Categories

Best Cnc Plate Cutting

EAG Full Width Front Bumper with LED Lights and Light Frames Fit for 76-86 Wrangler CJ

  • LED LIGHT AND LIGHT SURROUNDS - Two 12W LED lights included.EAG patent metallic gray ABS light surrounds included. Direct bolt-on design for secure rattle free installation..
  • WINCH PLATE & D-RING SHACKLES - Built-in winch plate for up to 12,000 lbs. winches. High strength D-ring mounts are welded on. NOTE: D-ring shackles are NOT included..
  • CONSTRUCTION - Use of laser-cutting, CNC folding and robotic assembly welder. Manufactured from durable 5/32" steel sheet and 2" x .120 wall steel tubing. Textured black powder coat finish..
  • EASY INSTALLATION - EAG front bumper is engineered to be a direct bolt-on upgrade replacement for your wrangler original stock bumper reusing the factory mounting points. No cutting or modifications required..
Check Stock

EAG Stinger Stubby Front Bumper with Winch Plate Fit for 1984-2001 Cherokee XJ/Comanche MJ

  • FITMENT - Compatible with 1984-2001 Cherokee XJ / 1984-2001 Comanche MJ.
  • STINGER BAR - This rock crawler bumper's benefit is the bolt-on stinger bar, which will help to prevent your Cherokee from flipping forward when coming down off an obstacle during hardcore off-roading. And it provides excellent protection for the grilles..
  • CONSTRUCTION - Use of laser-cutting, CNC folding, and robotic assembly welder. Manufactured from durable 5/32" steel sheet and 2" x .120 wall steel tubing. Textured black powder coat finish..
  • WINCH PLATE & D-RING SHACKLES - Built-in winch plate for up to 12,000 lbs. winches. High strength D-ring mounts are welded on. Two 4.75 ton D-ring shackles and black isolators included..
  • SIMPLE BOLT-ON INSTALLATION - EAG engineered this Cherokee stinger bumper to be a direct bolt-on replacement, no drilling or cutting required..
Check Stock

SainSmart Genmitsu Nano Blue Coat End Mill CNC Router Bits Luxury Kit 8 Boxes 80 Bits

  • ➤Cost-Effective: This luxury kit includes 8 boxes total of 80 CNC router bits. All kinds of bits meet your different CNC projects' needs..
  • ➤Nano Blue Coat: All bits are coated by Nano Blue. This is a new craft at the market. With this new technology, it provides higher hardness and....
  • ➤Improve Efficiency: Made of hard steel and featured with high hardness, strength, and wear resistance. This makes your job easier and improves work....
  • ➤Application: It is mainly used for acrylics, plastics, carbon fiber, chipboard, MDF, PCB, solid surface, wood..
  • ➤Advantage: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches..
Check Stock

Face End Mill, MT3-FMB22 Holder Extension 400R-50-22 Face End Mill Cutter 10pcs APMT1604 CNC Carbide Inserts

  • It is the ideal tool for heavy CNC milling cutting..
  • Used for plate cutting, harden insert used for steel material..
  • Surface more smooth, feel comfortable, appearance nice..
Check Stock

Tidal Stinger Front Bumper with Winch Plate Fit for 84-01 Cherokee XJ/Comanche MJ

  • STINGER BAR - This rock crawler bumper's benefit is the bolt on stinger bar, which will help to prevent your Cherokee from flipping forward when....
  • POWERFUL LED LIGHTS INCLUDED - Two 12W LED lights included..
  • WINCH PLATE & D-RING SHACKLES - Built-in winch plate for up to 12,000 lbs. winches. High strength D-ring mounts are welded on. Two 4.75 ton D-ring....
  • CONSTRUCTION - Use of laser-cutting, CNC folding and robotic assembly welder. Manufactured from durable 5/32" steel sheet and 2" x .120 wall steel....
Check Stock

Eurobuy Heavy CNC Milling Cutting Kit, MT3-FMB22 Holder Extension +400R-50-22 Face End Mill Cutter +10pcs APMT1604 CNC Carbide Inserts

  • Used for plate cutting, harden insert used for steel material..
  • Surface more smooth, feel comfortable, appearance nice..
  • It is the ideal tool for heavy CNC milling cutting..
Check Stock

EAG Assembled Front Bumper with LED lights Compatible with 1999-2004 Grand Cherokee WJ

  • FITMENT - Fit for 1999-2004 Grand Cherokee WJ..
  • WINCH PLATE & D-RING SHACKLES - Built-in winch plate for up to 12,000lbs. winches. High strength D-ring mounts are welded on both inside and outside. Two 4.75 ton D-ring shackles and black isolator included..
  • LED LIGHTS - Two 12W LED Lights, integrated LED models and wiring harness included..
  • CONSTRUCTION - Use of laser-cutting, CNC folding and robotic assembly welder. Manufactured from durable 5/32" steel sheet. Textured black powder coat finish..
  • EASY INSTALLATION - EAG modular front bumper is engineered to be a direct bolt-on upgrade replacement for your vehicle original stock bumper reusing the factory mounting points..
Check Stock

