Categories

Best Cnc Machined Swingarm

RENO SP1-M6 Aluminum Motorcycle Swingarm Spools Slider PRO Compatible with Select Models Black 2 Pcs

  • [Safe & Durable] : RENO swingarm slider used 6061 aviation aluminum strong safety and anti-break, hard-anodized outer layer protects against fading or rusting..
  • [Zero Error Cutting] : Using CNC cutting technology, screws and bolts fit perfectly for hassle-free, fast and stable installation..
  • [Stable Support] : RENO spool can easily lift and stabilize the motorcycle, avoid damaging the motorcycle body when parking or repairing, and better protect your car..
  • [Firmly Install] : Swingarm spools slider is smooth and flat, increasing the force bearing area, and can be firmly installed to prevent the swing arm spool screw from loosening and slipping..
  • [Installation Tips] : Only compatible with 6MM bolt screws, please measure your bolt hole size correctly before purchasing or refer to the fitment guide. If the spool stand is not flush, add the included washer to install..
Check Stock

HONGK- Brake Pedal Compatible with Suzuki Volusia 800 Marauder Boulevard M50 C50 Intruder 1500L C90 [B01C0SZ2N4]

  • 【Fitment】 Fit for KX250F 2006-2018 KX250 2019.
  • The aluminum brake pedal uses an extremely tough forged aluminum arm with a CNC machined toe tip to make this brake pedal one of the strongest you can buy for your motorcycle..
  • The CNC machined tip is spring-loaded and rotates to prevents damage from crashes and impacts..
  • The CNC tip also features stainless steel cleats for maximum traction..
Check Stock

BW USA Berm Platform Bike Pedals - Lightweight Aluminum Flat Pedals for MTB and BMX - Green

  • CNC MACHINED 6061 ALUMINIUM BODY - Machined aluminium body for a lightweight, durable construction..
  • 113 X 105MM 9/16 CNC MACHINED CR-MO AXLE - Durable Chromalloy axles make for solid long lasting pedals. WITH10 REPLACEABLE STEEL TRACTION PINS PER SIDE - Give yourself a place to hang on with 10 traction pins that bite in and stick your shoes to the pedal. The generously sized platform offers stability, comfort and grip while the low-profile design gives added ground clearance..
  • 9/16 CNC MACHINED CR-MO AXLE - Durable Chromalloy axles make for solid long lasting pedals..
  • SEALED BEARINGS - Sealed bearings keep the elements out and contribute to long-lasting, smooth rolling pedals..
  • LIGHTWEIGHT - At just 205g each, these pedals weigh less than many higher priced competing models..
Check Stock

BW USA Berm Platform Bike Pedals – Lightweight Aluminum Flat Pedals for MTB and BMX – Orange

  • CNC MACHINED 6061 ALUMINIUM BODY – Machined aluminium body for a lightweight, durable construction..
  • 113 X 105MM 9/16 CNC MACHINED CR-MO AXLE – Durable Chromalloy axles make for solid long lasting pedals. WITH10 REPLACEABLE STEEL TRACTION PINS PER SIDE – Give yourself a place to hang on with 10 traction pins that bite in and stick your shoes to the pedal. The generously sized platform offers stability, comfort and grip while the low-profile design gives added ground clearance..
  • 9/16 CNC MACHINED CR-MO AXLE – Durable Chromalloy axles make for solid long lasting pedals..
  • SEALED BEARINGS – Sealed bearings keep the elements out and contribute to long-lasting, smooth rolling pedals..
  • LIGHTWEIGHT – At just 205g each, these pedals weigh less than many higher priced competing models..
Check Stock

MOWOK CNC Motorcycle Swingarm Spools Slider Stand Screws Fit For Kawasaki Ninja 400 650 1000 ninja 1000SX ZX6R ZX10R Z650 Z900 Z1000 Z1000R

