Best Cnc Marking Machine

iGaging Layout Square Set of Two 7\ & 12\ w/Center Finder Bevel Gauge

  • Set of 2 squares 7" & 12" 3 in 1 tool Layout Square - Angle Gauge - Center Finder.
  • Precision CNC Solid Single-Frame construction blade & base for guaranteed 90 degree square.
  • Laser engraved over anodized aluminum for precision and permanent markings.
  • Marking holes for every 16th of an inch for precise marking.
  • Magnetic Base. Includes mechanical pencil 0.7mm to fit the holes..
Check Stock

Router Template/CNC Double Sided MOUNTING Masking Tape 1" X 36YDS

  • LLPT CNC woodworking tape has optimal thickness and width after colleting feedbacks from hundreds of professional woodworker.
  • tough balancing, minimized bonding gap, firmly holding and easy releasing. Its intended purpose is to fasten templates/jig to wood, plastic, aluminum and steel for marking and cutting..
  • EASY USE AND REMOVAL: The yellow paper backing is easy to peel off by finger nail, the application will be done easily and nicely. LLPT tape would not leave any headache behind or damage surfaces for neat DIY woodworking projects upon your removal. The silicone adhesive is coated, LLPT would not suggest leaving the tape on templates for more than 72 hours which might cause very high bonding and leave gummy white upon removal..
  • LLPT-TAPES: LLPT produces various tapes for industrial & commercial use with ideal sizes & thickness based on the desires of users. LLPT is dedicated to provide high utility on the product with competitive price with well protected package. Search on Amazon for other LLPT tapes like Hook Loop Tape, Magnetic Strips, Craft Tape, Foil Tape, Foam Tape, Acrylic Mounting Tape, Duct Tape, Silicone Tape, Caulki....
Check Stock

500W CNC Router Machine, MYSWEETY 3 Axis 4540 CNC Metal Engraving Milling Machine for Carving Cutting Wood Acrylic MDF PCB Plastic, Working Area: 430*390*90mm(16.9*15.4*3.5inch)

  • 【500W Spindle & High Speed】 The upgraded 3-axis 4540 engraving machine is equipped with an 500W spindle for more power and higher efficiency, making it possible to cut stainless steel, aluminum and other metals. The maximum movement speed can reach 5000mm/min, the spindle speed range is 0-11000rpm/min.
  • 【Larger Working Area】 The cnc router machine has a larger engraving area, increased to 430*390*90 mm(16.9*15.4*3.5inch). The working table has precise scale lines, which is convenient for you to locate and measure the engraving material size.
  • 【Wide Application & Compatibility】 The CNC wood machine is compatible with GRBL software and supports systems such as Windows XP/7/8/10 and Mac OS. Suitable for engraving and carving stainless steel, wood, aluminum, brass, plexiglass, leather, PCB, MDF, acrylic, resin, nylon, carbon fiber, PCB, PVC, etc.
  • 【Easy to Assemble】 This CNC wood carving machine could be assembled in 15-30 minutes. The main components are already pre-assembled. Wires are clearly labeled for quick connection. The control board, power supply, emergency stop, and wires are integrated into a newly designed box for easy and safe operation. You just need several installation steps and wiring to start carving your projects.
Check Stock

YOUNGL Woodworking Scribe TS 3 Center Finder T Type Ruler Gauge Crossed-Out Tool Aluminum Alloy Measuring for Carpenters Portable Durable Manual t Marking Hole Scribing(TS-8Red)

  • 【Precise Marking T Rule】 Precise marking t-rule helps you draws perfect horizontal lines while sliding the rule along the edge of your work, Accurate calibration and convenient operation.
  • 【Convenient to Use】T Type Shape: T type design, easy to operate and portable to use. The marking ruler is precise, versatile, and easy-to-use. Find the hole corresponding to the scale, insert the pen into the hole, and draw the desired line.
  • 【Function】follows the edge of your work piece to mark perfectly placed horizontal or vertical lines, micro-fine marking holes and slots place your mark exactly on target, makes the woodworking ruler a perfect tool for you..
  • 【Material & Anodic Oxidation】Made of aluminum alloy 6067 material, is wear-resistant, rust-proof, durable and hard to break. Surface anodic oxidation CNC tool processing.
  • 【Compact Size】the ruler size is 107x88x58x20 mm,mini line ruler easy to carry and easy to use. Suitable for home DIY, woodworking measuring tool, etc...
Check Stock

MISSYOUNG Double Sided Woodworking Tape 1 Inch x 82 Feet Two-Sided Woodworker Tape for Woodworking, CNC Work,Crafting, Wood Template Routing, Removable & Residue Free

  • ... APPLICABLE MATERIALS: Suitable to be used on wood, aluminum, steel, Peek, PMMA/plastic (not fiberboard), concrete, tile, marble and so on. This tape is thin but strong adhesive. Its intended purpose SPECIALLY is to fasten templates/jig to wood, plastic, aluminum and steel for marking and cutting. It needs to hold the template firmly, but still allow its release due to removable performance..
  • SIZE: 25mm Width, 82 Feet Length. Optimal thickness enables the double sided wood template tape to be applied and peeled off easily from the wood. Does not lift or chip off the wood’s surface, making it a perfect companion for woodworkers..
Check Stock

