Categories

Best Cnc Flame Cutting Controller

CNC Spoilboard Surfacing Router Bits, SIMILKY 1/2 inch Shank 2 inch Cutting Diameter, Slab Flattening Router Bit Planing Bit Wood Milling Cutter Planer Woodworking Tool

  • [4 WINGS WOOD CNC ROUTER BIT 1/2 SHANK] Precise 4 Wings can cut your project material quickly and cleanly.1/2 Inch Shank CNC Spoilboard Surfacing Router Bit, 1/2" Cutting height, 1/2" Cutting depth,2"(50.8mm) Cutting Diameter..
  • [HIGH-QUALITY CNC ROUTER BIT] The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
  • [WIDE RANGE OF APPLICATIONS] This professional bottom router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving.Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand)..
  • [APPLICABLE EQUIPMENT] Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. wood engraving machines, trimming machines, etc..
  • [APPLICABLE EQUIPMENT] Use on CNC and other automatic routers as well a....
Check Stock

Axe Cutting Wood with Impact Version 4

  • Excellent Motor: This machine is equipped with three 57 stepper motors and a 300W standard spindle motor to ensure a smooth operation. The 400 x 300 x 100 mm working area also contributes to an excellent cutting and milling performance..
  • Rigid Coupling & Ball Screw: Refined rigid coupling is capable to eliminate transmission error. X & Y axis ball screw and nuts can reduce friction and improve accuracy. Help you achieve higher performance and better control..
  • Redesigned Control Box: This cutting machine has an independent offline controller. You can adjust the XYZ axes and turn on or off the spindle manually. You can also connect it to a computer via the USB interface, implementing more steps..
  • Aluminum Alloy Board: The aluminum alloy operating panel allows users to wipe the engraving drills with oil or a small amount of water to achieve a cooling effect. Besides, it also features hard-wearing and never rust, prolonging life service..
  • Wide Application: This CNC router machine comes with 20 pcs drill bits. It can be used on many projects and materials, such as plastics, woods, soft aluminum, acrylics, PVC, PCB, etc..
Check Stock

MYSWEETY CNC 3018Pro-M Engraver Machine Kit, GRBL Control 3 Axis Mini DIY CNC Router Kit, Plastic Acrylic PCB PVC Wood Milling Engraving Machine, with Offline Controller and ER11 and 5mm Extension Rod

  • ⚒️【2-IN-1 CNC 3018 Pro-M】- CNC 3018pro-M DIY Mini CNC Machine features two 5mm acrylic baffles on each side of the machine so that you can safely monitor the engraving process. A great tool for entrance CNC. Able to curved text on daily materials easily. Great for those who are interested in CNC, helping you engrave the model efficiently..
  • ⚒️【Offline Controller】- The offline controller is 1G Capacity.You can control the CNC router without connecting to the computer. The CNC router can be placed wherever you want, such as garage and workshop..
  • ⚒️【New Control Board】- Integrated Driver Chip + Fixed Heat Sink + External Fan + Sturdy Casing to extend the life of the control board, Self-contained short circuit protection, Not easy to damage. 12 Months Warranty..
  • ⚒️【Versatile】- It can work on wood, bamboo, paper, leather, plastic, PCB, acrylic, metal surface paint, metal surface plating etc. It can not work on hard metal, iron, glass, 201/304 stainless steel, jewelry or silver, and other hard things.It is recommended to engrave 0.1-0.3mm each time..
  • ⚒️【Simple Assembly】- Assembly instructions are provided, but if you get stuck, contact us with any questions that arise. Thank you!.
Check Stock

SainSmart Genmtisu GRBL Controller Board for CNC Router Machine 3018-PROVer/ 3018-PROVer Mach3/ 3018-MX3

