Categories

Best Cnc Drill Center

Kingson Self Centering Dowel Jig, Wood Doweling Hole Drill Guide Tool with Step Drill Guide Bushings Set, Woodworking Joints Tools for DIY Project

  • 【High Precision】Self-centering pin fixtures are machined by precision CNC machine tools. When the middle bolt is turned, the aluminum clamps on both sides are tightened at the same time, and the board is clamped evenly so that the perforation position is in the exact center. Front-view drill aid marking lines for direct center alignment, making it easier to use..
  • 【Self-centering】Self-centering woodworking dowel jig, more suitable for making different wood dowel joints, realizing simple and convenient precision drilling, more accurate positioning, leaving no offset or gap..
  • 【Excellent Quality】The surface of the aluminum fixture is anodized, with bright colors, scratch resistance, acid and alkali resistance, and will not fade after long-term use. The central iron piece is treated with alkaline oxidation, and the screw rod is chrome-plated to prevent rusting and is stable and durable..
  • 【Professional Product】Pilot hole sizes are 1/4", 5/16", 3/8", 7/16" and 1/2". Three different drill sizes are included, 1/4", 5/16" and 3/8", for more specialized requirements with minimal manipulation..
  • 【Application and Use】It is very suitable for some woodworking DIY projects to do the splicing work of wooden boards. Make closet shelves that require flat....
Check Stock

22PCS Self Centering Drill Bit Set, Door Window Cabinet Hinge Hardware Drill Bits, 10 Tapper Core Hole Puncher with 10 Replacement Drill Bits & Hex Key & Center Punch

  • 22PCS CENTER DRILL BIT SET: You will get 10 x center drill bits, 10 x replacement drill bit, 1 x hex key, 1 x center punch, perfect match to meet any of your work needs.
  • SIZE OF BITS: Hinge drills come in 8 different sizes: 2 x 5/64', 2 x 7/64'', 2 x 9/64'', 11/64'', 13/64'', 5mm and 1/4", each drill bit corresponds to a shell, and the size is marked on the shell, which is easy to distinguish and convenient to use.
  • MATERAIL: Center drill is made of high speed steel drill bit & quenching treatment shell designed, wear-resistant and durable, anti-rust and anti-corrosion, long service life.
  • MULTIFUCTION: Center Drill bit perfect for hinges, handles, drawer slides, woodworking . Suitable for professionals and woodworking enthusiasts.Center punch for precise positioning in a variety of materials, which can be used as an awl for belts or glass window breaker for car safety.
  • EASILY REMOVE CHIPS: Sawdust will be automatically discharged from the top of the holes on both sides, the drill will not be blocked, and can be used with confidence, eliminating the time for manual chip removal and speeding up the work progress.
Check Stock

Hss Center Drill, High Hardness Angle 60 ° Center Drill, for Industry Drill

  • Each center drill has a double end and with standard milling Angle 60 °.
  • Used for parts that need to be machined between production centers or work piece center holding.
  • Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts.
  • The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating.
  • These center drill set are made of high speed steel, high hardness and durable in use.
Check Stock

22PCS Self Centering Drill Bit Set, Door Window Cabinet Hinge Hardware Drill Bits, 10 Tapper Core Hole Puncher with 10 Replacement Drill Bits & Hex Key & Center Punch

  • 22PCS CENTER DRILL BIT SET: 10 x Center Drill Bits: 5/64'*2, 7/64''*2, 9/64''*2, 11/64'', 13/64'', 5mm and 1/4". With 1 Hex key, 10 replacement drill bits, and 1 Center Hole Punch. They all are made of HSS. High hardness, durable and superior drilling performance..
  • High Quality: High speed steel self centering drill bits with high hardness, which is rustproof, solid, durable and superior drilling performance which is guide for centering the pilot holes needed for the hinges..
  • Precise Positioning: No displacement, sawdust will be automatically discharged from top of hole on both sides, drill bit will not be blocked..
  • Excellent Design: Automatic positioning center enhance accuracy and efficiency. Double-sided hole design fast and automatic discharge sawdust from the hole on both sides, without drill blocked, which helps you save time in removing sawdust..
  • Multipurpose: Center Drill bit perfect for hinges, handles, drawer slides, woodworking . Suitable for professionals and woodworking enthusiasts.Center Punch for precise positioning in a variety of materials, which can be u....
Check Stock