LLPT Double Sided Woodworking Tape 2 Pack 1.8 Inch x 36 Yards Each Roll Double Face Turner Tape for CNC and Wood Template Removable Residue Free (WT266)

  • LLPT CNC woodworking tape has optimal thickness and width after colleting feedbacks from hundreds of professional woodworker.
  • tough balancing, minimized bonding gap, firmly holding and easy releasing. Its intended purpose is to fasten templates/jig to wood, plastic, aluminum and steel for marking and cutting..
  • EASY USE AND REMOVAL: The yellow paper backing is easy to peel off by finger nail, the application will be done easily and nicely. LLPT tape would not leave any headache behind or damage surfaces for neat DIY woodworking projects upon your removal. The silicone adhesive is coated, LLPT would not suggest leaving the tape on templates for more than 72 hours which might cause very high bonding and leave gummy white upon removal..
  • LLPT-TAPES: LLPT produces various tapes for industrial & commercial use with ideal sizes & thickness based on the desires of users. LLPT is dedicated to provide high utility on the product with competitive price with well protected package. Search on Amazon for other LLPT tapes like Hook Loop Tape, Magnetic Strips, Craft Tape, Foil Tape, Foam Tape, Acrylic Mounting Tape, Duct Tape, Silicone Tape, Caulking Tape, Gaffer Tape, Butyl Tape and so on..
Check Stock

Face Mill Shoulder Cutter BAP400R-50-22-4T 90 Degree Square Shoulder Indexable CNC 4 Flutes Face Mill Shoulder Milling Cutter with Wrench and Box

  • GREAT TOOL FOR CNC MILLING MACHINE--This BAP400R-50-22-4T Square Shoulder Face Mill Cutter is designed for CNC milling machine.
  • HIGH GRADE ALLOY STEEL MATERIAL--This Square Shoulder Indexable Face Milling Cutter is made of high quality alloy steel, which is featured with high hardness and good durability to ensure a long term service.
  • GREAT REPLACEMENT TOOL FOR YOU--This Face Shoulder Milling Cutter is regarded as an essential mill parts for milling machine, and it is very convenient to use it to replace the broken one or the old one.
  • USEFUL BOX FOR CONVENIENT STORAGE AND PROTECTION--There comes with a plastic box for easy storage and carriage, and it can provide good protection for the tool as well.
Check Stock

LLPT Double Sided Woodworking Tape 2 Pack 1/2 Inch x 36 Yards Each Roll Double Face Turner Tape for CNC and Wood Template Routing Edge Banding Removable Strong Adhesive (WT065)

  • LLPT CNC woodworking tape has optimal thickness and width after colleting feedbacks from hundreds of professional woodworker.
  • tough balancing, minimized bonding gap, firmly holding and easy releasing. Its intended purpose is to fasten templates/jig to wood, plastic, aluminum and steel for marking and cutting..
  • EASY USE AND REMOVAL: The yellow paper backing is easy to peel off by finger nail, the application will be done easily and nicely. LLPT tape would not leave any headache behind or damage surfaces for neat DIY woodworking projects upon your removal. The silicone adhesive is coated, LLPT would not suggest leaving the tape on templates for more than 72 hours which might cause very high bonding and leave gummy white upon removal..
  • LLPT-TAPES: LLPT produces various tapes for industrial & commercial use with ideal sizes & thickness based on the desires of users. LLPT is dedicated to provide high utility on the product with competitive price & great packing protection during transition. Search LLPT-TAPES on Amazon for other tapes like Butyl Tape, Dry Erase Tape, Mounting Tape, Hook Loop Tape, Carpet Tape, Woodworking Tape, Nano Tape, Silicon Seal Tape and so on..
Check Stock

Comgrow 2 in 1 ROBO CNC 3018 5000MW Laser Engraving Module Compressed Spot,GRBL Control 3 Axis CNC Router Machine Kit with Offline Controller,End Mill Bits,for Wood Glass Mirror Stainless Steel

  • 【PRE-ASSEMBLED】Comgrow ROBO CNC 5W Laser Engraving for wood stainless steel stone glass ceramics is very easy to assemble and use. JUST DO THE UNBOXING AND LOCK 6 SCREWS when receive it, then, step on your creating journey..
  • 【ULTRA-FINE COMPRESSION LASER】The laser power for this CNC laser and router machine is 5W, the high-power engraving speed is faster, and the accuracy is higher. The ultra-fine laser focus area is reduced to 0.08mm^2. The high-density laser can easily cut 4mm thick wood and black. Acrylic.
  • can directly engrave smooth stainless steel metal and ceramics..
  • 【AUTOMATIC TOOL-SETTING】Comgrow ROBO CNC router pre assembled machine can calibrate the zero of the Z axis autonomously, with the functioning of embedded sensors.
  • 【OFFLINE CONTROLLER】The Comgrow ROBO CNC router Laser machine can work without pc. ROBO supports operating without PC, THE CNC ROUTER IS EQUIPPED WITH A OFFLINE MODULE. Just transfer files to a SD card, you may begin creating and no PC needed..
  • 【COMPREHENSIVE AFTER-SALE SERVICE】 Comgrow ROBO CNC Engraving machine for metal stone wood glass Stainless Steel offer exhaustive after-sale service, you can search "Comgrow" through Facebook, Youtube, Twitter, Instagram and google and will easily find out our Comgr....
Check Stock

