Categories

Best Cnc Spindle Kits

CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving

  • ️【CNC Spindle kit 500W】- 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free)..
  • ️【500W CNC Spindle motor】- Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03..
  • ️【Speed Power Switch】- Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle..
  • ️【 52mm Mount Bracket】- Made of high quality cast aluminum, this spindle motor bracket clamp is strong and durable. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm..
  • ️【ER11 Collet Chuck】- 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine..
Check Stock

Genmitsu CNC 3018-PRO Router Kit GRBL Control 3 Axis Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine, XYZ Working Area 300x180x45mm

  • This bundle includes a FoxAlien Masuter cnc router machine and the 300W spindle upgrade kit..
  • The Masuter cnc router supports upgrade to 300W spindle, which is more powerful. It can improve the engraving efficiency..
  • Masuter 4040 is a cost-effective CNC router with large working area of 400 x 380 x 55mm (15.75” x 14.96” x 2.16”)..
  • The control board is equipped with an upgraded 32-bit chip which works more efficient and stable. It also supports add-ons such as offline controller, 300W spindle and laser modules. (Add-ons sold separately).
  • Masuter 4040 is capable to engrave, cut and drill many kinds of material such as wood, MDF, acrylic, foam, resin, nylon, PCB, and aluminum etc..
Check Stock

500W CNC Router Machine, MYSWEETY 3 Axis 4540 CNC Metal Engraving Milling Machine for Carving Cutting Wood Acrylic MDF PCB Plastic, Working Area: 430*390*90mm(16.9*15.4*3.5inch)

  • 【500W Spindle & High Speed】 The upgraded 3-axis 4540 engraving machine is equipped with an 500W spindle for more power and higher efficiency, making it possible to cut stainless steel, aluminum and other metals. The maximum movement speed can reach 5000mm/min, the spindle speed range is 0-11000rpm/min.
  • 【Larger Working Area】 The cnc router machine has a larger engraving area, increased to 430*390*90 mm(16.9*15.4*3.5inch). The working table has precise scale lines, which is convenient for you to locate and measure the engraving material size.
  • 【Wide Application & Compatibility】 The CNC wood machine is compatible with GRBL software and supports systems such as Windows XP/7/8/10 and Mac OS. Suitable for engraving and carving stainless steel, wood, aluminum, brass, plexiglass, leather, PCB, MDF, acrylic, resin, nylon, carbon fiber, PCB, PVC, etc.
  • 【Easy to Assemble】 This CNC wood carving machine could be assembled in 15-30 minutes. The main components are already pre-assembled. Wires are clearly labeled for quick connection. The control board, power supply, emergency stop, and wires are integrated into a newly designed box for easy and safe operation. You just need several installation steps and wiring to start carving your projects.
Check Stock

CNCTOPBAOS Upgrade CNC 3018 Pro 3 Axis DIY Mini CNC Router Kit with GRBL Remote Control Offline Controller PVC PCB Acrylic Plastic Wood Cutting Engraving Carving Milling Machine

  • ...BL control systems, great cnc router machine for beginers.
  • you can operate this machine without connect the computer.
  • offline controller included a SD card reader to write into the root directory G-code files or NC file.
  • Support manually adjust X, Y, Z axis location as engraving starting point,manually open or close spindle..
  • ♞【Main Feature】 Working area:30x18x4.5cm.
  • Type: USB Port Desktop cnc router/Spindle: 775 spindle motor (12-36V) 24V:10000rpm/ Stepper Motor: Nema17 stepper motor,1.3A, phase resistance 2.1 ohms, torque 0.25N.m.
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module..
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items..
Check Stock

LUNYEE CNC Router Machine 3018-PLUS, 3 Axis 500W Desktop CNC Machine All Metal, Carving Milling Engraving Machine for Wood Acrylic Rubber Aluminum, XYZ Working Area 300x180mm

  • ... CNC motor and a 40mm laser module according to your needs. You have two machines in one in a sense. Meanwhile, the machine is equipped with 6 limit switches and an emergency stop switch which provides safety for you and your creations..
  • , , : NO PLASTIC FRAME PARTS or SPINDLE MOUNT! The body frame is extra-thick aluminum alloy with countersunk rail bores. Drives are Leadscrew driven. The solid steel rails are 12mm thick with bearing slides, stable for precise work and heavy loads..
  • - : WE ARE THE MANUFACTURER, this is how we are able to offer you a low price for this beautiful higher-end CNC Mill + Laser engraver machine. Again, please feel free to ask us any questions through Amazon, we are here to assist you 24/7. We are experts with CNC and laser machines and we can “talk technical” with you about parts, setting up your machine, settings optimization, and our available upgrade kits..
Check Stock

FoxAlien 4040-XE CNC Router Machine 300W Spindle + 20W Laser Module Kit

  • This bundle includes a FoxAlien 4040-XE cnc router machine and a 20W laser kit..
  • 4040-XE CNC Router uses 300W spindle and NEMA23 stepper motors, which are more powerful and efficient. Max moving speed is 2000mm/min and spindle speed range is 0~10000..
  • Large engravable area of 15.75”x15.75”x2.56” (400x400x65mm). It’s capable to handle both small and large material. The CNC machine is based on GRBL, it is compatible with GRBL-control software..
  • The FoxAlien 20W engraving module features a new technology "light beam compression", which have excellent performance in engraving delicate jobs and details..
  • The focus distance is fixed by 30mm. The package includes a positioning block for easy focusing. Electrical output: 20W.
Check Stock

