Categories

Best Cnc Single head Bending Machine

M5 25]-T Bolt Aluminum Connector-T Head Screw-T Bolt-for 2020 Series T-Slot Aluminum Profile (50PCS)

  • Thread Diameter: 8mm (M8), Bolt length 16mm..
  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • High quality T head screws for aluminium extrusions, suitable for 30mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

uxcell M5x12mm T-Slot Drop-in Stud Sliding Bolt Screw Carbon Steel for 20 Series Aluminum Profile 10pcs

  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • Thread Diameter: 6mm (M6), Bolt length 12mm..
  • High quality T head screws for aluminium extrusions, suitable for 30mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

uxcell M8x35mm T-Slot Drop-in Stud Sliding Bolt Screw Carbon Steel for 40 Series Aluminum Profile 10pcs

  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • Thread Diameter: 5mm (M5), Bolt length 20mm..
  • High quality T head screws for aluminium extrusions, suitable for 20mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

VFD 220V 0.75KW 1hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(0.75KW, 220V)

  • IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized)..
  • This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.Work with 220V single phase input and 220V three phase input.you can just connected L1/L2 to any two of VFD input R/S/T.
  • This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input.Can work well with the Mach 3 controller.
  • Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
  • If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one ..
Check Stock

Crescent H.K. Porter Rebar Cutter and Bender - 0590RBJN

  • Pure Copper Motor: A pure copper motor ensures higher reliability and excellent motivation yet low noise. Moreover, it is more durable with less power consumption and low noise to extend the service life..
  • Excellent Performance: This portable rebar bender bending rebar up to 5/8'' (#5) grade 60 from 0-130 degrees within 5 seconds. It satisfies your various bending demand and raises your working efficiency significantly..
  • Solid Machine Body: Study and durable machine body and head can stand super-hard rebar with strong clamping force, which can help to reduce the waste of steel rebar. Multiple screws fixed on the head enforce the security..
  • Detachable Positioning Bolt: The Rebar Bender with adjustable positioning bolt allows you to accurately bend any angle within 0-130 degrees, preset angle for repeating the same angle bend..
  • Humanized Design: This portable automatic rebar bender features an ergonomic back grip design with two handles that facilitate maneuverability, ease of use, and security. Simply Keeping the switch pressed, the bending block starts to push forward..
Check Stock

uxcell M6x25mm T-Slot Drop-in Stud Sliding Bolt Screw Carbon Steel for 30 Series Aluminum Profile 8pcs

  • Thread Diameter: 6mm (M6), Bolt length 25mm..
  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • Material: high quality nickel plated carbon steel.Antirust and long life. High quality T head screws for aluminium extrusions, suitable for 30mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

HONJIE 50Pcs M5x12mm Hammer Head Bolt T Screw Carbon Steel Nickel Plated for 2020 Series European Standard 6mm T-Slot Aluminum Profile

  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • Thread Diameter: 8mm (M8), Bolt length 25mm..
  • High quality T head screws for aluminium extrusions, suitable for 40mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

Yinpecly M8 x 20mm T Slot Bolts Fastener for European Standard 45 Series T-Slot Aluminum Profile Construction Industry, Carbon Steel Chrome Plated Silver Tone 20pcs

  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • Thread Diameter: 6mm (M6), Bolt length 25mm..
  • High quality T head screws for aluminium extrusions, suitable for 30mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

Leebein Electric Spin Scrubber, Cordless Cleaning Brush with 8 Replaceable Brush Heads, Adjustable Extension Handle, 2 Speeds & Remote Control,Power Cleaning Brush for Bathroom Floor Tile Car (Black)

  • ... polish and wax your car with those heads..
  • 【Length and Angle Adjustable】Leebein electric scrubber can be adjusted from 14.5-51.2in, 4 adjustable angles (90°, 120°,150, 180°). So you can use it to clean those hard-to-reach areas freely and easily without kneeling or bending over. No more back-breaking work and no single dirt left behind..
  • 【2 Ways to Control】Thanks to the extra remote controller on the long handle, you can now adjust the speed or turn the machine on/off without bending or kneeling. it’s a small change to save your knees and back. Besides, you can also control the machine with the controller on the short handle..
  • 【One Charge to Clean the Whole House】Adapted upgraded 2000mAh*2 battery and USB-C fast charge tech, Leebein electric bathtub scrubber fully charges in 2.5 hours which lasts 60-90 min, far enough to clean your entire house. You can check the remaining battery by the LED light on the machine..
Check Stock

MroMax M8-1.25x20mm T Slot Bolts Carbon Steel Drop-in Stud Sliding Screw Bolt Metric Hammer Head Bolt for European Standard 40 Series Aluminum Extrusions Silver 20Pcs

  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • Thread Diameter: 8mm (M8), Bolt length 35mm..
  • High quality T head screws for aluminium extrusions, suitable for 45mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

1.5\ 5/16-18 T-Bolt, 5 Pack

  • M6x20mm Hammer Head Bolt T Screw size: 15 x 10 x 6mm/0.59" x 0.39" x0.24"(LWT).
  • Metal Type：nickel plated , Carbon Steel.
  • 2020 Series European standard Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
  • T-shaped screws are used for aluminum profile design, suitable for standard 6mm T-slot 20 European standard aluminum profiles.
Check Stock

Heyiarbeit 10x11mm Plastic Cable Wire Carrier Drag Chain 1M R28 with End Connectors Open Type for Electrical Machines CNC Black 1Pcs

  • Size: 10mm x 11mm/0.39" X 0.43"(Inner H x Outer W).
  • 【CUSTOM LENGTH】- You can change the length you need by connecting multiple drag chains or splitting a single drag chain.
  • 【FEATURE】- The appearance of this cable carrier chain is beautiful,and surface gloss.
  • Reinforced nylon, reduces the noise of the cable chain while moving, while increasing wear resistance.
  • Our drag chain is resistant to low temperature, wear and corrosion.
  • 【ADVANTAGE】- Drag chain is designed to surround and guide flexible electrical cables and hydraulic or pneumatic hoses connected to moving automated machinery, they reduce wear and stress on cables and hoses, prevent entanglement.
  • The cable drag chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement.
  • 【APPLICATION】- The drag chain suitable for a variety of automation equipment, such as CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
Check Stock

Heyiarbeit 35x100mm Plastic Cable Wire Carrier Drag Chain 1M R100 with End Connectors Open Type for Electrical Machines CNC Black 1Pcs

  • Size: 35mm x 100mm/1.38" X 3.94"(Inner H x Outer W).
  • 【CUSTOM LENGTH】- You can change the length you need by connecting multiple drag chains or splitting a single drag chain.
  • 【FEATURE】- The appearance of this cable carrier chain is beautiful,and surface gloss.
  • Reinforced nylon, reduces the noise of the cable chain while moving, while increasing wear resistance.
  • Our drag chain is resistant to low temperature, wear and corrosion.
  • 【ADVANTAGE】- Drag chain is designed to surround and guide flexible electrical cables and hydraulic or pneumatic hoses connected to moving automated machinery, they reduce wear and stress on cables and hoses, prevent entanglement.
  • The cable drag chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement.
  • 【APPLICATION】- The drag chain suitable for a variety of automation equipment, such as CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
Check Stock