Categories

Best Cnc Gas Cutting Tip

WeldingCity Propane/Natural Gas/LP Two Piece General Purpose Cutting Tip 3-GPN Size 0 for Victor Torch | Pack of 1

  • Premium quality brand-new propane/natural gas two-piece general purpose cutting tip 3-GPN series for Victor hand and machine torch. Pack of 1 cutting....
  • Available nominal tip orifices: 000, 00, 0, 1, 2, 3, 4 and 5..
  • Medium preheat for hand/machine cutting use with propane/natural gas..
  • Fits Victor cutting attachment series: CA1260/CA1350/CA2060/C1450 and other aftermarket cutting heads compatible with Victor apparatus..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity Propane/Natural Gas/LP Two Piece General Purpose Cutting Tip GPN-3 Size 3 for Victor Torch | Pack of 1

  • Premium quality brand-new propane/natural gas two-piece general purpose cutting tip GPN series for Victor hand and machine torch. Pack of 1 cutting....
  • Available nominal tip orifices: 000, 00, 0, 1, 2, 3, 4, 5 and 6..
  • Medium preheat for hand/machine cutting use with propane/natural gas..
  • Fits Victor cutting attachment series: CA2460/CA1060/ST/SST/1400C and other aftermarket cutting heads compatible with Victor apparatus..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

EANOSIC 30 Degree V Groove Router Bit 1/4 Inch Shank, Nano Blue Coated Solid Carbide V Router Bit for CNC Engraving and Carving

  • INDUSTRIAL GRADE CNC Engraving Bit: Shank: 1/4”.
  • SOLID CARBIDE AND NANO BLUE COATED: The 30 degree v groove router bit is made of solid carbide. And nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
  • SUPER LONG LIF The nano new design coating could provide up to 2.5X normal life and a much more smooth cutting edge than uncoated bits..
  • These are mainly used for engraving machine and CNC machine. A power tool for 2D sculpture, 3D sculpture. perfect for Signmaking, CNC Lettering, V Groove Engraving Artwork & Miter Fold Router Bits..
  • The CNC Engraving Bit used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic, aluminum and etc..
Check Stock

WeldingCity Pack of 2 Propane/Natural Gas General Purpose Cutting Tip 3-GPN Size 2 for Victor Gas Torch

  • Pack of 2 premium quality brand-new propane/natural gas two-piece general purpose cutting tip 3-GPN series for Victor hand and machine torch..
  • Available nominal tip orifices: 000, 00, 0, 1, 2, 3, 4 and 5..
  • Medium preheat for hand/machine cutting use with propane/natural gas..
  • Fits Victor cutting attachment series: CA1260/CA1350/CA2060/C1450 and other aftermarket cutting heads compatible with Victor apparatus..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity Pack of 2 Propane/Natural Gas General Purpose Cutting Tip 3-GPN Size 1 for Victor Gas Torch

  • Pack of 2 premium quality brand-new propane/natural gas two-piece general purpose cutting tip 3-GPN series for Victor hand and machine torch..
  • Available nominal tip orifices: 000, 00, 0, 1, 2, 3, 4 and 5..
  • Medium preheat for hand/machine cutting use with propane/natural gas..
  • Fits Victor cutting attachment series: CA1260/CA1350/CA2060/C1450 and other aftermarket cutting heads compatible with Victor apparatus..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Victor Technologies 0384-2691 Medalist 350 System Heavy Duty Cutting System, Acetylene Gas Service, G350-15-300 Fuel Gas Regulator

  • Gas Service: Acetylene, Oxygen Regulators: G350-150-540, Fuel Gas Regulator: G350-15-300.
  • Welding Nozzle: 2-UM-350.Maximum Cutting: 8 inches.Maximum Welding: 3 inches.
  • CA411-1 Cutting Attachment.Cuts up to 3/8" / 12.7mm 6" / 76.2mm with optional tips.
  • industries-Industrial and general fabrication, light fabrication, repair and maintenance,structural steel fabricationDescriptionThis heavy/medium duty system cuts up to 3/4" (19.1 mm) or 6" (152.4 mm) with optional tips. It welds up to 1/8" (3.2 mm) or 3" (76.2 mm) with optional nozzles. Includes: Heavy duty construction.
  • WH411C torch handle with built-in check valves.
Check Stock

