Categories

Best Cnc Horizontal Lathe

ALTBET MT2 Live Center 2MT 60 Degree Morse Taper Precision 0.000197'' CNC Long Spindle Lathe Tool

  • Made of high quality tool steel, high hardness, durable in use.
  • Features excellent dustproof and liquid proof seal, long service life..
  • High accuracy, high rigidity and high wear resistance..
  • Professional manufacturing for good working performance.
  • Suitable for high speed lathe, CNC lathe, and general manual lathe..
Check Stock

Teak Tuning CNC Polyurethane Fingerboard Bearing Wheels, White - Set of 4 Wheels - Durable Material with a Hard Durometer

  • CNC LATHE WHEELS || Set of four CNC lathe fingerboard bearing wheels in White.
  • DURABLE || Each wheel features a durable, but smooth surface, and a durometer of 100D.
  • SMOOTH RIDING || Each wheel contains a single metal bearing that enables the wheel to spin fast and ride smooth.
  • COMPATIBILITY || Compatible with all fingerboard trucks including Blackriver Trucks, Y-Trucks, Dynamic Trucks, and Tech Deck Trucks.
  • FOR RIDERS OF ALL SKILL LEVELS || Perfect for riders of all skill levels. Includes a free Teak Tuning sticker. Choking Hazard: Small Parts. Not suitable for children under the age of 14.
Check Stock

ER11 CNC Collet 3Pcs 1/8 inch 3.175mm 4mm 6mm Spring Collet Workholding Engraving Collet Milling Lathe Tool

  • ☑【Description】-These spring collets are made of high quality 65Mn spring steel for CNC milling lathe tool and work-holding engraving machine..
  • ☑【High Quality】-This Spring Collet Fine workmanship, good elasticity, high precision and run-out tolerance is less than 0.008mm..
  • ☑【Convience】-Each collet is marked clearly so you can easily distinguish them..
  • ☑【Best Choice】-Great collet for CNC milling lathe tool and work-holding engraving machine..
  • ☑【Note】-Collet must be placed into collet chuck nut before inserting into collet chuck..
Check Stock

Simple Woodturning Tools Carbide Lathe Turning Tool Set of 3 Full Size with 17 Foam Grip Handles USA Made

  • American Made Set of 3 Full Size Carbide Lathe Turning Tools with Color Coded Handles: Hollower, Detailer & Rougher.
  • 17" long solid aluminum foam grip tool handles are color coded for easy tool identification. Overall tool & handle length is 26.5"..
  • This set of carbide lathe tools is ideal for turners at any skill level. With carbide it's all turning and no sharpening so you can begin turning....
  • Each lathe tool is 1/2" square CNC machined by Harrison Specialties in Ramsey, Minnesota. These tools are designed to be kept flat on the tool rest....
  • Each lathe tool features a carbide tip with multiple sharp edges that can be rotated several times. A Torx star wrench is included..
Check Stock

MT2 Live Center,MT2 High Accuracy Triple Bearing Live Center for Metal Lathe Turning,Live Revolving Center High Precision Medium Turning Tools Parts for Lathe Tailstock Machine

  • Made of high quality metal, high hardness, durable in use..
  • Features excellent dustproof and liquid proof seal, long service life..
  • High accuracy, high rigidity and high wear resistance..
  • Professional manufacturing for good working performance..
  • Suitable for high speed lathe, CNC lathe, and general manual lathe..
Check Stock

Milling Machine Linear Scale, 170mm High Accuracy Linear Encoder for Milling Lathe Machine

  • Supports automatic operation including dry running and single step operation, manual operation of the CNC lathe control including motor CW/CCW, back to program 0, back to mechanical 0 and output control..
  • The interface of the direct output terminals on the back reduces the transmission board. The terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated I/O port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can power the system directly using the USB cable. This is practical for the transfer of the start screen and the program as well as for learning and operation.
  • With 20 control commands, the external manual supports the control motor CW/CCW, start, pause, alarm, emergency stop etc. The parameters of the CNC lathe control include system parameters, system self-test, I/O settings, user and manufacturer password management etc. and it supports also editing, reading, deleting and saving programs..
Check Stock