CNC Spoilboard Surfacing Router Bits, SIMILKY 1/2 inch Shank 2 inch Cutting Diameter, Slab Flattening Router Bit Planing Bit Wood Milling Cutter Planer Woodworking Tool

  • [4 WINGS WOOD CNC ROUTER BIT 1/2 SHANK] Precise 4 Wings can cut your project material quickly and cleanly.1/2 Inch Shank CNC Spoilboard Surfacing Router Bit, 1/2" Cutting height, 1/2" Cutting depth,2"(50.8mm) Cutting Diameter..
  • [HIGH-QUALITY CNC ROUTER BIT] The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
  • [WIDE RANGE OF APPLICATIONS] This professional bottom router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving.Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand)..
  • [APPLICABLE EQUIPMENT] Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. wood engraving machines, trimming machines, etc..
  • [APPLICABLE EQUIPMENT] Use on CNC and other automatic routers as well a....
Check Stock

GK64 GK64x Keyboard kit CNC Wood Wooden Case Wired PCB Plate Stabilizers Walnut Wired PCB

  • Package Included: CNC Case + Feet + Screws + GK64x PCB + Plate + Plate stabilizers.
  • CNC Wood Case and the stabilizers is Genuine plate mounted stabilizers.
  • Built-in microphone under spacebar, support External sound source play.
  • The plate is FR4 plate which more soft and silent.You need to attach plate with PCB by switches.Install 4-5 switches to plate then to PCB socket at....
Check Stock

BIQU 400mm 8mm T8 Lead Screw Set Lead Screw+ Copper Nut + Coupler + Pillow Bearing Block for 3D Printer

  • ✅【Simple Introduction:】4080U Aluminum Profile Worktable T8 Screw Linear Slide Table with Flexible coupling D20 L25 8mm to 6.35mm, Lead is 8mm ( The lead screw moves 8mm in one turn), Color is balck, Provide length: 200mm/250mm/300mm/350mm/400mm/450mm/500mm..
  • ✅【4080U Type 400mm Size:】Overall length: 449mm, Length of aluminum section: 400mm, Effective stroke: 400mm-77.15mm=322.85mm, T-type screw length: 440mm. ⚠️ (Please allow slight errors on size due to manual measurement.).
  • ✅【Wide Range of Uses:】CNC sliding table is mainly used for equipment such as cutting machine, DIY CNC router, lasser machine, lasser printer, 3D printer, small CNC machine tools and other equipment..
  • ✅【Good Performance:】This 3D printer accessories have stable performance and high work efficiency. They are an indispensable part of linear motion..
  • ✅【Product Description:】This table linear actuator kit is made of high quality metal, combined with the unique linear rail and the end mounts and gantry plate, plus other v-slot components, which is an essential part of linear motion. It is a simple linear actuator but with fine workmanship, stable performance and high work efficiency..
Check Stock

End Mill Sets 10 Pieces Titanium Coat Carbide CNC Router Burrs End Milling Engraving Bits Drilling Hole Tool for PCB Circuit Board Plastic Fiber Wood Copper 0.8~3.175mm 1/8 Shank

  • Cutting edge diameter (CED): 0.8-3.175mm (10Pcs, 0.8mm, 1mm, 1.2mm, 1.5mm, 1.6mm, 1.8mm, 2mm, 2.4mm, 3mm, 3.175mm).
  • Wide Compatibility: Works with PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts....
  • Titanium Coat Carbide Hard Steel: With sufficient flexural strength and wear resistance, ensuring high work efficiency..
  • High Quality Material: Using high quality grained carbide material, providing good milling and cutting performance..
  • Highly precision: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches..
Check Stock

EAG Front Bumper with LED Lights and Winch Plate Fit 84-01 Cherokee XJ / 84-01 Comanche MJ.

  • FITMENT - Compatible with 1984-2001 Cherokee XJ / 1984-2001 Comanche MJ..
  • INTERCHANGEABLE LIGHT SURROUNDS - EAG patent pending metallic gray ABS light surrounds included. Only 96 and earlier require factory fender trimming..
  • PRE-RUNNER HOOP - Integrated pre-runner hoop provides real protection for your XJ. Two tabs on grille guard for mounting extra lights. Two 12W LED lights included..
  • WINCH PLATE & D-RING SHACKLES - Built-in winch plate for up to 12,000 lbs. winches. High strength D-ring mounts are welded on. Two 4.75 ton D-ring shackles and black isolators included..
  • CONSTRUCTION - Use of laser-cutting, CNC folding and robotic assembly welder. Manufactured from durable 5/32" steel sheet and 2" x .120 wall steel tubing. Textured black powder coat finish..
Check Stock

Motorcycle Gear Lever Left Gear Shift Lever For Kawasaki Ninja250R 2008-2014 Ninja300 2013-2017 Z250 2013-2014 Z300

  • Fitment:Kawasaki EX250R Ninja 2008-2012 / Kawasaki Ninja250R 2008-2014 / Kawasaki Ninja300 2013-2017 / Kawasaki Z250 2013-2014 / Kawasaki Z300 2015-2017.
  • *Feature: CNC bending / Laser cutting / welding.
  • *It can directly replace the OEM shift lever.
Check Stock