5pcs High Speed Steel Center Drill Set, Center Drill Bits, Combined Drill, Countersink Lathe Mill Tool Set, HSS 60 Dgree 1.5/2/2.5/3/4mm for Lathe Machines & Remove Chips

  • ★【For Metalworking】These center drill bits are used in metalworking to provide a starting hole for a larger-sized drill bit..
  • ★【For Conical Indentation】They can also be used to make a conical indentation in the end of a workpiece in which to mount a lathe center..
  • ★【Material】Made from high speed steel, these center drill bits are of high hardness and good wear resistance.Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes..
  • ★【5 Sizes】There are total 5 pieces center bits in this set that can be used to drill holes in different sizes..
  • ★【Applications】Widely used on lathe machines, these center drill bits can cut easily and remove chips smoothly.Available for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum, and so on..
Check Stock

10Pcs Center Drill Bit Set High Speed Steel 4341 Straight Shank Center Drill Bit Combo Drilling Tools 2.5mm for Hole Processing

  • ★High Precise Positioning: This high speed steel center drill bits is mainly used for the prefabricated precise positioning of hole machining, guiding twist drills for hole machining, thereby effectively reducing errors.
  • ★Used for: Use a center drill to make a conical hole for the center of the lathe as a starting point for a standard twist drill. Can be used as a starting hole to prevent the drill bit from deviating from the original route. Used for center cages that need to be processed between parts or workpieces.
  • ★High Performance: This center drill bit is made of high‑quality high-speed steel material, with high hardness and good wear resistance, strong and durable, has a long service life. With good applicability, stability, high processing efficiency, long life expectancy, etc..
  • ★Widely Used: This center countersink drill bit are good for most general purpose applications, which can not only be used on a lathe, but also can be installed at the end of the workpiece in the center of the lathe.
  • ★Note: Please allow slight error due to manual measurement. Thanks for your understanding.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Check Stock

ATOPLEE 1pc Metric HSS 6542 Left Hand Thread Tap (M16x2.0)

  • {High Quality Material} The tap is made of HSS6542 material, which is stronger and more durable than ordinary taps..
  • {Size}Total Length:101mm,Shank Diameter:12mm,Pitch:2mm..
  • {Note}This is a small straight groove tap, which can be used for tapping of round through holes or shallow blind holes. Pay special attention to not being used for blind hole tapping..
  • {Widely Usage}Tapping can be done on stainless steel, iron, aluminum, copper, general steel and other materials. It can be used with manual equipment or special processing consoles, such as tapping machine, driller's integrated bench drill, CNC numerical control lathe, machining center, etc..
  • {Package Included} 1x Left hand Thread Tap.
Check Stock

DCT Pen Blank Centering Vice – Pen Making Center Finder Tool for Marking Center When Drilling Wood Pen Blanks

  • LOCATE AND DRILL PEN BLANK CENTERS: The DCT Pen Blank Centering Vice – Pen Making Center Finder Tool for Marking Center When Drilling Wood Pen Blanks vertically holds and centers pen blanks up to 1.5 inches (3.8cm) square and makes center drilling of pen blanks a repeatable process that is easy.
  • NO MORE MARKING THE CENTER: Once clamped and centered under the chuck, it is quick and easy to drop in a blank and drill a centered hole.
  • You will appreciate not having to mark the center on each blank.
  • EASY SETUP: Unique support and threaded design that makes setting up the jig a simple one-time process.
  • There is no need to change the setup again to center and drill multiple pen blanks.
  • USE YOUR TOOLS: Use this vise with your existing drill press to drill a perfect center hole for the brass tube before putting the blank on a mandrel for turning on a lathe.
  • VARIOUS APPLICATIONS: Will hold both square and rectangular pen blanks up to 1.5 inches (3.8cm) square and can also be used for other applications such as wine stopper projects.
Check Stock