Comgrow ROBO Table CNC Router Machine with GRBL Offline Control,3-Axis Engraving Milling Machine 300x180x45mm Working Area for Carving Cutting Plastic Acrylic PCB PVC Wood Aluminum brass

  • 【Upgrade Comgrow CNC ROBO 】Comgrow cnc router 3 Axis 42 stepper motor are X/Y/Z Axis power, the axis moves more smoothly. 775 spindle motor up to 10000r/min. and comes with short circuit protection, no need to worry about module damage..
  • 【CUSTOMISED SETTINGS】Metal CNC machine cutter Full Aluminum Alloy tray Working area: 30x18x4.5CM. Meets most of the engraving needs.
  • 【AUTOMATIC TOOL-SETTING】CNC Router for metal aluminum copper can calibrate the zero of the Z axis autonomously, with the functioning of embedded sensors During the engraving process, there is no need to manually adjust the height of the Z axis to make the drill touch the surface of the engraved object.
  • 【 a wide range of projects and materials】the comgrow cnc router machine Capable of cutting and engraving all types of plastics, soft aluminum, Copper, woods, acrylics, PVCs, PCBs and MDF, the setting parameters of different materials can refer to the product page below middle"".
  • 【more Simply Assemble and Use】This table cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and SD Card of all the files. Please let us know if you need any help ..
Check Stock

US Stock 50W JPT Fiber Laser Engraver Machine Fiber Laser Marking Machine Engraving Machine 175×175mm Lens with Rotary Axis Compitable with Lightburn

  • 50W Fiber Laser Marking Machine Equipped JPT Laser Source and Dia.80mm Rotating Head.Laser Power: 50W. Marking Area: 175*175mm Engraving Depth:≤1mm(0.024in).
  • Pulse Duration: 200ns. Control board : BJ JCZ board(Original).EZCAD2.Compatible with Lightburn,Windows XP/Vista/7/8/10.Stable performance and high reliability..
  • Applicable material: Fiber laser marking machine can work on all metals such as aluminum,stainless steel, brass, copper etc. and some of nonmetal such as nylon ,light button, ABS , PVC ,PES etc..
  • Imported laser scanning system makes the marking speed up to 7m/s.
  • High-Rate of Electrical-Optical Conversion: up to 70%..
  • Free Shipping.ETA:5 days.No Import Duty.2 year warranty.Remote assistance,Customer and Technical Support.English User Manual and Demo Video offered by USB flash disk along with the machine.Returnable for Non-human-induced Malfunction Machine..
Check Stock

500W CNC Router Machine, MYSWEETY 3020 PLUS CNC Wood Router 3 Axis Desktop CNC Machine for Metal Wood Acrylic MDF with Limit Switches, Emergency-Stop, Working Area 300*200*73 mm(11.81*7.87*2.87 inch)

  • 【High Power Spindle & All-metal Body】: This 3020 PLUS CNC machine is solidly built with all-metal body structure and upgraded 500W 52mm spindle with E11 collet, more powerful and higher efficiency, making it possible to cut stainless steel, aluminum and other metals.
  • 【High Precision & Stability】: Without any plastic parts. The CNC router is equipped with solid dual steel linear guide rails which are 12mm thick and also come with bearing slides. All-metal X-Z axis part, up to 73mm of vertical travel, more powerful stepper motor, all of these are designed to ensure the movement of the 3-axis faster and more stable, resulting in improved engraving accuracy.
  • 【Larger Working Area】: The working area of the 3020-PLUS router vs the 3018-PRO is larger, increased to 300*200*73mm(11.81*7.87*2.87inch). Our working table with a particular appearance has precise scale lines and a flat working surface, convenient for you to locate and measure the engraving material size. And the high quality emergency stop and 6 limit switches for all-around protection making it more safe to use.
  • 【Wide Compatibility & Easy to Assembly】: The CNC carving machine is compatible with GRBL software and supports Windows XP/7/8/10, Linux and Mac OS (a bit more complicated to o....
Check Stock

BOSCH PR001 Fixed Base for the BOSCH Colt PR20EVSK & PR20EVSNK Palm Routers , Blue

  • 3 WINGS WOOD CNC ROUTER BIT: Shank: 1/4”.
  • HIGH QUALITY CNC SURFACING ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time..
  • VERSATILE ROUTING TOOl: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
  • USE RANGE for CNC ROUTING BITS: Suitable for solid woods, MDF, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..
Check Stock