  • 【Precisely Applicable】 Fit For NINJA1000SX 2020-2022, Ninja 650 2017-2021, NINJA400 Z400 2018-2021, ZH2 2019-2021, ZX-6R ZX600 zx636 2014-2021,ZX-10R 2011-2019, Z1000 Z1000R Z1000SX ninja1000 2015-2021, Z900 Z650 2017-2022, Z800 2013-2016.
  • 【Basic Function】 Swingarm Spools can help the motorcycles to stand and avoid tipping over when you are repairing or parking your motorbikes, thus protect the Body and Parts of the motorbikes..
  • 【High-quality Material】 CNC Aluminum with stainless steel screw, strong and durable, not easy to fade, parts can be replaced..
  • 【Exquisite Design】Swingarm slider with Assembly design, easy to install, it is not only a practical tool for motorcycles, but also a beautiful decoration..
  • 【Service Guarantee】If you have any installation and product problems after receiving the Swing Arm Bobbins, you can contact us, we will handle the problem properly ..
Check Stock

Element Case Black Ops Elite Case for iPhone 11 Pro- Black (EMT-322-224EX-01)

  • Drop-shock body - exclusive impact absorbing three-layer design (Aluminum polycarbonate TPU) dissipates energy to withstand extreme impact.
  • Cnc machined aluminum - Side rails on the chassis are CNC machined from aircraft grade aluminum then bead blasted and “hard anodized” for a super tough Stealth finish.
  • G10 reinforced back plate - CNC machined military grade glass composite used to create a chassis that resists twisting and bending.
  • Tactical holster included - Conveniently carry your phone while protecting it from the elements Features heavy-duty 600D nylon construction and Velcro closure top.
  • Deep pocket clip attachment - PVD coated stainless steel with extended LENGTH for additional grip and deeper fit into pockets.
Check Stock

Motorcycle Accessories Aluminum Swing arm Spools Slider Stand Screw Fits For KAWASAKI Vulcan S 650 2015-2021 (Red)

  • ...hen parking or repairing. Our swing arm spool is equipped with black gasket, which is used to increase the stress area, so as to reduce the damage to the motorcycle body..
  • 【Description】Whether you're looking to protect your swingarm from an inevitable tip-over or you need to place your bike on a stand, these CNC machined spools/sliders/bobbins are your answer. All riders truly know it's not if you tip-over, but rather when you tip-over. With these bolted on you'll take comfort in knowing that you have protection in place to prevent unwanted dings and scratches from accidental driveway tip-over's or a slide-out at speed..
  • 【NOTE】 Before ordering, please make sure that the bolt hole size is measured correctly. It can only fit 0.39 inch thread. And comes with four washers,if the rear rocker slider can not be installed flush in the spool bracket, or not firmly placed in the spool bracket, please add a washer..
  • 【Quality Assurance】MOWOK attaches importance to the shopping experience and satisfaction of each customer, so we provide lifelong technical support and 6 months of damage replacement service. No matter what problems, please contact us first, we will try our best to solve any problems for you..
Check Stock

Motorcycle Accessories Aluminum Swing arm Spools Slider Stand Screw Fits For KAWASAKI Vulcan S 650 2015-2021 (Green)

  • ...hen parking or repairing. Our swing arm spool is equipped with black gasket, which is used to increase the stress area, so as to reduce the damage to the motorcycle body..
  • 【Description】Whether you're looking to protect your swingarm from an inevitable tip-over or you need to place your bike on a stand, these CNC machined spools/sliders/bobbins are your answer. All riders truly know it's not if you tip-over, but rather when you tip-over. With these bolted on you'll take comfort in knowing that you have protection in place to prevent unwanted dings and scratches from accidental driveway tip-over's or a slide-out at speed..
  • 【NOTE】 Before ordering, please make sure that the bolt hole size is measured correctly. It can only fit 0.39 inch thread. And comes with four washers,if the rear rocker slider can not be installed flush in the spool bracket, or not firmly placed in the spool bracket, please add a washer..
  • 【Quality Assurance】MOWOK attaches importance to the shopping experience and satisfaction of each customer, so we provide lifelong technical support and 6 months of damage replacement service. No matter what problems, please contact us first, we will try our best to solve any problems for you..
Check Stock