  • This controller board is compatible with Genmitsu CNC 3018-PROVer. If you have already had the Genmitsu CNC Router 3018-MX3/ 3018-PROVer Mach3, this controller board can help you turn Mach3 control to GRBL control..
  • Applicable Software: Grblcontrol (Candle), LaserGRBL, and other software that supports GRBL firmware, GRBL firmware version V1.1f..
  • USB interface communication, support 3-axis engraving, and laser module..
  • Input interface: X Y Z limit (HOME) interface, Z-axis tool return to zero, emergency stop switch interface, GRBL offline controller interface..
  • All control signals are isolated by optocoupler and have strong Anti-interference ability.
Check Stock

Stay Home [Explicit]

  • THE WORLD’S FIRST WALL MOUNTED CNC MACHINE KIT: its upright design provides a huge cutting space - up to 32sq ft - on a tiny footprint. By eliminating the heavy and expensive components of traditional CNC milling machines, the M2 becomes a purpose-built, making machine without all the added fuss. It cuts sheets of nearly any material such as wood, metals, plastic and foam, so that you can craft anything you like. Projects made with our M2 include benches, signs, lamps, tables, and even a guitar!.
  • FULL KIT: M2 is a 3-Axis wall-mounted CNC cutting machine and comes with laser-cut, steel and powder coated mounting brackets, lead screw z-axis, built-in dust collection port, three ⅛‘’ router bits that offer extremely precise cuts. The router is not included. Compatible routers include: DeWalt611, Bosch Colt, Makita RT0700CX and EU equivalents to each of the above..
  • OPEN-SOURCE SOFTWARE: The M2 is designed to be used with Makerverse open-source software which is included with your purchase. Makerverse is a GRBL CNC control application that has custom controls made specifically for all Maker Made products: the Maslow, M2 and 300x. The application is derived from the open source CNCjs project and will continue to receive new features and updates f....
Check Stock

SainSmart Genmitsu 10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8' Shank

  • ➤Cutting Edge Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm), 10Pcs..
  • : ➤Advantage: With sufficient flexural strength and wear resistance, which ensure high work efficiency. Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches..
  • ➤Material: Using ultra-fine grained carbide material, with good milling and cutting performance..
  • ➤Application: PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing..
  • ➤Genmitsu CNC Bits Selection Guide: To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
Check Stock

EANOSIC 30 Degree V Groove Router Bit 1/4 Inch Shank, Nano Blue Coated Solid Carbide V Router Bit for CNC Engraving and Carving

  • INDUSTRIAL GRADE CNC Engraving Bit: Shank: 1/4”.
  • SOLID CARBIDE AND NANO BLUE COATED: The 30 degree v groove router bit is made of solid carbide. And nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
  • SUPER LONG LIF The nano new design coating could provide up to 2.5X normal life and a much more smooth cutting edge than uncoated bits..
  • These are mainly used for engraving machine and CNC machine. A power tool for 2D sculpture, 3D sculpture. perfect for Signmaking, CNC Lettering, V Groove Engraving Artwork & Miter Fold Router Bits..
  • The CNC Engraving Bit used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic, aluminum and etc..
Check Stock

18/4 AWG Shielded CNC Wire (50FT) — Flexible Stranded Shielded 18-Gauge 4-Conductor Cable for Stepper Motors, CNC Machines, NEMA Motors, VFD Spindles, CNC Routers, 3D Printers and more!

  • RESILIENT & FLEXIBLE: Stepper motor cable designed to bend smoothly in your CNC or 3D printer chain!.
  • SHIELDED 4 CONDUCTOR WIRE: Reduce interference for your CNC spindle motor or stepper motor driver!.
  • BEST RESULTS: Shielded wire means higher quality for your 3D Printer, CNC Machine or CNC Controller..
  • GREAT FOR All STEPPER MOTORS: Nema 17 Stepper Motor, Nema 23 Stepper Motor, Stepper Driver, & more!.
  • STEPPER MOTOR WIRE: The perfect upgrade to any CNC Kit, CNC Router Kit, or CNC Stepper Motor Kit..
Check Stock

