in place of the original part.
  • Note: this set of suspension Links does not fit AXI00001 C10, AXI00002 JEEP.
  • Only the suspension links, screws and hex wrench are included, other products are not included.
  • Please don't put the front and back wrong.
Check Stock

CODA RACING Aluminum Front&Rear Bridge Diff Housing Cover Steering Knuckle Rod Tie Links Servo Mount for AXIAL SCX24 AXI00001 AXI00002 AXI00005 AXI00006 RC Crawler Car

  • Fits: Axial SCX24 Deadbolt AXI90081.C10 AXI00001.Jeep Wrangler AXI00002.B-17 Betty AXI00004.Jeep Gladiator AXI00005.Ford Bronco AXI00006.
  • Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance..
  • Includes Front&Rear Bridge(2).Steering Knuckle(2).Rod Tie Links(1).Servo Mount(1).Rear Links Mount(1).Screws.
  • Note: This kit does not include gears, bearings and drive shafts.
Check Stock

2 Pieces CNC Router Z-Axis Tool Setting Touch Plate CNC Touch Plate Probe Block Router Probe Milling Tool for Milling DIY Engraving Machine Probe

  • Package includes: you will receive 2 pieces of CNC router Z-Axis tool touch probes, which are equipped with high precision, smooths surface, and....
  • Size parameters: the size of this setting touch plate probe measures approx. 40 x 10 mm, and the length of cable measures approx. 1.2 cm, which can....
  • Reliable material: this CNC router Z-Axis tool is made of quality alloy material, strong and durable, and the bottom is insulated, waterproof and....
  • Easy to use: this Z-Axis router tool setting touch probe has the characteristics of high accuracy, smooth surface and exquisite design, and it is easy....
  • Wide range of application: this setting touch plate probe is suitable for processing most materials, such as woodworking, aluminum, acrylic, plastic,....
Check Stock

Genmitsu 3 Axis GRBL 1.1h 32-Bit CNC Controller Board for CNC Router Machine 3018-PROVer V2

  • This controller board is compatible with Genmitsu CNC 3018-PROVer V2 CNC Machine..
  • Applicable Software: Grblcontrol (Candle), LaserGRBL, and other software that supports GRBL firmware, GRBL firmware version V1.1h..
  • USB interface communication, support 3-axis engraving, and laser module..
  • Functional Input Interface: Includes X, Y, Z limit switches, Z-Axis tool setting touch probe, emergency stop switch, GRBL offline controller, MPG, 3 pin laser and air assistance pump..
  • All control signals are isolated by optocoupler and have strong Anti-interference ability. The outer ABS case could protect the control board well..
Check Stock

RZXYLRC Aluminum Alloy Steering Servo Mount Bracket for 1/24 Axial SCX24 AXI90081 AXI00002 RC Crawler Upgrades (Red)

  • Fits: Axial SCX24 Deadbolt AXI90081.Jeep AXI00001.C10 AXI00002.B-17 Betty AXI00004.
  • Made of quality aluminum, making your RC crawler car more rugged..
  • The RC servo mounting frame is small in size and light in weight, which will not add extra burden to your remote control car..
  • Easy install & CNC Precision Manufacturing. Which makes it have perfect size and stable performance, which is very suitable for the original model..
Check Stock

Stay Home [Explicit]

  • THE WORLD’S FIRST WALL MOUNTED CNC MACHINE KIT: its upright design provides a huge cutting space - up to 32sq ft - on a tiny footprint. By eliminating the heavy and expensive components of traditional CNC milling machines, the M2 becomes a purpose-built, making machine without all the added fuss. It cuts sheets of nearly any material such as wood, metals, plastic and foam, so that you can craft anything you like. Projects made with our M2 include benches, signs, lamps, tables, and even a guitar!.
  • FULL KIT: M2 is a 3-Axis wall-mounted CNC cutting machine and comes with laser-cut, steel and powder coated mounting brackets, lead screw z-axis, built-in dust collection port, three ⅛‘’ router bits that offer extremely precise cuts. The router is not included. Compatible routers include: DeWalt611, Bosch Colt, Makita RT0700CX and EU equivalents to each of the above..
  • OPEN-SOURCE SOFTWARE: The M2 is designed to be used with Makerverse open-source software which is included with your purchase. Makerverse is a GRBL CNC control application that has custom controls made specifically for all Maker Made products: the Maslow, M2 and 300x. The application is derived from the open source CNCjs project and will continue to receive new features and updates f....
Check Stock

SainSmart Genmtisu GRBL Controller Board for CNC Router Machine 3018-PROVer/ 3018-PROVer Mach3/ 3018-MX3

