Categories

Best Cnc Machined Part

Innovative Performance Chip/Power Programmer compatible with Volkswagen Golf & GTI 1.4L 1.6L 1.8L 1.9L 2.0L 2.5L 2.8L and 3.2L - Improve Your Fuel Mileage Save Gas & Gain MPG Increase HP & TQ!

  • Scope of Application : Acting on 1.8 2.0 TSFI Engines EA888, Fit for IS12, IS20, IS38 IHI turbocharger..
  • Lightweight Material & CNC Machined: The inlet elbow is made from light weight aluminium tube with CNC machined connections and a laser cut bracket,....
  • Max gains Design: Max gains 8-10 HP, Its made from aluminum, allowing for an organically shaped inlet that transitions gradually over a large....
  • O-Ring Kit: Supplied with the kit is a replacement O-ring in case the standard part is worn or perished. This part allows for increased potential....
  • Customer Service: If you have any question about our product, please contact us right away, we can handle any problems.We value your shopping....
Check Stock

HONGK- Brake Pedal Compatible with Suzuki Volusia 800 Marauder Boulevard M50 C50 Intruder 1500L C90 [B01C0SZ2N4]

  • 【Fitment】 Fit for KX250F 2006-2018 KX250 2019.
  • The aluminum brake pedal uses an extremely tough forged aluminum arm with a CNC machined toe tip to make this brake pedal one of the strongest you can buy for your motorcycle..
  • The CNC machined tip is spring-loaded and rotates to prevents damage from crashes and impacts..
  • The CNC tip also features stainless steel cleats for maximum traction..
Check Stock

BW USA Berm Platform Bike Pedals - Lightweight Aluminum Flat Pedals for MTB and BMX - Green

  • CNC MACHINED 6061 ALUMINIUM BODY - Machined aluminium body for a lightweight, durable construction..
  • 113 X 105MM 9/16 CNC MACHINED CR-MO AXLE - Durable Chromalloy axles make for solid long lasting pedals. WITH10 REPLACEABLE STEEL TRACTION PINS PER SIDE - Give yourself a place to hang on with 10 traction pins that bite in and stick your shoes to the pedal. The generously sized platform offers stability, comfort and grip while the low-profile design gives added ground clearance..
  • 9/16 CNC MACHINED CR-MO AXLE - Durable Chromalloy axles make for solid long lasting pedals..
  • SEALED BEARINGS - Sealed bearings keep the elements out and contribute to long-lasting, smooth rolling pedals..
  • LIGHTWEIGHT - At just 205g each, these pedals weigh less than many higher priced competing models..
Check Stock

BW USA Berm Platform Bike Pedals – Lightweight Aluminum Flat Pedals for MTB and BMX – Orange

  • CNC MACHINED 6061 ALUMINIUM BODY – Machined aluminium body for a lightweight, durable construction..
  • 113 X 105MM 9/16 CNC MACHINED CR-MO AXLE – Durable Chromalloy axles make for solid long lasting pedals. WITH10 REPLACEABLE STEEL TRACTION PINS PER SIDE – Give yourself a place to hang on with 10 traction pins that bite in and stick your shoes to the pedal. The generously sized platform offers stability, comfort and grip while the low-profile design gives added ground clearance..
  • 9/16 CNC MACHINED CR-MO AXLE – Durable Chromalloy axles make for solid long lasting pedals..
  • SEALED BEARINGS – Sealed bearings keep the elements out and contribute to long-lasting, smooth rolling pedals..
  • LIGHTWEIGHT – At just 205g each, these pedals weigh less than many higher priced competing models..
Check Stock

Vals e Lönn

  • APPLICATIONS - Compatible with Cummins ISX12, X15 and ISX15 engines with single overhead cam.
  • BENEFITS - Use to remove and install front crankshaft seal and wear sleeve without damaging the seal and leakage.
  • REPLACEMENT - This is a high-quality aftermarket product. Directly replace part numbers 4918991. Each part is manufactured to OEM specifications and....
  • QUALITY - Advanced CNC machined heavy duty steel with black anodized finish.
  • INCLUDES - The 4918991 crankshaft seal kit includes:(1)Sleeve Remover.
Check Stock

Aluminum Suspension Links Set for AXIAL SCX24 AXI90081 AXI00004 1/24 RC Crawler Car Metal Link Rod Tie Rod Suspension Set AX31613 Accessories Aluminum Linkage Suspension Links Set

  • Compatibility: this aluminum suspension links set is a replacement of Axial stock part AXI31613 suspension links, compatible with 5.25 inch/ 133.5 mm wheelbase Axial SCX24 vehicles.
  • Please confirm whether the product size is what you need according to the picture.
  • There may be errors in the size, please place an order carefully.
  • Function: this aluminum suspension link is compatible with Axial SCX24 Deadbolt AXI90081, B-17 Betty AXI00004, intended to replace stock plastic links, equivalent to parts of AX31613.
  • Nice performance: made of quality aluminum, the suspension rod is machined by precision CNC for light weight and durability, making your RC crawler car more rugged with this aluminum link kit.
  • Package includes: you will get 6 pieces of aluminum suspension links, including short, medium, and long ones, 1 piece of Y-Links, 13 pieces of screws, together with a hex wrench.
  • CNC machined for precision, helps improve the performance in place of the original part.
  • Note: this set of suspension Links does not fit AXI00001 C10, AXI00002 JEEP.
  • Only the suspension links, screws and hex wrench are included, other products are not included.
  • Please don't put the front and back wrong.
Check Stock

Element Case Black Ops Elite Case for iPhone 11 Pro- Black (EMT-322-224EX-01)