LAIWOO CNC Router Bits Set 1/4(6mm) Shank, Engraving Wood Carving Router Bit 6mm & 4mm, 60° & 90° V-Groove, 20° Profile bit, 15° Detail Carving Bit, Tungsten Steel - 4PCS

  • 【PREMIUM MATERIAL】 Our cnc router bits is made of high hardness and wear-resistant tungsten steel, which is not only sharper but also less prone to breakage compared with ordinary carbide cnc bits, which will improve your work efficiency and completion..
  • 【EFFICIENT CUTTING PERFORMANCE】 These precision mirror-finished cnc engraving bits with scientific chip groove design prevents wood chips from affecting your work. Also the cutting speed is fast and the cutting surface is flat & smooth..
  • 【INVIDUAL PACKAGE】 4pcs package, each one is individually packaged for easier storage. Package contains 1 x 15° detail carver, 1 x 20° profile bit, 60° and 90° V groove bits..
  • 【WIDE APPLICATION】 These router bits for cnc are suitable for MDF, PVC, acrylic, solid wood, plywood, organic board, etc. Widely used for cutting/carving/engraving/grooving/drilling/positioning/roughing/milling. More suitable for wood carving..
  • 【PERFECT SERVICE】 We value our customers' experience, if you have any questions, our customer service team will reply within 24 hours. In addition, you will enjoy 12 months warranty, any quality problem we will solve for you!.
Check Stock

Freud 87-208 8Piece CNC Router Bit General Purpose Set, Multi, One Size

  • Advanced cutting geometry for superior chip evacuation and finish quality.
  • Enhanced TiCo super density Carbide with chromium designed and manufactured by Freud for 2x cutting life.
  • Specifically designed for CNC Makers to deliver long cutting life, maximum durability and high quality finish.
  • Each bit in tis set was designed for CNC machines to deliver a long cutting life, maximum durability and a high quality finish. Ideal for sign making, lettering and engraving in a variety of materials like wood, plastics, composites and more..
Check Stock

500W CNC Router Machine, MYSWEETY 3 Axis 4540 CNC Metal Engraving Milling Machine for Carving Cutting Wood Acrylic MDF PCB Plastic, Working Area: 430*390*90mm(16.9*15.4*3.5inch)

  • ...gency stop, and wires are integrated into a newly designed box for easy and safe operation. You just need several installation steps and wiring to start carving your projects.
  • 【Package Included】 Comes with everything you need. This engraving machine set included all parts to assemble 4540 cnc machine, integrated controller box, touchscreen cnc offline controller, Z-probe, CNC router bits, English manual, and more. We also provide a 1-year warranty and fantastic after-sales service, If any questions, please contact us as soon as possible.
Check Stock

MNA 1/4 Inch Shank CNC Spoilboard Surfacing Router Bit,4PCS Router Bit Set,4 Wings,1-37/64-Inch Cutting Diameter,1/4' 5/16' 3/8' 1/2' Milling Depth

  • MNA CNC spoilboard surfacing router bit is ideal for fast removal of material over a large surface area leaving an improved finish at the bottom of the cut..
  • 4 WINGS WOOD CNC ROUTER BIT:1/4-Inch Shank Rabbet Slot Cutter Router Bit Set, Shank Size: 1/4", Cutting Diameter: 1-37/64", Cutting Depth: 1/4"-1/2" , Cutting Height: 1/4", 5/16", 3/8", 1/2".
  • 4 Different cutting height router bits can use as spoilboard surfacing router bits or rabbet slot grooving bits.
  • American industry classification C3 Carbide. Fit for all types of wood material, such as: MDF, hardwood, softwood, and particle board..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..
Check Stock

SpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • The Square CNC End Mill With Flat Top 4-Flute, Carbide with TiAlN Coated Gives outstanding cutting performance and wear resistance.
  • For CNC, Excellent performance to cut Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc, Up to HRC 55..
  • The Route Bit Suit for CNC, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc. For better.
Check Stock