  • This controller board is compatible with Genmitsu CNC 3018-PROVer. If you have already had the Genmitsu CNC Router 3018-MX3/ 3018-PROVer Mach3, this controller board can help you turn Mach3 control to GRBL control..
  • Applicable Software: Grblcontrol (Candle), LaserGRBL, and other software that supports GRBL firmware, GRBL firmware version V1.1f..
  • USB interface communication, support 3-axis engraving, and laser module..
  • Input interface: X Y Z limit (HOME) interface, Z-axis tool return to zero, emergency stop switch interface, GRBL offline controller interface..
  • All control signals are isolated by optocoupler and have strong Anti-interference ability.
Check Stock

Genmitsu 3020-PRO MAX CNC Router Machine for Metal Carving and more, GRBL Offline Controller, with Limit Switches & Emergency-Stop, XYZ Effective Working Area 300 x 200 x 72mm (11.8 x 7.9 x 2.8inch)

  • ... drilling, and carving operations on various metals, like brass, copper and 6061 aluminum, etc..
  • Upgraded linear guide structure and 4040 Y axis profiles highly improve the engraving accuracy and processing strength, eliminating Z axis wobble issues that most other desktop CNC machines have..
  • One-piece machined and molded aluminum design ensures flatness and strength of the work platform. Integrated measurement scale is convenient for material positioning. The platform is compatible with most of the CNC clamps on the market..
  • Everything you need out of the box. The Genmitsu 3020-PRO MAX router already includes all of the accessories and components you need at an affordable price, including offline controller, XYZ axis limit switches, emergency stop switches, Z-probe and more..
  • The pre-assembled module of XZ Axis Gantry and Base Assembly reduces the effort of assembly. You just need 3 main installation steps and wiring to start carving your projects. All stepper motors are equipped with manual jog wheels making it easy to adjust and position your spindle or stock material..
Check Stock

MYSWEETY 2 in 1 7000mW CNC 3018 Pro Engraver Machine, GRBL Control 3 Axis DIY CNC Router Kit with 7W Module Kit, Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine with Offline Controller

  • ️【2-IN-1 CNC 3018 Pro】- New Version: CNC 3018-PRO is an upgraded version of 3018. Control software: GRBL.
  • Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10. Plastic body with a profile, small size, light weight, USB interface, GRBL control systems, learn to use the preferred entry..
  • ️【Come with 7W 7000mW module】- can be carved wood, bamboo, paper, ivory, leather, flammable plastic, PCB, ceramic/stone, metal surface paint, metal surface plating etc. Can not work on metal, iron, glass, 201/304 stainless steel, jewelry or silver..
  • ️【The main two advantages of offline controller 】- 1,do not need to connect the computer.
  • 2,do not need to download files. Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle, manully open or close cooling fan..
  • ️【Versatile】- Capable of cutting all types of plastics, woods, acrylics(Only suitable for spindle milling cutter engraving), PVCs, and PCBs, the MYSWEETY can be used on a wide range of projects and materials..
Check Stock

Genmitsu 24” x 24” 600 x 600mm XY-Axis Extension Upgraded Accessories Kit for CNC Router Machine PROVerXL 4030

  • Level up your CNC: This kit will extend all of your XY-Axis, easily convert your PROVerXL 4030 to a 6060 (24”x 24”) with pre-installed axis....
  • Compatibility: Drop-in replacement for use with a Genmitsu PROVerXL 4030. The 6060 Aluminum Board & MDF Board will also be available soon..
  • Flexible Extension: You could extend to 6060, 6040, or 6030 with this kit, just built to suit your needs..
  • Simple Assembly: We will take you through the assembly process every step of the way. You could find the Installation Guide located in our at the....
  • Cost-Effective: Save money by putting your current CNC to better use. You don’t need to spend more on complicated assembly..
Check Stock

Genmitsu 3018-PROVer V2 Upgraded Desktop CNC Router Machine with GRBL Offline Control, Limit Switches & Emergency-Stop, XYZ Effective Working Area 284 x 180 x 40mm (11.2 x 7.1 x 1.6 inches)

  • The V2 is an upgraded version of one of our best selling Desktop CNC Machines, the 3018-PROVer. Class leading value has gotten even better and is easier than ever before to setup. With more pre-assembled accessories, it takes less than 20 minutes to assemble this 3018-PROVer V2 CNC machine. A real entry-level CNC for anyone who wants to learn a new skill, work on an artwork project, design a DIY gift, or start a small business..
  • Still based on open-source Grbl v1.1, the 3018-PROVer V2 CNC has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. More extended function ports were added, such as the 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port. It also supports updating the firmware through an SD card..
  • The redesigned Z Axis Carriage has fixed excess movement which came from the old design anti-backlash spring. Not only did this improve the engraving accuracy, but also increased the effective range of the Z Axis from 35mm to 40mm. All stepper motors are equipped with manual jog wheels making it easy to adjust and position your spindle or stock material..
Check Stock