Mophorn CNC Spindle Motor CNC Spindle Kits Water Cooled Spindle Motor For CNC Router Engraving Milling Machine 2.2KW

  • Technical Parameters: Spec: φ3.15 x 8.5 in (Diameter: 8 cm x Length: 21.5 cm).
  • ER20 Standard Collet: The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision....
  • Powerful Bearing: The water cooled spindle motor adopts imported bearings with high accuracy, precision, and durability. Significantly improve the....
  • Low Noise & Heat Dissipation: The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water....
  • Fine Workmanship: The body of the CNC router spindle is made of high-quality stainless steel, equipped with a pure copper rotor. The upgraded version....
Check Stock

GZYF CNC Spindle Clamp 65MM 80mm Mounting Bracket for Spindle/Silver, 65mm Gold

  • This motor bracket clamp would be a great replacement for CNC part..
  • Made of high quality aluminum material, this spindle motor bracket clamp is strong and durable..
  • Applied to various occasions, such as 3D printing, CNC engraving machines..
  • The unique card slot, the screw nut firmly stuck, easy to lock the spindle..
  • Two inner diameter: 65mm, 80mm that you can choose for different needs..
Check Stock

Milling Machine

  • 4040-XE CNC Router uses 300W spindle and NEMA23 stepper motors, which are more powerful and efficient. Max moving speed is 2000mm/min and spindle....
  • Control board, power supply, emergency stop, and wires are integrated into a newly design box, which is simple for operation, easy to clean and safe.....
  • It’s capable to engrave, cut and drill many different kinds of material such as wood, metal, MDF, acrylic, foam, resin, nylon, carbon fiber, PCB and....
  • Large engravable area of 15.75”x15.75”x2.56” (400x400x65mm). It’s capable to handle both small and large material. The CNC machine is based on....
  • Easy assembly. Main parts are pre-assembled, it only takes 15-30mins to fully assembly. Wires are labeled clearly for fast connection and bundled into....
Check Stock

MYSWEETY 2 in 1 7000mW CNC 3018Pro-M Engraver Machine, GRBL Control 3 Axis Mni DIY CNC Router with 7W Module Kit, Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine with Offline Controller

  • ...ne, metal surface paint, metal surface plating etc. Can not work on metal, iron, glass, 201/304 stainless steel, jewelry or silver..
  • ⚒️【Large Working Area】- With an effective engraving area of 300 x 180 x 45 mm (11.8 x 7.1 x 1.8”), the 3018pro-M can easily accommodate most projects. Control software: GRBL.
  • Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10..
  • ⚒️【The main two advantages of offline controller】- 1,do not need to connect the computer.
  • 2,do not need to download files. Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle, manully open or close cooling fan..
  • ⚒️【Simple Assembly】- Assembly instructions are provided, but if you get stuck, contact us with any questions that arise. Thank you!.
Check Stock

RATTMMOTOR CNC 1610 PRO CNC Wood Router Machine Kit, 3 Axis GRBL Control DIY Mini CNC Milling Engraver Engraving Machine with CNC Offline Controller for Plastic/Wood/Acrylic/PVC/PCB/Wood

  • 【Upgrade Version CNC 1610 PRO】Frame size: 30x26x25CM. Working area:18x10x4.5CM. Material: Aluminum Alloy. Spindle: 775 spindle motor (12-24V) 24V:10000r/min. Stepper motor: 42 stepper motor, 12V, phase current 1.3A, phase resistance 2.1 ohms, torque 0.25N.m.
  • 【Simple Assembly】This mini cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and USB flash drive of all the files. Please let us know if you need any help..
  • 【Applicable Engraving Material】CNC 1610 PRO machine can not only engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and so on, but also soft metal like copper, aluminum and the similar materials. Howerever, harder materials cannot be engraved such as glass, hard metal, jade, ect..
  • 【GRBL Control Board/Software】This machine can be controlled by Grblcontrol/Candle software after connecting the control board to a coumpter via USB port. The control board is equipped with a fan to force heat dissipation, also has more fuctions such as support spindle PWM speed, limit switch, tool setting, steering....
Check Stock

CNCTOPBAOS 3 Axis Desktop DIY Mini CNC 3018 Router Kit GRBL Control Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine Working Area 30x18x4.5cm

  • According to the instructions,the machine is easy to assemble..
  • ♞【Spindle&Stepper Motor】775 spindle motor (12-36V) 24V:10000r / min.
  • Collet: ER11 3.175mm (Can be equipped with 0-7mm).
  • Nema17 stepper motor 1.3A/0.25N.m/42x42x34mm.
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module.【Working area】30x18x4.5cm.
  • Type:USB port Desktop cnc router【System requirements】Windows XP / Win 7 / Win 8 / Win 10 / Linux.
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items. if you have the module,you also can change ....
Check Stock

Mophorn Spindle Motor 4KW Square Air Cooled Spindle Motor ER25 Collect 18000RPM 220V CNC Spindle Motor for CNC Router Engraving Milling Machine 4KW Air Cooled

  • Technical Parameters: Spec: φ3 x 13 in (Diameter: 7.5 cm x Length: 33.9 cm).
  • ER25 Standard Collet: The collet of the CNC router spindle is quenched with manganese steel, and the runout is less than 0.002mm, which has high....
  • Powerful Bearing: The air spindle motor adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and....
  • Low Noise & Heat Dissipation: The dynamic balance technology can effectively reduce the noise during use. The scientifically designed air cooling....
  • Wide Application: The CNC spindle motor kit is mainly used for engraving machines or frequency converters. It uses air circulation to cool the heat....
Check Stock