  • Drop-shock body - exclusive impact absorbing three-layer design (Aluminum polycarbonate TPU) dissipates energy to withstand extreme impact.
  • Cnc machined aluminum - Side rails on the chassis are CNC machined from aircraft grade aluminum then bead blasted and “hard anodized” for a super tough Stealth finish.
  • G10 reinforced back plate - CNC machined military grade glass composite used to create a chassis that resists twisting and bending.
  • Tactical holster included - Conveniently carry your phone while protecting it from the elements Features heavy-duty 600D nylon construction and Velcro closure top.
  • Deep pocket clip attachment - PVD coated stainless steel with extended LENGTH for additional grip and deeper fit into pockets.
Check Stock

REEFS RC 422HDv2 Servo Winch with Built in Controller, SEHREEFS43

  • Reef's RC REEFS43 - 422HDv2 Servo Winch & Built In Controller.
  • Features: "Submarine Waterproof" 7075 Aluminum CNC-Machined Spool w/Clear Finish 7' Silicone Coated Steel Braided Line, w/Scale Recovery Hook Internal Steel Gears All CNC Aluminum Casing Anodized Color: REEFS GRAY.
  • Includes: (1) Servo Winch with Built in Controller.
  • Specs: Bearing Type: 2BB Operating Voltage: 4.8V-8.4V Weight: 2.84oz Dimension: 1.57" x .79" x 1.5" (LxWxH) Torque: 405oz @ 6.0v / 450oz @ 7.4v / 480oz @ 8.4v Speed: .11sec @ 6.0v / .10sec @ 7.4v / .09sec @ 8.4v Spline: 25T.
  • Part number(s) included (in factory packaging): REEFS43.
Check Stock

BC Lightweight Aluminum Bike Pedals - Great for MTB, BMX, Downhill - Wide Flat Platform with Removable Grip Pins - 9/16" Cr-Mo Spindle - Red

  • CNC MACHINED 6061 ALUMINIUM BODY - Machined aluminium body for a lightweight, durable construction..
  • 113 X 105MM 9/16 CNC MACHINED CR-MO AXLE - Durable Chromalloy axles make for solid long lasting pedals. WITH10 REPLACEABLE STEEL TRACTION PINS PER SIDE - Give yourself a place to hang on with 10 traction pins that bite in and stick your shoes to the pedal. The generously sized platform offers stability, comfort and grip while the low-profile design gives added ground clearance..
  • 9/16 CNC MACHINED CR-MO AXLE - Durable Chromalloy axles make for solid long lasting pedals..
  • SEALED BEARINGS - Sealed bearings keep the elements out and contribute to long-lasting, smooth rolling pedals..
  • LIGHTWEIGHT - At just 205g each, these pedals weigh less than many higher priced competing models..
Check Stock

Blowjob,Assjob,Cumjob [Explicit]

  • ◙ This is not a listing for an individual Airsoft part or component. NO parts or components are designed for real assault weapons. Batteries, optics, and other accessories NOT included by default unless stated. Please check the description AND bulletpoints below carefully (Click on Show More if available). Federally mandated blaze orange muzzle tip is preinstalled. Some assembly may be required, especially on custom builds and some larger sized Airsoft guns. ◙.
  • CNC finished aluminum alloy F1 BDR-15 3G skeletonized receiver copies the styling cues of the original rifle.
  • CNC machined aluminum C7K Countered KeyMod handguard allows for mounting of a vast variety of accessories, full length top rail accepts all common 20mm accessories.
  • EMG special edition fully-upgradeable quick spring change "eSilver Edge" gearbox.
  • High Efficiency gearbox only pulls 11amps at ~380 FPS, making this one of the most efficient gearboxes currently on the market.
Check Stock

Story of a Lie

  • ◙ This is not a listing for an individual Airsoft part or component. NO parts or components are designed for real assault weapons. Batteries, optics, and other accessories NOT included by default unless stated. Please check the description AND bulletpoints below carefully (Click on Show More if available). Federally mandated blaze orange muzzle tip is preinstalled. Some assembly may be required, especially on custom builds and some larger sized Airsoft guns. ◙.
  • CNC finished aluminum alloy F1 BDR-15 3G skeletonized receiver copies the styling cues of the original rifle.
  • CNC machined aluminum C7K Countered KeyMod handguard allows for mounting of a vast variety of accessories, full length top rail accepts all common 20mm accessories.
  • EMG special edition fully-upgradeable quick spring change "eSilver Edge" gearbox.
  • High Efficiency gearbox only pulls 11amps at ~380 FPS, making this one of the most efficient gearboxes currently on the market.
Check Stock

Atomik RC Alloy Rear Skid Plate, Grey fits The 1/10 E-Revo and Other Models - Replaces Part 5337

  • Precision CNC Machined for Factory Spec Fitment..
  • Hardened Billet 6061 Aluminum for Lightweight and Durable Performance..
  • Atomik RC Offers a Full Line of Hop Ups for your Traxxas Model, Available in Blue, Red, and Gunmetal.
  • Also Fits: Traxxas Revo 3.3, 1/10 Revo, 1/10 Slayer 4X4.
  • Easy Upgrade from Original Part. Replaces Traxxas Part 5337..
Check Stock

WoodRiver Dovetail Marker 2.0

  • 4 different proportioned angles: 1:5, 1:6, 1:8, 1:10.
  • Looking for the perfect Holiday Gift? WoodRiver has the best selection of saws, planes, hand tools, chisel and more. Plus we’ve got a great selection of woodworking kits. We’re part of Woodcraft, and our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans for the holidays..
Check Stock