Aopin Forstner Drill Bits Professional Carbide Woodworking Hole Saw, Cutting Diameter 22mm, 2Pcs (Blue, Silver)

  • Applications: Can be used for drilling holes on wood and wood products perforation, plastic products, furniture, door hinge..
  • Features: Special heat treatment, cemented carbide. Arc design optimizes chip removal. two blade cutter head, Low cutting resistance. the design of the Forstner drill center point can precise positioning without slipping, sturdy round handle..
  • Instructions: Suitable for hand-held electric drills, portable percussion drills, CNC equipment, engraving machines, bench drills, vertical drilling machines, and other woodworking milling and drilling equipment..
  • Package Content: 2 x Carbide Forstner Bits..
Check Stock

7 Pieces Center Drill Bits Set M2 High Speed Steel 60-Degree Angle Center Drill Bits Kit Countersink Tools for Lathe Metalworking Size 1.0 1.5 2.0 2.5 3.0 4.0 5.0

  • Wide Range of Sizes: Including 7 Pieces of Plain Center Drill Bits Set range in size 1.0 1.5 2.0 2.5 3.0 4.0 5.0 to meet different needs.
  • Accurate: A 60-Degree Angle center drill is very useful in drilling accurate center holes, 60-degree countersink holes or starter holes for bigger drill bits in metal-working.
  • High Quality: Our center drill bits made of high quality M2 High speed steel, solid and high temperature wear resistant.
  • Widely Applicable: work with lathe machines and most electronic drills to drill holes in Steel, Iron, Alum, Carbon Steel, Brass and other tough material ranging from 170HB up to 200HB.
  • Worry Free: This Center Drill Bits set comes with a portable storage case for convenient use and store. If you encounter any problems with the products, please feel free to contact us.
Check Stock

THK Cross Roller Guide V6-600 VR6-600×41Z 6600T

  • There are 10pcs of this center drill bit, which is convenient and practical for user, easy to use..
  • This centering drill bit is made of high‑speed steel with high hardness and hardness..
  • The center drill is suitable for bench drills, milling machines, and machining centers..
  • The 3mm center drill is incisive, wear‑resistant, heat‑resistant, and has a long service life..
  • Adopt enlarged chip flute design is conducive to high‑speed operation and accelerate chip removal..
Check Stock

Educational Insights Design & Drill Activity Center

  • LET'S GET BUILDING! Kids power up their imaginations and build coordination skills as they drill & play with a toy drill, and chunky, kid-sized bolts....
  • STEM TOYS FOR 3 YEAR OLDS AND UP! Introduce your little builders to STEM, and early math skills with Design & Drill Activity Center. Children will....
  • BUILD FINE MOTOR SKILLS! Aim the toy drill, twist the screwdriver, or turn the wrench from your Design & Drill Activity Center to develop the fine....
  • INCLUDES: 120 chunky plastic bolts, reversible power drill, screwdriver, combination wrench, 2 drill bits, and 10 double-sided, easy-to-follow design....
  • SPARK MORE PLAY: Keep the fun (and learning!) going with FREE Design & Drill activities developed by teachers at Educational Insights..
Check Stock

1/4' Beadlock® Tenon Stock, (25) 1-1/2' Pieces

  • So Fast, So Easy, So Accurate. The arms of self centering dowel jig jig are an always-reliable parallelogram that never fails to find dead center. Simply align the precision-machined notch on the jig's center bar with the dowel location mark on your board, hold the jig and drill..
  • The second alignment feature lets you drill a series of equally spaced holes along the edge of a board. Just attach the supplied pin in the center bar, insert the pin in a hole and drill more holes..
  • Attach the jig's adjustable center bar end-stop for drilling two or three precisely spaced end grain holes. This feature allows perfect alignment of face frame stiles and top and bottom rails. The handy inch scale lets you accurately set the stop..
  • Adjustable width for different thick，For stock from 5/8" to a full 1” thick and more. The parallel arms open to accommodate stock up to 2.4” thick..
  • High quality aluminum (drill guide) and die steel(bushing),high hardness and strength,good wear-resistant and durable to use,the drill bushings is in imperial (inch) sizes,1/4" 3/8" 5/16" ,not metric..
Check Stock