BC Lightweight Aluminum Bike Pedals - Great for MTB, BMX, Downhill - Wide Flat Platform with Removable Grip Pins - 9/16" Cr-Mo Spindle - Red

  • CNC MACHINED 6061 ALUMINIUM BODY - Machined aluminium body for a lightweight, durable construction..
  • 113 X 105MM 9/16 CNC MACHINED CR-MO AXLE - Durable Chromalloy axles make for solid long lasting pedals. WITH10 REPLACEABLE STEEL TRACTION PINS PER SIDE - Give yourself a place to hang on with 10 traction pins that bite in and stick your shoes to the pedal. The generously sized platform offers stability, comfort and grip while the low-profile design gives added ground clearance..
  • 9/16 CNC MACHINED CR-MO AXLE - Durable Chromalloy axles make for solid long lasting pedals..
  • SEALED BEARINGS - Sealed bearings keep the elements out and contribute to long-lasting, smooth rolling pedals..
  • LIGHTWEIGHT - At just 205g each, these pedals weigh less than many higher priced competing models..
Check Stock

ATV Fuel tank Metal Gas Tank with Fuel Gas Cap For Chinese 50cc 70cc 90cc 110cc 125cc ATV Quad 4 Wheeler Colster TaoTao Buyang Coolsport Sunl Eagle JCL Peace

  • 【Features】CNC Machined Design，Real Billet Cap Made Of Aluminum ， Light Weight Performance Upgrade To OEM Caps.
  • 【 Material】CNC Billet T6-6061 Aluminum.
  • 【Fitment】 CR85R 2003-2007 CR125R 2000-2007 CRF150R 2007-2020 CRF230F 2004-2019 CR250R 2000-2007 XR100R/50R/80R/70R 2001-2003 BADGER 1987-2001 BIG WHEEL 1987- 1988 BREEZE 1989-2004 RT100 1990-2000 ttr125 2000-2005,2020-2022 ttr90 2000-2004 GRIZZLY 125 2004- 2010 GRIZZLY 80 2005-2008 RAPTOR 50 2005-2008 RAPTOR 80 2005-2008 TT-R125 2005-2009 TT-R230 2005-2009 TT-R90 2005-2007 RAPTOR 700 2006-2021.
  • 【Notice】 Make sure you can find your bike model and year in application please.
Check Stock

Fstop Labs Replacement for DJI Phantom 3 Gimbal Yaw Arm in CNC Aluminum for Professional / Advanced / Standard

  • Compatible with Phantom 3 Professional, Advanced, Standard.
  • For repairing broken DJI Phantom 3 Yaw Arms.
  • Anodized Silver to match original parts, includes Set Screw + Hex WrenchDescriptionIntroducing our Aluminum direct replacement gimbal parts for the DJI Phantom 3 Professional, Advanced, and Standard. These are CNC-machined out of a solid block of 6061 aircraft-grade aluminum. Guaranteed OEM fitment and function..
  • CNC-machined from solid 6061 aircraft-grade aluminum Guaranteed.
  • Painted silver to match original DJI parts.
  • Yaw Arm + Roll Arm + Roll Arm Cover + Alignment Tool.
  • Tweezers (helps to manipulate ribbon cables and screws).
Check Stock

Mishimoto MMSK-BMXBKWH Grip Shift Knob, White/Black

  • Bold design and ergonomic grip ensure your car looks and feels flawless.
  • CNC-machined thermoplastic handle for added protection against extreme hot and cold surface temperatures.
  • CNC-machined and anodized billet 6061 aluminum accents.
  • 16.8 oz total weight for precise and accurate shift feel.
Check Stock

UTV INC Polaris RZR 170 2\ Billet Aluminum Wheel Spacers

  • USA CNC Machined + High Performance Aerospace Grade Aluminum.
  • Wheel Bolt Pattern: 4x156. Vehicle Bolt Pattern: 4x156.
  • Thickness: 2" per spacer. Color: CNC Machined Polished Aluminum Finish.
  • Please confirm compatibility with your vehicle before purchasing.
Check Stock