Categories

Best Cnc Shield Expansion Boards

Eiechip® CNC 3D Printer Kit for Arduino Mega 2560 R3 + RAMPS 1.4 Controller + LCD 2004 + 6X Limit Switch Endstop + 5 A4988 Stepper Driver 3D Printer Interface & Driver Modules

  • 3D Printer Accessories Set meets most needs. Including CNC Shield V3.0, UNO R3 Board, A4988 StepStick Stepper Motor Module..
  • The 3D printer stepper motor shield V3 can be used as driver expansion board for engraving machines and 3D printers..
  • It has in total 4 channel slots for A4988 stepper motor driver modules for driving 4 channel of stepper motors..
  • Each channel of stepper motor only needs 2 IO ports, which means 8 IO ports is sufficient to manage 3 stepper motors..
  • This shield can make quick work for managing stepper motors in your project..
Check Stock

3D Printer Controller DIY Kit, RAMPS 1.4 + 2560 R3 Board + 5pcs A4988 Stepper Motor Driver & Heatsink for Arduino RepRap

  • Suitable for Reprap, memory card add on available..
  • Indicator light indicates when the heater output is turned on, safer and extensible to control other accessories..
  • The for Pololu board is in the pin socket and can be easily replaced or removed for future design use..
  • The modular design includes plug in stepper drivers and extruder control electronics on an for Mega shield for easy service, part replacement, upgrade?ability and expansion..
  • A number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack..
Check Stock

RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board Support 3D Printer Controller Shield Board Module for Ramps 1.4 Reprap Prusa Mendel

  • Fully assembled & tested, no soldering required, Can be extended to control other accessories..
  • It has Cartesian robots and requirements of the extruder, Heated bed control with additional 11A fuse. Fits up to 5 stepper driver board..
  • Three field effect transistors, three heater / fan output ports, three thermistor circuits.A number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack..
  • The fifth stepper motor output port can be customized as a Z-axis motor or a second extruder.Pololu board foot socket, can be easily replaced or removed..
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion..
Check Stock

Pokemon TCG 10 Card Booster Pack Sword Shield 06 Chilling Reign

  • The Pokémon TCG: Sword & Shield—Evolving Skies Booster Display Box contains 36 booster packs from the Sword & Shield—Evolving Skies expansion..
  • The Sword & Shield—Evolving Skies expansion features over 200 cards to collect and the Dragon-type Pokémon return with a new look..
  • There are 18 powerful Pokémon V and 15 enormous Pokémon VMAX.
  • The expansion also features 24 Trainer cards and a new Special Energy card.
  • More new Single Strike and Rapid Strike cards..
Check Stock

RAMPS 1.4 Controller + MEGA2560 R3 Board + 5pcs Soldered A4988 Stepper Motor Drivers + 5pcs Heat Sinks + 19pcs Jumpers with USB Cable for RepRap 3D Printer Kit

  • SAVING SPACE: The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package. So it can save space and cost..
  • SCALABLE: RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion. A number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack..
  • EASY TO USE: Using the bootloader, you can download the program directly via USB without using other external writers. Development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works..
  • MODULAR DESIGN: The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion..
  • POWER SUPPLY AND DRIVER: Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil..
Check Stock

Saiper Flexible Couplings 5mm to 8mm (5pcs) Aluminum Alloy Joint Connector Compatible with NEMA 17 Stepper Motors, RepRap 3D Printer or CNC Machine, 3D Printer Accessories

  • Fully assembled & tested, no soldering required, Can be extended to control other accessories..
  • It has Cartesian robots and requirements of the extruder, Heated bed control with additional 11A fuse. Fits up to 5 stepper driver board..
  • Three field effect transistors, three heater / fan output ports, three thermistor circuits.A number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack..
  • The fifth stepper motor output port can be customized as a Z-axis motor or a second extruder.Pololu board foot socket, can be easily replaced or removed..
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion..
Check Stock

Hard-to-Find Fastener 014973269470 Lag Expansion Shields, 1/4 Short, Piece-12

  • Expansion shield anchors for use with lag screws are designed to anchor into concrete, brick, and block..
  • Expansion shield anchors consist of pre-assembled two-part expansion shields..
  • These anchors expand as a lag screw is fastened through the anchor..
  • These anchors feature very precise tapered internal threading to permit easy turning of the lag screw..
  • Zinc plating adds a layer of corrosion resistance to the anchors..
Check Stock

AKLLA A4 Pro SFF Small Mini-ITX Case , 2-3 Slot GPU, with 3.0 PCI Riser Cable … (Snow White, A4 Pro)

  • It is not only suitable for home office and entertainment, but also suitable for DIY electronic games, we media, designers, editors, 3D rendering, programmers and workstation users..
  • Optional accessories: Aluminum inlaid acrylic side lens, support 120 / 140 / 240 / 280 water cooling expansion, support PEIC 4.0 GPU graphics card extension cable, and 3.5 hard disk expansion holder..
Check Stock

Pokémon TCG: Sword & Shield Silver Tempest Booster Display Box

  • The Pokémon TCG: Sword & Shield—Silver Tempest Booster Display Box contains 36 booster packs from the Sword & Shield --Silver Tempest Expansion..
  • Within the Sword & Shield --Silver Tempest expansion you can try and find the 3 brand-new Radiant Pokémon, 6 awesome Pokémon VSTAR, 15 powerful Pokémon V and 1 enormous Pokémon VMAX, and 30 cards with special art in the Trainer Gallery subset..
  • This is a great option to try and collect them all..
Check Stock

Pokémon TCG: Sword & Shield—Lost Origin Booster Display Box

  • The Pokémon TCG: Sword & Shield—Lost Origin Booster Display Box contains 36 booster packs from the Sword & Shield --Lost Origin Expansion..
  • Within the Sword & Shield --Lost Origin expansion you can try and find the 3 brand-new Radiant Pokémon, 6 awesome Pokémon VSTAR, 14 powerful Pokémon V and 1 enormous Pokémon VMAX, and 30 cards with special art in the Trainer Gallery subset..
  • This is a great option to try and collect them all..
Check Stock

HiLetgo GPIO Expansion Board Raspberry Pi Shield for Raspberry PI 4B/3B+ With Screws

  • Raspberry Pi 4B/3B+ GPIO Shield Expansion Board.
  • Multifunction GPIO Extension Board 1 to 3 Port DIY.
Check Stock

Pokémon TCG: Sword & Shield Lost Origin Mini Portfolio & 1 Booster Pack, Medium

  • Store Your Cards in Style with Pokémon Trading Card Game: Sword & Shield - Lost Origin Mini Portfolio..
  • Surpass the Point of No Return with Pokémon Trading Card Game: Sword & Shield - Lost Origin expansion!.
  • This miniature album will help you get organised and rocket you to victory in your next match!.
  • Store up to 60 of your greatest Pokémon cards!.
  • Each portfolio comes with a booster pack from Pokémon TCG: Sword & Shield – Lost Origin expansion, so you can start filling it up right away!.
Check Stock

3/8\-16 Double Expansion Shields - (Pack of 12)

  • 1/4" zinc plated double expansion shield anchors consist of two expansion cones and steel spring bands that wrap the halves together..
  • The band or shield is designed to expand during installation..
  • The anchor sits flush with the base material and is designed to accept a screw or bolt..
  • These anchors are for applications that deal in shear loads or where the bolts are subjected to pressure or vibration..
  • Screws and bolts can be removed or replaced after installation..
Check Stock