Victor Technologies 0381-1987 ST 400C Series Heavy Duty Straight Cutting Torch

  • Gas service: for use with all fuel Gas with appropriate tip, 5 psig and above.
  • Cutting capacity: up to 6'' (300.0 mm) tip series: 1.
Check Stock

SÜA 25' Heavy Duty Straight Cutting Torch 90º Head

  • Die Forged Brass and Stainless Steel Heavy Duty OxyFuel Cutting Torch Compatible with Harris.
  • Uses Series 6290NX Propane and 6290NXP Propylene Cutting Tips - Gas Service: Oxygen and Propane/Propylene with appropriate tips..
  • Can cut up to 3" (76 mm), with included 6290NX-3 (propane), tip and up to 8" (203 mm), with additional tips. See tip chart for reference.
  • Head Angle: 90 ° - Weight of Torch: 3 Lb - Gas Inlets 9/16" - 18 R and L (B-B Connectors for Twin Welding Hose).
Check Stock

Heavy Duty Cutting Torch, Oxygen Propane/Acetylene Welding Torch, Flame Torch Handle & Cutting Attachment with Propane Tip

  • 【HIGH PERFORMANCE】This cutting torch is mainly used to finish heavy duty work. With this kit to cut metal with thickness 1/8-inch to 5-inch and weld up to 3/8 inch, can easily finish the work ..
  • 【MULTIPLE GAS OPTIONS】 Cutting torch and handle are ready for multiple gas options.
  • Oxy-Acetylene, propane or other fuel. 2 fittings on the handle mix up oxygen and combustible gas through standard hose (inner Dia.6mm) to get cutting flame . The cutting nozzles may be different depends on the gas you are using.
  • 【HIGH QUALITY AND STABILITY】Adopts pure brass valve, stainless steel pressure handle, integrated adjustment handwheel and stainless steel stem to offer longer lifespan and higher precision . Built in non-return valve , more safety to use it ..
  • 【FULL SET】Full kit include torch handle，cutting torch and propane torch tip. Total assembled length 16inch (40mm), handle length 4.2 inch, which is very convenient to finish welding and cutting work..
  • 【WIDELY APPLICATION】Widely used in workshops, mechanical maintenance, cutting metal and welding ..
Check Stock

DNA Motoring CBE-AI942RS-BT CBEAI942RSBT Stainless Steel Catback Exhaust System

  • Made of high quality T-304 Stainless Steel..
  • TIG welded CNC machine flange for resistance against pressure and corrosion..
  • Aggressive deep and smooth tone sound while ensures smooth exhaust gas flow..
  • Muffler tip type: rounded tip/ tip diameter: 4"/ inlet/ outlet size: 2.5"/ removable silencer included.
Check Stock

2021 PowerPlasma 52i 50 Amp CNC compatible plasma cutter

  • Redesigned new PowerPlasma 52i model with NEW upgraded IPT-60 torch.
  • NEW! Gouge Function. 50 Amps of professional cutting power.
  • Blow-back start technology, Pilot Arc / 110/220v Dual Voltage.
  • CNC port for light gauge CNC use / T2/T4 / TIP SAVER OPTION.
  • Adjustable Post Flow timer of up to 60 seconds exends consumable and torch life.
Check Stock

CRAFTSMAN 140cc 9-Inch Pull Start Tri-Tip Gas Powered Edger

  • 140CC GAS ENGINE: Efficient gas engine comes equipped with recoil start to tackle unwanted vegetation, thick brush, and even tall weeds..
  • 9-INCH TRI-TIP BLADE: Precise sturdy tri-tip blade allows you trim quickly in one quick sweep on the areas that define the grassy areas of your yard..
  • DURABLE WHEELS: Built with 7” Front and 8” Rear Pinwheels for easier maneuvering..
  • PRECISE CUTTING: Perfect for trimming borders in tighter spaces on edges of driveways, pathways, and sidewalks..
  • LOOP HANDLE: Operate your unit with more comfort.Minimum Cutting Height:1.25 inches.
Check Stock

Craftsman 208cc 12' Pull Start Front Tine Tiller

  • 140CC GAS ENGINE: Efficient gas engine comes equipped with recoil start..
  • 9-INCH TRI-TIP BLADE: Precise sturdy tri-tip blade allows you trim quickly..
  • DURABLE WHEELS: Built with 7” front and 8” rear pinwheels for easier maneuvering around your yard..
  • PRECISE CUTTING: Perfect for trimming in tighter spaces on edges of driveways and pathways..
  • LOOP HANDLE: Operate your unit with more comfort..
Check Stock