RazoRock Baby Smooth Double Edge Safety Razor

  • Build: CNC machined head (billet), CNC lathe turned handle (rod).
  • Complete Length : ~ 98 mm, Handle Length: 90 mm, Handle Diameter: 13 mm.
Check Stock

Upgraded Mini Lathe 7\X14\

  • ... post forwards/backwards by turn blade adjustors with accurate scales clockwise/anticlockwise..
  • 【SIMPLE OPERATION】- You can move the tailstock forth and back by loose the fix handle.
  • The MT2 dead center can be adjusted by loose quill lock and turn tailstock handwheel.The Cross Slide can move freely by turning the horizontal blade switch to the left and turn handle.The two holes on the top and the side can be adjusted with a wrench to fix the handle and the dead center respectively..
Check Stock

Straight Shank Tool Holder, 45-46HRC Hardness 1-7mm Clamping Range 40Cr and Carbon Steel CNC Milling Extension Rod for Lathe Device(C16-ER11A-100L)

  • Supports automatic operation including dry running and single step operation, manual operation of the CNC lathe control including motor CW/CCW, back to program 0, back to mechanical 0 and output control..
  • The interface of the direct output terminals on the back reduces the transmission board. The terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated I/O port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can power the system directly using the USB cable. This is practical for the transfer of the start screen and the program as well as for learning and operation.
  • With 20 control commands, the external manual supports the control motor CW/CCW, start, pause, alarm, emergency stop etc. The parameters of the CNC lathe control include system parameters, system self-test, I/O settings, user and manufacturer password management etc. and it supports also editing, reading, deleting and saving programs..
Check Stock

Mechanical Tool Aluminum Alloy Synchronous Wheel XL Type 25 Teeth Power Transmission Accessories for Milling Machine for Drilling Machine for CNC Engine Lathe(25 Teeth 5mm Hole XL synchronous Wheel)

  • Supports automatic operation including dry running and single step operation, manual operation of the CNC lathe control including motor CW/CCW, back to program 0, back to mechanical 0 and output control..
  • The interface of the direct output terminals on the back reduces the transmission board. The terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated I/O port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can power the system directly using the USB cable. This is practical for the transfer of the start screen and the program as well as for learning and operation.
  • With 20 control commands, the external manual supports the control motor CW/CCW, start, pause, alarm, emergency stop etc. The parameters of the CNC lathe control include system parameters, system self-test, I/O settings, user and manufacturer password management etc. and it supports also editing, reading, deleting and saving programs..
Check Stock

【The Best Deal】OriGlam Mist Coolant Mist Lubrication, Spray System Unit Used for CNC Lathe Milling Drill Machine

  • √ Multi-function – Set multi function all in one,cooling,lubrication and blowing the metal chips, gas processing chips are blown away, working safer..
  • √ Great Value – Save 60-80% lubricants compared with the oldest lubrication tube..
  • √ Easy Operation – Engraving machine spray cooling,Special design,direction of rotation,easy to operate..
  • √ Long-term Use – Standard fixing device,fine spray port, long life. Cooling stone/metal/ceramic tile engraving machine..
  • √ Widely Used – Great for CNC Lathe Milling Drill Machine. Usually used in lathe, milling, grinding, drilling, boring, and tapping processing..
Check Stock

ACTOOLS Lathe Milling Vertical Slide & 50 mm Self Centering Vise Vice-Engineering Tools

  • Lathe Vertical Milling Slide T-Slotted Caste Iron Bed of 125 mm X 100 mm in milling slide.
  • Vertical milling slide movement is approx 80 mm. Has 3 T- Slots on Table 10 mm Wide at the top of the T is 15 mm wide at the bottom of the Tee allows milling on your lathe machine.
  • Hardened Jaws with Horizontal / vertical Vee.
  • Maximum Jaw Opening 55 mm, Jaw Depth 28 mm.
  • Supplied with a 50 mm Caste Iron Self Centering Vice.
Check Stock

SainSmart Genmitsu 7Pcs ER11 Spring Collet Set for CNC Engraving Milling Lathe Tool 1.0mm-7.0mm

  • ➤7Pcs ER11 Collet Set Gripping Range: 1mm to 7mm (1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm).
  • ➤Perfect for CNC milling lathe tool and work-holding engraving machine. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
Check Stock