SpeTool Tapered Ball Nose Spiral Router Bit 1.0mm Tip Diameter (0.5mm Radius) 4.82 Deg for CNC Milling Engraver Carving Bits
- Solid carbide spiral ball nose tapered router bit.
- 2 flute, 1/4" shank, 1-1/4" cutting length, 0.5mm tip diameter, 4.82Deg, TiAlN coating, 55HRC.
- Mostly used for 2D/3D engraving work, detail carving.
- The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
- This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check StockSpeTool Carbide Ball Nose Router Bit 2.0mm Diamter Tip (1.0mm Radius) Woodwork Metal CNC Engrave Carving Machine Tools 1/4 Shank TiAlN Coat
- Solid carbide spiral ball nose tapered router bit.
- 2 flute, 1/4" shank, 1-1/4" cutting length, 2.0mm tip diameter, 3.92Deg, TiAlN coating, 55HRC.
- Mostly used for 2D/3D engraving work, detail carving.
- The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
- This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check StockYonico Straight Router Bits Set 5 Bit 1/2-Inch Shank 14522
- Route dados and straight cuts for joinery and general use.
- Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge.
- For use on CNC, table mount and handheld routers.
- Silver induction brazing for maximum strength and durability.
Check StockSpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length
- Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
- Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
- For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
- The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check StockSpeTool Tungsten Carbide Tapered End Mill 1/4\ Shank 3\ OVL with 4.0mm Tips Diameter (2.0mm Radius) 2.2Deg for Woodworking Carving CNC Router Bits
- Solid carbide spiral ball nose tapered router bit.
- 2 flute, 1/4" shank, 1-1/4" cutting length, 4.0mm tip diameter, 2.2Deg, TiAIN coating, 55HRC.
- Mostly used for 2D/3D engraving work, detail carving.
- The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
- This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check StockSpeTool 5PCS 12401 4 Flutes Carbide CNC End Mill, Square Nose 1/4 inch Shank, 2-1/2 inch Long Overall, Titian Coated for Metal Mill
- Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
- The End Mill With Flat Top, 4-Flute, For Finishing, Material: HRC55 Carbide with TiAlN Coated.
- For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
- The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check StockSpeTool Spiral Router Bits with UpCut 4 inch Extra Long1/4 inch Cutting Diameter 2 inch Cutting Length CNC Router Bit Carving Tool
- Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 2 inch cutting length, 4 inch for total length.
- The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
- Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
- The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
- Industrial quality control to ensure best performance.
Check StockSpeTool Spiral Router Bits with DownCut 1/8 inch Cutting Diameter, 1/4 inch Shank CNC Bits Solid Carbide End Mill for Wood Cut, Carving
- Solid Carbide spiral Downcut router bit with 1/4inch shank and 1/4inch cutting diameter, 1/2 inch cutting length, 2 inch for total length.
- The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
- Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
- The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
- Industrial quality control to ensure best performance.
Check StockSpeTool Spiral Downdcut Router Bits with 1/2 inch Shank, 1/2 inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut
- Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
- The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
- Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
- The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
- Industrial quality control to ensure best performance.
Check StockSpeTool Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver
- Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
- The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
- Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
- The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
- Industrial quality control to ensure best performance.
Check StockSpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter, 1/2 Inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut, Carving
- Solid Carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length.
- The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
- Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
- The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
- Industrial quality control to ensure best performance.
Check StockKodiak Cutting Tools KCT133263 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/8\ Shank, 1/2\ Length of Cut, 1-1/2\ Overall Length, 1/8\ Diameter
- Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
- Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
- For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
- The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet.
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check StockSpeTool Spiral Downdcut Router Bits Extra Long (4 inch) with 1/2 Inch Shank, 1/2 Inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut
- Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length.
- The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
- Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
- The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
- Industrial quality control to ensure best performance.
Check Stock